The effect of adding devulcanized rubber on the thermomechanical properties of recycled polypropylene

This work aims to investigate the effect of adding vulcanized or partially devulcanized rubbers on recycled polypropylene (PPr), considering thermomechanical and morphological properties. The study proposes to better understand how structural changes underwent by rubber (after the devulcanization) contributed to improving the mechanical properties of the PPr. The PPr/rubber blends were prepared by a co-rotating twin-screw extruder and then were injected. The blends composed of the most devulcanized rubbers by microwaves with refined microstructure showed higher values of elongation at break and toughness. Data showed that the devulcanization process applied to the rubber interfered positively in its adhesion to the PPr. Data from dynamic mechanical analysis and atomic force microscopy indicated that the most devulcanized rubbers presented an interface more connected to PPr. These chemical interactions possibly impacted the mechanical properties of the PPr. Moreover, dilatation processes favored the fracture mechanisms of the PPr when rubber was added to it.     

Experimental study of stable surfaces for anti-slug control in multi-phase flow

Severe slugging flow is always challenging in oil & gas production, especially for the current offshore based production. The slugging flow can cause a lot of problems, such as those relevant to production safety, fatigue as well as capability. As one typical phenomenon in multi-phase flow dynamics, the slug can be avoided or eliminated by proper facility design or control of operational conditions. Based on a testing facility which can emulate a pipeline-riser or a gas-lifted production well in a scaled-down manner, this paper experimentally studies the correlations of key operational parameters with severe slugging flows. These correlations are reflected through an obtained stable surface in the parameter space, which is a natural extension of the bifurcation plot. The maximal production opportunity without compromising the stability is also studied. Relevant studies have already showed that the capability, performance and efficiency of anti-slug control can be dramatically improved if these stable surfaces can be experimentally determined beforehand. The paper concludes that obtaining the stable surface on the new developed map can significantly improve the production rate in a control scheme. Even though the production rate can be further improved by moving the stable surface using advanced control strategies, the constant inputs can in some cases be preferable due to the easier implementation.     

Providing security and fault tolerance in P2P connections between clouds for mHealth services

The mobile health (mHealth) and electronic health (eHealth) systems are useful to maintain a correct administration of health information and services. However, it is mandatory to ensure a secure data transmission and in case of a node failure, the system should not fall down. This fact is important because several vital systems could depend on this infrastructure. On the other hand, a cloud does not have infinite computational and storage resources in its infrastructure or would not provide all type of services. For this reason, it is important to establish an interrelation between clouds using communication protocols in order to provide scalability, efficiency, higher service availability and flexibility which allow the use of services, computing and storage resources of other clouds. In this paper, we propose the architecture and its secure protocol that allows exchanging information, data, services, computing and storage resources between all interconnected mHealth clouds. The system is based on a hierarchic architecture of two layers composed by nodes with different roles. The routing algorithm used to establish the connectivity between the nodes is the shortest path first (SPF), but it can be easily changed by any other one. Our architecture is highly scalable and allows adding new nodes and mHealth clouds easily, while it tries to maintain the load of the cloud balanced. Our protocol design includes node discovery, authentication and fault tolerance. We show the protocol operation and the secure system design. Finally we provide the performance results in a controlled test bench.     

Voronoi-based coverage control with anisotropic sensors and experimental case study

In this paper, we investigate coverage control problem for mobile sensor networks. The novelty is to consider an anisotropic sensor model whose performance depends not only on the distance but also on the orientation to a target point. By adapting Lloyd algorithm, a distributed control law is derived. Aside from coverage, we also show that the control law guarantees collision avoidance between the agents. The performance of the control laws is demonstrated through not only numerical simulation but also experiments on a mobile robot test bed.     

Multiphoton Lithography as a Promising Tool for Biomedical Applications

Multiphoton lithography (MPL) is a powerful and useful structuring tool capable of generating 2D and 3D arbitrary micro- and nanometer features of various materials with high spatial resolution down to nm-scale. This technology has received tremendous interest in tissue engineering and medical device manufacturing, due to its ability to print sophisticated structures, which is difficult to achieve through traditional printing methods. Thorough consideration of two-photon photoinitiators (PIs) and photoreactive biomaterials is key to the fabrication of such complex 3D micro- and nanostructures. In the current review, different types of two-photon PIs are discussed for their use in biomedical applications. Next, an overview of biomaterials (both natural and synthetic polymers) along with their crosslinking mechanisms is provided. Finally, biomedical applications exploiting MPL are presented, including photocleaving and photopatterning strategies, biomedical devices, tissue engineering, organoids, organ-on-chip, and photodynamic therapy. This review offers a helicopter view on the use of MPL technology in the biomedical field and defines the necessary considerations toward selection or design of PIs and photoreactive biomaterials to serve a multitude of biomedical applications.     

A model of checkpoint behavior for applications that have I/O

Due to the increase and complexity of computer systems, reducing the overhead of fault tolerance techniques has become important in recent years. One technique in fault tolerance is checkpointing, which saves a snapshot with the information that has been computed up to a specific moment, suspending the execution of the application, consuming I/O resources and network bandwidth. Characterizing the files that are generated when performing the checkpoint of a parallel application is useful to determine the resources consumed and their impact on the I/O system. It is also important to characterize the application that performs checkpoints, and one of these characteristics is whether the application does I/O. In this paper, we present a model of checkpoint behavior for parallel applications that performs I/O; this depends on the application and on other factors such as the number of processes, the mapping of processes and the type of I/O used. These characteristics will also influence scalability, the resources consumed and their impact on the IO system. Our model describes the behavior of the checkpoint size based on the characteristics of the system and the type (or model) of I/O used, such as the number I/O aggregator processes, the buffering size utilized by the two-phase I/O optimization technique and components of collective file I/O operations. The BT benchmark and FLASH I/O are analyzed under different configurations of aggregator processes and buffer size to explain our approach. The model can be useful when selecting what type of checkpoint configuration is more appropriate according to the applications’ characteristics and resources available. Thus, the user will be able to know how much storage space the checkpoint consumes and how much the application consumes, in order to establish policies that help improve the distribution of resources.

     

Perceived production complexity – understanding more than parts of a system

To successfully manage today’s complex production systems it is essential to study operators’ perception of the system. The paper presents perceived production complexity assessed at seven manufacturing companies with the CompleXity Index (CXI) method. While other methods have measured product variants, layout, work content, tools and information items, CXI combines them into three areas. These three complexity areas (Station design, Work variance and Disturbance handling) help to create an understanding of the complex system by visualising how they contribute to complexity, and show the need to support the operators’ ability to handle the varying work.     

Control Charts with Variable Dimension for Linear Combination of Poisson Variables

This article analyzes the simultaneous control of several correlated Poisson variables by using the Variable Dimension Linear Combination of Poisson Variables (VDLCP) control chart, which is a variable dimension version of the LCP chart. This control chart uses as test statistic, the linear combination of correlated Poisson variables in an adaptive way, i.e. it monitors either p₁ or p variables (p₁ < p) depending on the last statistic value. To analyze the performance of this chart, we have developed software that finds the best parameters, optimizing the out‐of‐control average run length (ARL) for a shift that the practitioner wishes to detect as quickly as possible, restricted to a fixed value for in‐control ARL. Markov chains and genetic algorithms were used in developing this software. The results show performance improvement compared to the LCP chart. Copyright © 2015 John Wiley & Sons, Ltd.     

Enhanced assessment of ageing phenomena in steel structures based on materials data and non‐destructive testing

The increasing amount of ageing civil steel infrastructure requests an enhanced assessment of this infrastructure in terms of determining its residual fatigue life in a more realistic way than this has been done in the past. Often the relevant materials data for cyclic loading of such an ageing infrastructure is not available and its retrieval turns out to be relatively cumbersome bearing the urgency in data availability and continuous cost pressure in mind. This article addresses different approaches and techniques on how materials data for cyclic loading can be obtained at a fraction of the effort compared to state‐of‐the‐art techniques, considering load increase tests, non‐destructive testing techniques and finally even a stepped bar specimen allowing a complete set of materials data (stress‐strain behaviour and stress‐ and strain‐life curve) to be obtained with a single specimen in the end only. Options for ’digitizing’ materials data evaluation are discussed and some prospect on application of those novel approaches and techniques in damage accumulation assessments on real steel infrastructure is provided.