Influence of operating conditions on ceramic ultrafiltration membrane performance when treating textile effluents

This work studies the performance of three commercial ceramic ultrafiltration membranes (ZrO(2)-TiO(2)) treating raw effluent from a textile industry. The effect of crossflow velocity at 3, 4 and 5 m s(-1) as well as membrane characteristics, such as molecular weight cut-off (30, 50 and 150 kDa), on process performance were studied. Experiments were carried out in concentration mode in order to observe the effect of volume reduction factor simultaneously. Results showed a combined influence of both crossflow velocity and molecular weight cut-off on flux performance. TOC and COD removals up to 70% and 84% respectively were reached. On the other hand, almost complete color (>97%) and turbidity (>99%) removals were achieved for all the membranes and operating conditions.     

The Basic Constructive Logic for Negation-Consistency

In this paper, consistency is understood in the standard way, i.e. as the absence of a contradiction. The basic constructive logic B_Kc4, which is adequate to this sense of consistency in the ternary relational semantics without a set of designated points, is defined. Then, it is shown how to define a series of logics by extending B_Kc4 up to minimal intuitionistic logic. All logics defined in this paper are paraconsistent logics.     

A model of checkpoint behavior for applications that have I/O

Due to the increase and complexity of computer systems, reducing the overhead of fault tolerance techniques has become important in recent years. One technique in fault tolerance is checkpointing, which saves a snapshot with the information that has been computed up to a specific moment, suspending the execution of the application, consuming I/O resources and network bandwidth. Characterizing the files that are generated when performing the checkpoint of a parallel application is useful to determine the resources consumed and their impact on the I/O system. It is also important to characterize the application that performs checkpoints, and one of these characteristics is whether the application does I/O. In this paper, we present a model of checkpoint behavior for parallel applications that performs I/O; this depends on the application and on other factors such as the number of processes, the mapping of processes and the type of I/O used. These characteristics will also influence scalability, the resources consumed and their impact on the IO system. Our model describes the behavior of the checkpoint size based on the characteristics of the system and the type (or model) of I/O used, such as the number I/O aggregator processes, the buffering size utilized by the two-phase I/O optimization technique and components of collective file I/O operations. The BT benchmark and FLASH I/O are analyzed under different configurations of aggregator processes and buffer size to explain our approach. The model can be useful when selecting what type of checkpoint configuration is more appropriate according to the applications’ characteristics and resources available. Thus, the user will be able to know how much storage space the checkpoint consumes and how much the application consumes, in order to establish policies that help improve the distribution of resources.

     

Perceived production complexity – understanding more than parts of a system

To successfully manage today’s complex production systems it is essential to study operators’ perception of the system. The paper presents perceived production complexity assessed at seven manufacturing companies with the CompleXity Index (CXI) method. While other methods have measured product variants, layout, work content, tools and information items, CXI combines them into three areas. These three complexity areas (Station design, Work variance and Disturbance handling) help to create an understanding of the complex system by visualising how they contribute to complexity, and show the need to support the operators’ ability to handle the varying work.     

Control Charts with Variable Dimension for Linear Combination of Poisson Variables

This article analyzes the simultaneous control of several correlated Poisson variables by using the Variable Dimension Linear Combination of Poisson Variables (VDLCP) control chart, which is a variable dimension version of the LCP chart. This control chart uses as test statistic, the linear combination of correlated Poisson variables in an adaptive way, i.e. it monitors either p₁ or p variables (p₁ < p) depending on the last statistic value. To analyze the performance of this chart, we have developed software that finds the best parameters, optimizing the out‐of‐control average run length (ARL) for a shift that the practitioner wishes to detect as quickly as possible, restricted to a fixed value for in‐control ARL. Markov chains and genetic algorithms were used in developing this software. The results show performance improvement compared to the LCP chart. Copyright © 2015 John Wiley & Sons, Ltd.     

Manipulation of matter by electric and magnetic fields: Toward novel synthesis and processing routes of inorganic materials

The use of external electric and magnetic fields for the synthesis and processing of inorganic materials such as metals and ceramics has seen renewed interest in recent years. Electromagnetic energy can be utilized in different ways to improve or accelerate phase formation and stabilization, chemical ordering, densification and coarsening of particle-based materials (pore elimination and grain growth), and mechanical deformation (plasticity and creep). In these new synthesis and processing routes, the resulting microstructures and macroscopic material behavior are determined by the interaction of the applied fields with defects such as single or clustered point defects, dislocation networks, and interfaces. Multiscale experimental investigations and modeling are necessary to unveil the mechanisms underlying this field-assisted manipulation of matter.     

A SLIT THROUGH PHOTOGRAPHY

Post-war experimental and conceptual photography in former Yugoslavia has only rarely been the subject of detailed study and interpretation. In considering this period, it is necessary to take into account several factors, including the absence of permanent exhibition spaces for photography, the lack of magazines in which photographic themes were presented and discussed, the impossibility of studying the field of photography and, finally, the inadequate knowledge and application of contemporary criticism and theories of photography. Nevertheless, from the mid-1950s onwards it is possible to note a variety of innovations in the field, in terms of both form and subject-matter. This article considers rare instances of institutional support for progressive photography-related events and unique, intellectual-poetic works. After the break-up of Yugoslavia, there is a dominant tendency to nationalize art created in the former state, thus ignoring the specific Yugoslav cultural field as well as the European context. Based on a methodology which surpasses the national (but still acknowledges it) and searches for meaning within the broader socio-political space to which art is referring, the research aims to change the paradigm of the peripheral position and general ignorance of the circumstances under which this innovative practice emerges.     

The effects of different roster schedules on sleep in miners

Shiftwork involving early morning starts and night work can affect both sleep and fatigue. This study aimed to assess the impact of different rostering schedules at an Australian mine site on sleep and subjective sleep quality. Participants worked one of four rosters;

4 × 4 (n = 14) 4D4O4N4O

7 × 4 (n = 10) 7D4O7N40

10 × 5 (n = 17) 5D5N50

14 × 7 (n = 12) 7D7N70

Sleep (wrist actigraphy and sleep diaries) was monitored for a full roster cycle including days off. Total sleep time (TST) was longer on days off (7.0 ± 1.9) compared to sleep when on day (6.0 ± 1.0) and nightshifts (6.2 ± 1.6). Despite an increase in TST on days off, this may be insufficient to recover from the severe sleep restriction occurring during work times. Restricted sleep and quick shift-change periods may lead to long-term sleep loss and associated fatigue.