Vapour–liquid slip in a parallel-plate electrochemical fluorination reactor

A mathematical model was used to study the effect of slip between the gas and liquid phases on the performance of an electrochemical fluorination reactor. The model incorporates two-phase flow with differential material, energy and pressure balances. The effect of slip on the temperature, pressure, gas fraction and current distribution in the reactor is presented under relatively severe operating conditions. In addition, the effect of slip on the cell voltage, current efficiency and energy usage is shown at different flow rates over a wide current range. It was found that slip of the gas past the liquid is insignificant under normal operating conditions, but it is significant at high cell currents and low flow rates. Under these more severe operating conditions, slip significantly reduces the cell voltage, and hence the energy usage, since less gas resides in the reactor.     

Epoxidized linolenic acid salts as multifunctional additives for the thermal stability of plasticized PVC

Calcium and zinc salts of epoxidized linolenic acid were synthesized and used as multifunctional additives, to minimize or prevent the reaction of epoxidized soybean oil (ESO) with liberated hydrochloric acid (HCl) during the thermal degradation of poly(vinyl chloride) (PVC) in particular. These metal epoxy salts were incorporated as thermal stabilizers for both diisodecyl phthalate and ESO–plasticized PVC blends that underwent thermal degradation studies at 170°C. The overall performance of these metal epoxy salts was examined by thermal gravimetric analysis and visual color retention of the PVC blends. The weight loss profiles of the metal salt stabilized PVC were comparable to those of blends containing metal stearates. There were, however, vast improvements in color retention of the plasticized PVC using these novel additives. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 41736.     

Effect of primary alpha phase variation on mechanical behaviour of Ti–6Al–4V alloy

Small punch tests (SPTs) have been carried out at room temperature to correlate the microstructural variation of Ti–6Al–4V alloy with that of SPT parameters. Microstructural variation in terms of different volume fractions of primary alpha phase of Ti–6Al–4V alloy has been introduced as a result of solution annealing at different temperatures followed by thermal aging. Small punch test parameters, i.e. total area under the load vs displacement curve, area under the zone of elastic bending, plastic bending and plastic instability have been found to increase from the content of 10% primary alpha phase to 20% primary alpha phase and then these are decreasing from the content of 20% primary alpha phase to 30% primary alpha phase.     

The Change of X‐ray Diffraction Peak Width During in situ Conventional Sintering of Nanoscale Powders

Diffraction peaks of nanoscale particles of 3 mol% yttria‐stabilized zirconia become sharper as the powder sinters. The reduction in the peak width is correlated with the increase in density. The sharpening of the peak agrees reasonably well with the remaining free surface area as the sample sinters. Therefore, high curvature of the free surface of the pores is assumed to lead to peak broadening (the grain boundaries that grow at the expense of the free surfaces of the pores do not have this curvature). The change in the grain size during sintering does not make a significant contribution to peak width.     

Flow and temperature patterns in an inductively coupled plasma reactor: Experimental measurements and CFD simulations

Measurements of temperature patterns in an inductively coupled plasma (ICP) have been carried out experimentally. Plasma torch was operated at different RF powers in the range of 3–14 kW at near atmospheric pressure and over a wide range of sheath gas flow rate (3–25 lpm). Measurements were made at five different axial positions in ICP torch. The chordal intensities were converted into a radial intensity profile by Abel Inversion technique. Typical radial temperature profile shows an off‐axis temperature peak, which shifts toward the wall as the power increases. Temperatures in the range of 6000–14,000 K were recorded by this method. The temperature profiles in the plasma reactor were simulated using computational fluid dynamics (CFD). A good agreement was found between the CFD predictions of the flow and temperature pattern with those published in the literature as well as the temperature profiles measured in the present work. © 2014 American Institute of Chemical Engineers AIChE J, 60: 3647–3664, 2014     

Ag2O–Al2O3–ZrO2 Trimetallic Nanocatalyst for High Performance Photodegradation of Nicosulfuron Herbicide

Topics in Catalysis - In the present study, Ag2O–Al2O3–ZrO2 based trimetallic oxide nanocatalyst was designed using simple microwave assisted reduction method. It was characterized...     

Differential Physio-Biochemical and Metabolic Responses of Peanut (Arachis hypogaea L.) under Multiple Abiotic Stress Conditions

The frequency and severity of extreme climatic conditions such as drought, salinity, cold, and heat are increasing due to climate change. Moreover, in the field, plants are affected by multiple abiotic stresses simultaneously or sequentially. Thus, it is imperative to compare the effects of stress combinations on crop plants relative to individual stresses. This study investigated the differential regulation of physio-biochemical and metabolomics parameters in peanut (Arachis hypogaea L.) under individual (salt, drought, cold, and heat) and combined stress treatments using multivariate correlation analysis. The results showed that combined heat, salt, and drought stress compounds the stress effect of individual stresses. Combined stresses that included heat had the highest electrolyte leakage and lowest relative water content. Lipid peroxidation and chlorophyll contents did not significantly change under combined stresses. Biochemical parameters, such as free amino acids, polyphenol, starch, and sugars, significantly changed under combined stresses compared to individual stresses. Free amino acids increased under combined stresses that included heat; starch, sugars, and polyphenols increased under combined stresses that included drought; proline concentration increased under combined stresses that included salt. Metabolomics data that were obtained under different individual and combined stresses can be used to identify molecular phenotypes that are involved in the acclimation response of plants under changing abiotic stress conditions. Peanut metabolomics identified 160 metabolites, including amino acids, sugars, sugar alcohols, organic acids, fatty acids, sugar acids, and other organic compounds. Pathway enrichment analysis revealed that abiotic stresses significantly affected amino acid, amino sugar, and sugar metabolism. The stress treatments affected the metabolites that were associated with the tricarboxylic acid (TCA) and urea cycles and associated amino acid biosynthesis pathway intermediates. Principal component analysis (PCA), partial least squares-discriminant analysis (PLS-DA), and heatmap analysis identified potential marker metabolites (pinitol, malic acid, and xylopyranose) that were associated with abiotic stress combinations, which could be used in breeding efforts to develop peanut cultivars that are resilient to climate change. The study will also facilitate researchers to explore different stress indicators to identify resistant cultivars for future crop improvement programs.     

Exploitation of microbial antagonists for the control of postharvest diseases of fruits: a review

Fungal diseases result in significant losses of fruits and vegetables during handling, transportation and storage. At present, post-production fungal spoilage is predominantly controlled by using synthetic fungicides. Under the global climate change scenario and with the need for sustainable agriculture, biological control methods of fungal diseases, using antagonistic microorganisms, are emerging as ecofriendly alternatives to the use of fungicides. The potential of microbial antagonists, isolated from a diversity of natural habitats, for postharvest disease suppression has been investigated. Postharvest biocontrol systems involve tripartite interaction between microbial antagonists, the pathogen and the host, affected by environmental conditions. Several modes for fungistatic activities of microbial antagonists have been suggested, including competition for nutrients and space, mycoparasitism, secretion of antifungal antibiotics and volatile metabolites and induction of host resistance. Postharvest application of microbial antagonists is more successful for efficient disease control in comparison to pre-harvest application. Attempts have also been made to improve the overall efficacy of antagonists by combining them with different physical and chemical substances and methods. Globally, many microbe-based biocontrol products have been developed and registered for commercial use. The present review provides a brief overview on the use of microbial antagonists as postharvest biocontrol agents and summarises information on their isolation, mechanisms of action, application methods, efficacy enhancement, product formulation and commercialisation.     

On the Growth and Microstructure of Carbon Nanotubes Grown by Thermal Chemical Vapor Deposition

Carbon nanotubes (CNTs) were deposited on various substrates namely untreated silicon and quartz, Fe-deposited silicon and quartz, HF-treated silicon, silicon nitride-deposited silicon, copper foil, and stainless steel mesh using thermal chemical vapor deposition technique. The optimum parameters for the growth and the microstructure of the synthesized CNTs on these substrates are described. The results show that the growth of CNTs is strongly influenced by the substrate used. Vertically aligned multi-walled CNTs were found on quartz, Fe-deposited silicon and quartz, untreated silicon, and on silicon nitride-deposited silicon substrates. On the other hand, spaghetti-type growth was observed on stainless steel mesh, and no CNT growth was observed on HF-treated silicon and copper. Silicon nitride-deposited silicon substrate proved to be a promising substrate for long vertically aligned CNTs of length 110–130 μm. We present a possible growth mechanism for vertically aligned and spaghetti-type growth of CNTs based on these results.