Organic‐polymer thin‐film transistors for active‐matrix flat‐panel displays?

Abstract— Organic‐polymer‐based thin‐film transistors (OP‐TFTs) look very promising for flexible, large‐area, and low‐cost organic electronics. In this paper, we describe devices based on spin‐coated organic polymer that reproducibly exhibit field‐effect mobility values around 5 × 10^?3 cm²/V‐sec. We also address fabrication, performance, and stability issues that are critical for the use of such devices in active‐matrix flat‐panel displays.     

Radio‐opaque fecal impaction and pseudo‐occlusion in a dialyzed patient taking lanthanum carbonate

Lanthanum therapy is an efficient therapy of hyperphosphoremia by chelating phosphore in the digestive tract. Lanthanum is a silvery white metallic element that belongs to group 3 of the periodic table. This drug is lightly absorbed and has low water solubility. It should be borne in mind that abdominal X‐rays of patients taking lanthanum carbonate may have a radio‐opaque appearance typical of imaging agents. This characteristic is suggested to confirm adherence of the patient by doing an abdominal X‐ray. We describe in our case a particular good compliant patient with slow digestive transit, which ends by pseudo‐occlusion.     

Geometry control of the junction between two fractal curves

The general objective of our work is to create a geometric modeller based on iterative processes. With this objective in mind, we have to provide tools that work with fractal objects in the same manner as with objects of classical topology. In this article we focus on the constructing of an intermediate curve between two other curves defined by different iterative construction processes. A similar problem often arises with subdivision surfaces, when the goal is to connect two surfaces with different subdivision masks. We start by dealing with curves, willing to later generalise our approach to surfaces. We formalise the problem with the Boundary Controlled Iterated Function System model. Then we deduct the conditions that guarantees continuity of the intermediate curve. These conditions determine the structure of subdivision matrices. By studying the eigenvalues of the subdivision operators, we characterise the differential behaviour at the connection points between the curves and the intermediate one. This behaviour depends on the nature of the initial curves and coefficients of the subdivision matrices. We also suggest a method to control the differential behaviour by adding intermediate control points.     

Simultaneous Microwave Extraction and Separation of Volatile and Non-Volatile Organic Compounds of Boldo Leaves. From Lab to Industrial Scale

Microwave extraction and separation has been used to increase the concentration of the extract compared to the conventional method with the same solid/liquid ratio, reducing extraction time and separate at the same time Volatile Organic Compounds (VOC) from non-Volatile Organic Compounds (NVOC) of boldo leaves. As preliminary study, a response surface method has been used to optimize the extraction of soluble material and the separation of VOC from the plant in laboratory scale. The results from the statistical analysis revealed that the optimized conditions were: microwave power 200 W, extraction time 56 min and solid liquid ratio of 7.5% of plants in water. Lab scale optimized microwave method is compared to conventional distillation, and requires a power/mass ratio of 0.4 W/g of water engaged. This power/mass ratio is kept in order to upscale from lab to pilot plant.     

Transient and steady states of Gd2Zr2O7 and 2ZrO2∙Y2O3 (ss) interactions with calcium magnesium aluminium silicates

Reactions between calcium magnesium aluminium silicates (CMAS) and Gd₂Zr₂O₇ or 2ZrO₂?Y₂O₃ (ss) are investigated within a temperature range of 1200–1300 °C and for durations of 1 h–100 h. The evolution of CMAS penetration depth in Gd₂Zr₂O₇ and 2ZrO₂?Y₂O₃ (ss) pellets varies considerably depending on the interaction time. A quantitative analysis of the nature and composition of phases observed in stationary conditions (powder/powder interaction) is performed by SEM-FEG coupled with WDS analyses using micro-agglomerated nanoparticles of Gd₂Zr₂O₇ and 2ZrO₂?Y₂O₃. Faster kinetics of the gadolinium-based system are illustrated through an analysis of the morphology of the reaction area and of the resulting CMAS tightness of reaction products. The compositions and quantities of reaction products observed at equilibrium are very similar for the two systems, but transient states are significantly different.     

Updated safety analysis of ITER

An updated version of the ITER Preliminary Safety Report has been produced and submitted to the licensing authorities. It is revised and expanded in response to requests from the authorities after their review of an earlier version in 2008, to reflect enhancements in ITER safety provisions through design changes, to incorporate new and improved safety analyses and to take into account other ITER design evolution. The updated analyses show that changes to the Tokamak cooling water system design have enhanced confinement and reduced potential radiological releases as well as removing decay heat with very high reliability. New and updated accident scenario analyses, together with fire and explosion risk analyses, have shown that design provisions are sufficient to minimize the likelihood of accidents and reduce potential consequences to a very low level. Taken together, the improvements provided a stronger demonstration of the very good safety performance of the ITER design.     

A concept of reactive compatibilizer‐tracer for studying reactive polymer blending processes

A concept called reactive compatibilizer‐tracer is proposed. The latter bears reactive groups capable of reacting with its counterpart on forming a copolymer for in situ compatibilization, and fluorescent labels allowing determining very small amounts of the in situ formed compatibilizer and formation of micelles when it occurs. Owing to this concept, it is shown that a reactive compatibilizer may be very efficient at the beginning of a reactive blending process and may suddenly become completely inefficient, resulting in an abrupt and drastic increase in size of the dispersed phase domains. © 2015 American Institute of Chemical Engineers AIChE J, 62: 359–366, 2016     

Sintering of α-alumina for highly transparent ceramic applications

In this paper we present our results on the sintering of α alumina ceramics by hot isostatic pressing. It describes a simple method for obtaining precise relative density values on our almost 100% dense samples. Then, transparency results are discussed with respect to grain size and residual porosity measurements, comparing them to scattering calculations. Our results are not far from the best reported transmission values: almost 60% for a 1 mm thick sample. The other 40% diffuse light comes from the birefringence of alumina for the most part. However, they are transparent enough to see detailed structures at several kilometers through them.     

Comparison of the water-soluble carbohydrate composition and fructan structures of Agave tequilana plants of different ages

The composition of water-soluble carbohydrates from Agave tequilana plants of 2, 4 and 6½ years were compared by HPLC, HPAEC-PAD, MALDI-TOF-MS and GC–MS. The plants of 2 years exhibited the highest levels of free monosaccharide and low molecular weight fructans (DP 3–DP 6) with potential application as prebiotics. A maximum of fructan polymerisation was achieved at 4 years with mean DP from 3 to 30, then it was decreased at 6½ years with mean DP from 4 to 24. The linkage analysis showed an increase and decrease in the branching degree from 2 to 6½ years with a maximum at 4 years, correlated to changes in t-β-d-Fruf linkages with increased and decreased synthesis of (2→1) and (2→6)-β-d-Fruf as well as 1,6-di-β-d-Fruf linkages.