Enhancements in sugar immobilization in polymeric macroporous matrices for affinity capture

The use of macroporous monolithic matrices in the purification of biocompounds is constantly growing and developing. In this work, the objective was to optimize the quantity of N-acetyl-D-glucosamine (D-GlcNAc) immobilized on the surface of macroporous polymeric cryogels for capture of lectins from less clarified solutions. Surface response methodology was applied and it was observed that the immobilization temperature of the glutaraldehyde (GLU) and the D-GlcNAc concentration influenced the amount of sugar immobilized. The matrices produced with 1.1% of allyl glycidyl ether were functionalized by GLU. Optimal maximum condition was obtained with mean value of 160.39 ± 26.38 mg of D-GlcNAc immobilized per gram of dry cryogel. Characterization analyses of the matrices showed that the activation process was effective, maintaining the macroporous structure and physical characteristics. The adsorbents produced were tested for capture of lectins from a crude protein solution of barley. At tested conditions, adsorbent capture around 11% of protein in solution but reduce the hemaglutinating capacity in 40%, demonstrating its selectivity. The cryogels functionalized with D-GlcNAc present potential for use in capture compounds by affinity with carbohydrates, such as lectins. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2019 , 136, 47956.     

Sintering of α-alumina for highly transparent ceramic applications

In this paper we present our results on the sintering of α alumina ceramics by hot isostatic pressing. It describes a simple method for obtaining precise relative density values on our almost 100% dense samples. Then, transparency results are discussed with respect to grain size and residual porosity measurements, comparing them to scattering calculations. Our results are not far from the best reported transmission values: almost 60% for a 1 mm thick sample. The other 40% diffuse light comes from the birefringence of alumina for the most part. However, they are transparent enough to see detailed structures at several kilometers through them.     

Anticoagulant, Antioxidant and Antitumor Activities of Heterofucans from the Seaweed Dictyopteris delicatula

In the present study, six families of sulfated polysaccharides were obtained from seaweed Dictyopteris delicatula by proteolytic digestion, followed by acetone fractionation and molecular sieving on Sephadex G-100. Chemical analyses demonstrated that all polysaccharides contain heterofucans composed mainly of fucose, xylose, glucose, galactose, uronic acid, and sulfate. The fucans F0.5v and F0.7v at 1.0 mg/mL showed high ferric chelating activity (～45%), whereas fucans F1.3v (0.5 mg/mL) showed considerable reducing power, about 53.2% of the activity of vitamin C. The fucan F1.5v presented the most prominent anticoagulant activity. The best antiproliferative activity was found with fucans F1.3v and F0.7v. However, F1.3v activity was much higher than F0.7v inhibiting almost 100% of HeLa cell proliferation. These fucans have been selected for further studies on structural characterization as well as in vivo experiments, which are already in progress.     

Mechanism of anodic oxidation of molybdenum in nearly-neutral electrolytes studied by electrochemical impedance spectroscopy and X-ray photoelectron spectroscopy

Anodic oxidation of molybdenum in weakly acidic, nearly neutral and weakly alkaline electrolytes was studied by voltammetric and electrochemical impedance spectroscopic measurements in a wide potential and pH range. Current vs. potential curves were found to exhibit two pseudo-Tafel regions suggesting two parallel pathways of the dissolution process. Electrochemical impedance spectra indicated the presence of at least two reaction intermediates. X-ray photoelectron spectroscopic (XPS) results pointed to the formation of an oxide containing Mo(IV), Mo(V) and Mo(VI), the exact ratio between different valence states depending on potential and pH of the solution. A physico-chemical model of the processes is proposed and a set of kinetic equations for the steady-state current vs. potential curve and the impedance response are derived. The model is found to reproduce quantitatively the current vs. potential curves and impedance spectra at a range of potentials and pH and to agree qualitatively with the XPS results. Subject to further improvement, the model could serve as a starting point for the optimization of the electrochemical fabrication of functional molybdenum oxide coatings.     

Transitional emulsion polymerisation: Zero-one to pseudo-bulk

The transitional behaviours of emulsion polymerisation for styrene and butyl acrylate (BA) monomers from zero-one to pseudo-bulk regime were mechanistically investigated. A dynamic mathematical model, which incorporates cross-over mechanism from zero-one to pseudo-bulk kinetics was developed for emulsion polymerisation and compared with experimental data for conversion, particle size and molar mass. Particles smaller than cross-over size follow zero-one kinetics and particles greater than cross-over size, they follow pseudo-bulk kinetics. In our mechanistic approach, particles nucleated from micelles, grow until the cross-over size is attained, based on zero-one kinetics, and subsequently continue to grow based on pseudo-bulk kinetics. Key findings from our work are that the developed transitional model predictions agree reasonably with experimental data on process and product attributes such as conversion, average molecular weight, molecular weight distribution (MWD), average particle size and particle size distribution (PSD). Optimal strategies for semibatch operation was developed using reaction temperature and monomer feed rate as process variables with specified initial conditions.     

Thermal and mechanical properties of polypropylene/wood‐flour composites

In this research, polypropylene/wood‐flour composites (WPCs) were blended with different contents of wood and/or maleated polypropylene (MAPP) and clay. We found that the addition of MAPP or clay in the formulation greatly improved the dispersion of the wood fibers in the composite; this suggested that MAPP or clay may have played the role of an adhesion promoter in the WPCs. The results obtained with clay indicate that it also acted as a flame retardant. The thermal tests carried out with the produced samples showed an increased crystallization temperature (T_c), crystallinity, and melting temperature (T_m) with wood loading. The increase of the two former parameters was explained by the incorporation of wood flour, which played the role of nucleating agent and induced the crystallization of the matrix polymer. On the other hand, the T_m increase was ascribed to the insulating properties of wood, which hindered the movement of heat conduction. The effects of UV irradiation on T_m and T_c were also examined. T_c increased with UV exposure time; this implied that UV degradation generated short chains with low molecular weight that could move easily in the bulk of the sample and, thus, catalyze early crystallization. The flexural strength and modulus increased with increasing wood‐flour content. In contrast, the impact strength and tensile strength and strain decreased with increasing wood‐flour content. All of these changes were related to the level of dispersion of the wood flour in the polymeric matrix. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Magnetic polystyrene–palygorskite nanocomposite obtained by heterogeneous phase polymerization to apply in the treatment of oily waters

Water contaminated by oil poses challenges to the management of water resources. Magnetic nanoparticles has been issue of different potential applications including remotion oil from water. Magnetic polystyrene–palygorskite nanocomposites were prepared by a heterogeneous phase polymerization for the removal of organic contaminants from water. The organo‐Fe₃O₄‐palygorskite nanoparticles were coated with polystyrene, forming water repellent and oil absorbing surfaces to promote the removal of oil from the surfaces of nanocomposites by applying an external magnetic field. X‐ray fluorescence, X‐ray diffraction, scanning electron microscopy, zeta potential and size distribution measurement, surface area determination by BET, density measurement by He pycnometry, carbon grade determination, thermogravimetric analysis, Fourier‐transform infrared spectroscopy, Raman spectroscopy, and evaluation of hydrophobicity by contact angle were used to characterize the nanoparticles. The magnetic nanocomposite obtained showed excellent hydrophobicity, around 78° contact angle. In addition, oil removal capability tests were also performed, according to which the preliminary results indicated removal of approximately 98% of oil in synthetic oily water samples. The oil–water separation using this magnetic nanocomposite provides a promising alternative strategy for water treatment. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2018 , 135, 46162.     

Block Copolymer Composite Synthesis in a Mechanistic Approach

Carbon nanotubes-block copolymer composites were synthesized via reversible addition–fragmentation chain transfer living emulsion mechanism, based on zero–one and pseudo-bulk kinetics. In conjunction with multiwalled carbon nanotubes, ab initio reversible addition–fragmentation chain transfer homopolymerization of styrene and butyl acrylate, respectively, was carried out using xanthate-based reversible addition–fragmentation chain transfer agent through ultrasonified macroemulsion and miniemulsion. Then, the second and third monomer were applied at stage II and III, respectively, to produce multiwalled carbon nanotube diblock and triblock copolymer composites such as multiwalled carbon nanotube-b-poly(styrene)-co-polybutyl acrylate-co-polymethyl acrylate and multiwalled carbon nanotube-b-polybutyl acrylate-co-polymethyl acrylate-co-poly(styrene). As multiwalled carbon nanotube-homopolymer proceeds to diblock and triblock, thermal resistance of multiwalled carbon nanotube block composite products is enhanced. A mechanistic approach of reversible addition–fragmentation chain transfer living macroemulsion and miniemulsion polymerizations, with the purified multiwalled carbon nanotubes enables us to control the composite properties such as thermal degradation, mechanical strength, and glass transition temperature of multiwalled carbon nanotube-block copolymer composites, in conjunction with reaction conditions, monomer type, blocking sequence, particle size, and molecular weight.     

Modification of coconut fibers with polyaniline for manufacture of pressure‐sensitive devices

This article studies the modification of coconut fibers with polyaniline (PAni) with help of statistical experimental design techniques. The main factors studied here were the techniques used for particle dispersion (sonication vs. magnetic stirring) and the type of initiator (ammonium persulfate, APS, vs. ammonium cerium sulfate dihydrate, Ce(IV)). The obtained materials were characterized through low field nuclear magnetic resonance, small‐and wide‐angle X‐ray scattering, scanning electron microscopy, fourier transform infrared spectroscopy, and ultraviolet–visible spectroscopy. Additionally, the electrical resistivities and respective sensitivities to variations of the applied pressure were evaluated for all obtained samples, with help of standard volume resistivity measurements and electro‐mechanical tests. The materials prepared through magnetic stirring with APS presented the best electrical and electromechanical properties, although materials prepared through sonication with Ce(IV) also presented good electrical and electromechanical properties and could be prepared much faster. As a consequence, modification of coconut fibers with PAni, using sonication as the particle dispersion technique and Ce(IV) as initiator, constitutes a very promising procedure for manufacture of pressure‐sensitive devices. POLYM. ENG. SCI., 54:2887–2895, 2014. © 2014 Society of Plastics Engineers