Effects of secretory and osmotic diarrhea on rats intestinal function and morphology

In order to compare intestinal morphology and function, diarrhea was produced in rats using laxatives in the diet. The 14 day study included two groups of rats with diarrhea (osmotic or secretory), two groups without diarrhea but with a degree of malnutrition which was similar to that seen in the rats with diarrhea (malnourished without diarrhea) and a well-nourished group (control). The inclusion of laxatives(lactose or bisoxatin acetate) cause a reduction in food intake, diarrhea an malnutrition. It also caused a reduction in dietary protein and fat digestibility which was proportional to the severity of diarrhea and more pronounced in secretory diarrhea. In the malnourished rats without diarrhea, malnutrition did not affect their absorptive function. Both in the rats with secretory and osmotic diarrhea an intestinal hypertrophy was observed. This hypertrophy was proportional to the severity of diarrhea and independent of its aetiology. In the intestines of the rats with both types of diarrhea there was inflammation, a greater number of mitotic figures but the flattening of the villi seen in the malnourished rats without diarrhea was not seen. In osmotic diarrhea there was, in addition, a patchy damage of the surface of the jejunal mucosa and an increment in the number of goblet cells, indicating a more severe intestinal deterioration. Since despite this greater deterioration, these rats absorbed more protein and fat we concluded that the alterations in intestinal morphology seen in this study was not predictive of intestinal function. The study also showed that diarrhea had a trophic effect on the intestine which did not occur in malnourished rats without diarrhea.     

Study of the high temperature oxidation performance of Thermal Barrier Coatings with HVOF sprayed bond coat and incorporating a PVD ceramic interlayer

The performance of an intermediate Cr₃C₂ ceramic layer applied by PVD between the bond coat and the ceramic top coat in a TBC system was evaluated. The thickness of the transitional layer was kept around 1–2 μm. Two substrate materials and two distinct bond coats were combined in the tests. High Velocity Oxygen Fuel (HVOF) and Atmospheric Plasma Spraying (APS) were used respectively for bond coat and top coat deposition. Isothermal oxidation tests were performed at 1000 °C in static air atmosphere. Thermal grown oxide (TGO) was measured and correlated to the exposition times. Results are discussed in terms of the TGO growth rate and changes in residual stresses. The results suggest an improvement in the oxidation resistance of the bond coat because of the presence of the intermediate layer.     

Influence of Plasma Spray Parameters on Formation and Morphology of ZrO2–8 wt% Y2O3 Deposits

Spray prints of thermal spray coatings were created on glass slides for air-plasma-sprayed 8-wt%-yttria-partially-stabilized zirconia (YSZ) deposits. The spray parameters such as carrier gas flow rate, standoff distance, and torch power were systematically changed to investigate the influence of these parameters on the YSZ deposit characteristics. The deposit properties such as deposition efficiency (DE), substrate coverage, deposit thickness, and roughness were measured. The deposits sprayed with a 3.5–4.0 L/min carrier gas flow rate at an 80 mm standoff distance exhibited higher values of DE within the range of studied process parameters. The DE increased as much as 25% by varying the carrier gas flow rate from 2.0 to 4.0 L/min. The deposits sprayed at a higher standoff distance and low torch power gave poor deposit characteristics. The deposit characteristics were compared with the in-flight particle parameters and revealed that the deposit characteristics strongly depended on the in-flight particle temperature. Using the in-flight particle properties, the flattening ratio and the splat thickness were calculated. The average size of particles adhering to the substrate was found to drastically change with a change of process conditions, being much less than the average size of the starting powder.     

Peptidyl Vinyl Ketone Irreversible Inhibitors of Rhodesain: Modifications of the P2 Fragment

In this paper, we report the design, synthesis and biological investigation of a series of peptidyl vinyl ketones obtained by modifying the P2 fragment of previously reported highly potent inhibitors of rhodesain, the main cysteine protease of Trypanosoma brucei rhodesiense. Investigation of the structure–activity relationship led us to identify new rhodesain inhibitors endowed with an improved selectivity profile (a selectivity index of up to 22 000 towards the target enzyme), and/or an improved antitrypanosomal activity in the sub-micromolar range.     

Microencapsulation of cashew apple (Anacardium occidentale,L.) juice using a new chitosan–commercial bovine whey protein isolate system in spray drying

The aim of this work was to obtain a new stable food product from cashew apple juice encapsulated by spray-drying technique using chitosan–whey protein isolate systems. The materials were evaluated according to their physicochemical stability during storage at different conditions and characterized with respect to their particle size distribution and structure. Encapsulated commercial and natural juices showed homogenous and unimodal particle size distribution with diameters ranging from 0.2 to 5.0 μm and from 0.2 to 40.0 μm, respectively. Both juices demonstrated higher physicochemical stability for vitamin C and color measurements than their respective non-encapsulated juices. X-ray diffractograms evidenced that the powder juices after the 140th day of storage were still in amorphous state. These results indicate that the new product was effective in protecting sensitive compounds present in the food matrix and it was also able to remain stable throughout the study period.     

Electrically conductive,melt-processed polyaniline/EVA blends

Mechanical blends of ethylene–vinyl acetate copolymer and polyaniline doped with dodecyl benzene sulfonic acid (PAni–DBSA) were prepared in a two-roll mill at 50°C and in a Haake internal mixer at 150°C. The effects of the blend composition and processing conditions on the electrical conductivity and mechanical properties were investigated. These blends exhibited high levels of electrical conductivity at a small amount of PAni complex. Blends prepared in a two-roll mill displayed conductivity values as high as 1 S/cm and a higher protonation degree than the pure PAni–DBSA, as indicated by X-ray photoelectron spectroscopy. Two different insulator–conductor transition points were observed in these blends. The mechanical performance decreased as the amount of PAni–DBSA increased, indicating blend incompatibility and a plasticizing effect of the DBSA. The morphology of the blends were studied by scanning electron microscopy. © 2001 John Wiley & Sons, Inc. J Appl Polym Sci 82: 114–123, 2001     

Crystallization kinetics of thermoplastic elastomeric blends based on ground tyre rubber

This work analyzes the crystallization process of thermoplastic elastomeric blends (TPE) based on ground tyre rubber (GTR). More specifically it analyzes the effect of GTR and fresh rubber materials, like ethylene propylene diene monomer (EPDM) and ethylene propylene rubber (EPR), on the crystallization of binary and ternary polypropylene (PP)‐based blends. The crystallization kinetics is studied under isothermal and nonisothermal conditions using differential scanning calorimetry (DSC). The kinetic parameters derived from the Avrami model are used to study the effect of temperature and rubber materials on the nucleation mechanism, the morphology of the crystalline structures, and the crystallization rate. Results reveal that GTR has a strong nucleating effect on PP and that its presence leads to higher crystallization rates. The EPDM presence has a slight effect on the PP crystallization process whereas EPR has no significant effect. From the DSC curves it is possible to detect an inverse relationship between temperature and the crystallization rate. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 42589.     

Structure and analgesic properties of layered double hydroxides intercalated with low amounts of ibuprofen

Ibuprofen‐intercalated layered double hydroxides (LDH‐IBU) have been successfully synthesized via a coprecipitation method with a nominal [Al³⁺]/[Mg²⁺] ratio of 0.5 and a variable molar IBU/([Al³⁺]+[Mg²⁺]) ratio of 0, 0.15, 0.18, 0.24, 0.36, and 0.72. After an accurate determination of the composition, the nature of the intercalated species and the effective intercalation yield from to IBU, it is shown that the synthesis route used allows a good control of the quantity of intercalated IBU within the LDH framework. This results in different samples with full or partial IBU intercalation in the interlayer space in exchange of nitrate anions. The analysis of the X‐ray diffraction basal reflections reveals that the intercalation of IBU in the framework only increases the basal distances with no alteration of the brucite‐type layers. Also, a computational study used to model the positions and shapes of the basal reflections showed that the structure of the nonfully intercalated compounds follows a random interstratification scheme. Finally, three samples ranging from slightly to fully IBU‐intercalated galleries were selected for preliminary in vivo assays. These tests showed a strong tendency that after 24 hours the low yield of IBU‐intercalated compounds are almost as efficient as the fully intercalated sample.