Surface and thermal characteristics of rubber‐modified aromatic polyamide

Polyamide/epoxysilane (coupling agent) composites were reacted with poly(dimethylsiloxane) (PDMS), a condensation product of diethoxydimethylsilane (DEDMS), by a sol–gel process. Polyamide–PDMS nanocomposites were obtained. The existence of the condensation product of DEDMS and the reaction between the epoxy group and the polyamide were confirmed with Fourier transform infrared, attenuated total reflection, and wide‐scanning X‐ray photoelectron spectroscopy. Atomic force microscopy and contact‐angle measurements showed that the surface properties of polyamide were greatly improved by the addition of PDMS. The pyrolysis temperature of polyamide with PDMS was approximately 400°C, and the pyrolysis temperature was similar to that of pure polyamide. Also, the char contents increased with the addition of PDMS. The glass‐transition temperature of polyamide with or without PDMS was approximately 140°C according to differential scanning calorimetry. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 94: 1947–1955, 2004     

Concentration of tocopherols from soybean sludge by supercritical carbon dioxide

A supercritical fluid extraction method has been applied to test the feasibility of tocopherol concentration from soybean sludge with carbon dioxide at temperatures and pressures ranging from 35 to 70°C and 200 to 400 bar, respectively. The supercritical solubility of the esterified soybean sludge was over 4–6 times greater than that of the original soybean sludge. By a simple batch-type one-stage method the tocopherols in the esterified soybean sludge could be concentrated up to 40 wt%. The overall results of the present study show that soybean sludge initially containing about 13–14 wt% tocopherols may require a countercurrent multistage column to be highly and effectively concentrated.     

Kinetic and molecular weight control for methyl methacrylate semibatch polymerization. II. Open control

The gel effect will bring a violent increase of conversion for methyl methacrylate (MMA) polymerization in a short time. It will be very dangerous for the reactor, as it causes an increase of molecular weight and broadens the molecular weight distribution. To unify the kinetics, molecular weight, and its distribution, on the basis of the mathematical models for semibatch polymerization of MMA, three controlled objectives that are the heat load distribution index, the change in molecular weight, and molecular weight distribution index are presented. Three materials (monomer, solvent, and chain transfer agent) and their flow rate and feeding mode are analyzed for the open control of kinetics, molecular weight, and its distribution. The optimum flow rate and mode are obtained. The heat load distribution index and molecular weight distribution index are even less than 2.0 and 2.2, respectively. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 100: 4399–4405, 2006     

Time Deformation,Continuous Euler Processes and Forecasting

Abstract. A continuous Euler model has time‐varying coefficients. Through a logarithmic time transformation, a continuous Euler model can be transformed to a continuous autoregressive (AR) model. By using the continuous Kalman filtering through the Laplace method, this article explores the data application of a continuous Euler process. This time deformation of an Euler process deforms specific time‐variant (non‐stationary) behaviour to time‐invariant (stationary) data on the deformed time scale. With these time‐invariant data on the transformed time scale, one may use traditional tools to conduct parameter estimation and forecasts. The obtained results can then be transformed back to the original time scale. Simulated data and actual data such as bat echolocation and the US residential investment growth are used to demonstrate the usefulness of time deformation in forecasting. The results indicate that fitting a traditional autoregressive moving‐average (ARMA) model on an Euler data set without imposing time transformation leads to forecasts that are out of phase while the forecasts of an Euler model stay mostly in phase.     

A porous mixed-valent iron MOF exhibiting the acs net: Synthesis, characterization and sorption behavior of Fe3O(F4BDC)3(H2O)3·(DMF)3.5

A new mixed-valent iron MOF, formulated as Fe₃O(F₄BDC)₃(H₂O)₃·(DMF)_3.5 (1), has been synthesized by using a perfluorinated linear dicarboxylate to link trigonal prismatic Fe₃(μ³-O)(O₂C–)₆ clusters. The structure refinement based on single crystal X-ray diffraction data collected from 1 reveals the material exhibits the acs topology with large channels along the crystallographic c-axis. Due to the presence of fluorine atoms the organic link, 2,3,5,6-tetrafluorobenzene-1,4-dicarboxylate (F₄BDC), has a 63° torsion angle between the carboxylate and aromatic planes, resulting in larger channels compared to those in the isoreticular material MOF-235. While few iron-based MOFs have demonstrated porosity, nitrogen and hydrogen sorption experiments carried out at 77 K proved the porosity of outgassed 1, which has a Langmuir surface are of 635 m²/g and a gravimetric capacity of 0.9 wt% of hydrogen at 1 bar.     

On the inhibiting effect of phenolic compounds in the photopolymerization of acrylates under high‐intensity and polychromatic UV/visible lights

The photopolymerization of wood coatings under UV and visible light in industrial type conditions has been investigated. The inhibiting effect of the phenolic compounds found in wood extractives, especially quercetin, on the final properties of the coating (hardness, gel content) as well as the polymerization kinetics (rates, final conversion) has been discussed. Model clear‐coating formulations — based on an acrylate oligomer, a reactive diluent and a bis‐acylphosphine oxide as photo‐initiator — have been used. This article focuses on the influence of the nature of the acrylate oligomer (polyester, epoxy, polyurethane), the type of phenolic derivative (POHs) and the irradiation conditions (UV conveyor, Xe lamp). It appears that lead to through the strong inner‐filter effect in the presence of quercetin is responsible for the loss of all the observed properties. In order to mimic what happens at the wood–coating interface, the role of the diffusion of the phenolic derivatives have been also investigated and discussed. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 103: 3285–3298, 2007     

Effectiveness test of alginate‐derived polymeric surfactants

A series of alginate‐derived polymeric surfactants (APSs) with a linear alkyl group (C8, C12, C16) was synthesized by oxidation followed by reductive amination of 2,3‐dialdehydic alginate. The products were characterized by measuring IR spectra, NMR spectra, surface tension and critical micelle concentration (cmc). They were also tested for the solubilization of azobenzene and adsorption of heavy metal. In the case of 40% CHO‐C8 APSs, the lowest interfacial tension value (31.5 m Nm^?1) was obtained at the cmc value of 1.35 g dm^?3. The dissolving capacity of 40% CHO‐C8 APS towards azobenzene was 27 times greater than that of alginate. The overall cobalt (Co²⁺) removal efficiency by adsorption using APSs was high compared with that of sodium alginate at pH 3, 5 and 7. Equilibrium aspects of cobalt adsorption onto 10% CHO‐APSs were studied, and the results show that APSs had high equilibrium capacities for cobalt uptake, 115.5 mgg^?1. © 2002 Society of Chemical Industry     

Syntheses and biological activities of polymers containing methacryloyl‐2‐oxy‐1,2,3‐propanetricarboxylic acid or 5‐fluorouracil

A series of novel copolymers, poly(methacryloyl‐2‐oxy‐1,2,3‐propanetricarboxylic acid‐co‐exo‐3,6‐epoxy‐1,2,3,6‐tetrahydrophthalic acid) [poly(MTCA‐co‐ETAc)], poly(methacryloyl‐2‐oxy‐1,2,3‐propanetricarboxylic acid‐co‐hydrogenethyl‐exo‐3,6‐epoxy‐1,2,3,6‐tetrahydrophthalate) [poly(MTCA‐co‐HEET)], and poly(methacryloyl‐2‐oxy‐1,2,3‐propanetricarboxylic acid‐co‐α‐ethoxy‐exo‐3,6‐epoxy‐1,2,3,6‐tetrahydrophthaloyl‐5‐fluorouracil) [poly(MTCA‐co‐EETFU)], were prepared from corresponding monomers by photopolymerizations at 25°C for 48 h. The polymers were identified by FTIR, ¹H‐NMR, and ¹³C‐NMR spectroscopies. The number‐average molecular weights of the fractionated polymers determined by GPC were in the range from 9400 to 14,900 and polydispersity indices were 1.2–1.4. The in vitro IC₅₀ values of polymers against mouse mammary carcinoma (FM3A), mouse leukemia (P388), and human histiocytic lymphoma (U937) as cancer cell lines and mouse liver cells (AC2F) as a normal cell line were much higher compared to that of 5‐fluorouracil (5‐FU). The in vivo antitumor activities of monomers and polymers against mice bearing sarcoma 180 tumor cell line were better than those of 5‐FU. The inhibition of DNA replication and antiangiogenesis activities of MTCA and copolymers were better compared to those of 5‐FU. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 94: 57–64, 2004     

Selective CO oxidation in the presence of hydrogen over supported Pt catalysts promoted with transition metals

Selective CO oxidation in the presence of excess hydrogen was studied over supported Pt catalysts promoted with various transition metal compounds such as Cr, Mn, Fe, Co, Ni, Cu, Zn, and Zr. CO chemisorption, XRD, TPR, and TPO were conducted to characterize active catalysts. Among them, Pt-Ni/γ-Al₂O₃ showed high CO conversions over wide reaction temperatures. For supported Pt-Ni catalysts, Alumina was superior to TiO₂ and ZrO₂ as a support. The catalytic activity at low temperatures increased with increasing the molar ratio of Ni/Pt. This accompanied the TPR peak shift to lower temperatures. The optimum molar ratio between Ni and Pt was determined to be 5. This Pt-Ni/γ A1₂O₃ showed no decrease in CO conversion and CO₂ selectivity for the selective CO oxidation in the presence of 2 vol% H₂O and 20 vol% CO₂. The bimetallic phase of Pt-Ni seems to give rise to stable activity with high CO₂ selectivity in selective oxidation of CO in H₂-rich stream.     

Theoretical analysis of a multiple-effect diffusion still producing highly concentrated seawater

A multiple-effect diffusion still producing highly concentrated seawater was theoretically analyzed taking variations of the boiling point elevation (BPE) into account. The still consists of a series of seawater-soaked wicks stuck on closely-spaced parallel plates with the first plate steam-heated at 100°C and the last plate cooled in 30°C ambient air. Evaporation from the wicks increases the BPE more rapidly at downstream distances closer to exits of evaporating areas, and this increase reduces evaporation flux significantly at downstream regions on the wicks. An 80% heat recovery from products of hot condensate and concentrate reduces the steam consumption by 46%. The steam consumption decreases more rapidly with an increasing number of wicks than does the production rate; thus, a lower steam consumption ratio is observed for the still having more wicks. Narrowing the gaps between the plates greatly increases the production rate with a slight decrease in the steam consumption ratio. The still with 19 wicks with 1 m by 2 m evaporating areas, 5 mm gaps and 80% heat recovery produces 12 kg distillate and 3.3 kg concentrate of 0.16 kg/kg-water concentration per 1 kg steam consumption with a 26.4 kg/h distillate production rate.