Attenuation of ultrasonic waves in V, Nb and Ta at low temperatures

Variation of ultrasonic attenuation and velocities with temperature have been evaluated in the temperature range 5-50 K due to electron-phonon interaction mechanism in transition metals vanadium, niobium and tantalum for longitudinal and shear waves. For this evaluation, we have also computed the second order elastic constants using Morse potential. Behaviour of acoustical phonons in these bcc metals is different from other normal metals, intermetallics, semimetallics and alloys. Some characteristic features of these materials connected to ultrasonic parameters are discussed.     

Amperometric determination of tyramine in sauce and beer by epoxy resin biocomposite membrane bound tyramine oxidase

A method is described for construction of an amperometric biosensor for specific determination of tyramine, using black gram tyramine oxidase immobilized covalently on an epoxy resin membrane. The biosensor had optimum response within 10 s at pH 8.5 and 35 °C. A linear relationship was observed between tyramine concentrations and current (mA) in the range of 0.24 to 3.47 mg/dL. The biosensor was employed for determination of tyramine in beer and sauce. The detection limit of sensor was 0.24 mg/dL. The mean analytical recovery of added tyramine (0.5 and 1.0 mg/dL) was 97.3 ± 2.3 and 95.9 ± 3.4%. Within and between batch coefficient of variation were 5.1 and 5.34%, respectively. Enzyme electrode showed 35% loss in its initial activity after its regular use over a period of 2 months. The biosensor has the advantage that it does not suffer from leaching of enzyme and measures tyramine specifically.     

Isatin compounds as corrosion inhibitors for N80 steel in 15% HCl

The inhibition effect of two synthesized isatin compounds namely 1-morpholinomethyl-3-(1-N-dithiooxamide)iminoisatin [MMTOI] and 1-diphenylaminomethyl-3-(1-N-dithiooxamide)iminoisatin [PAMTOI] on the corrosion inhibition of N80 steel in 15% HCl solution was studied by polarization, EIS and weight loss measurements. It was found that both the inhibitors were effective and their inhibition efficiency was significantly increased with increasing concentration. Polarization curves revealed that the used inhibitors represent mixed-type inhibitors. Adsorption of these inhibitors led to a reduction in the double layer capacitance and an increase in the charge transfer resistance, and was found also to obey Langmuir isotherm.     

NAFLA – Ein Simulationswerkzeug zur analytischen Abschätzung von Schadstofffahnenlängen

Groundwater pollution with organic contaminants remains a world-wide problem. Before selection of any remediation technique, it is important to pre-assess contaminated sites with respect to their hazard. For this, several analytical and numerical approaches have been used and an initial assessment of contaminated sites the MS-Excel^© tool “NAFLA” was developed. “NAFLA” allows a quick and straightforward calculation and comparison of some analytical approaches for the estimation of maximum plume length under steady-state conditions. These approaches differ from each other in source geometry, model domain orientation, and in the consideration of (bio)chemical reaction within the domain. In this communication, we provide details about the development of “NAFLA”, its possible usage and information for users. The tool is especially designed for application in student education, by authorities and consultants.     

Biomolecular screening with encoded porous-silicon photonic crystals

Strategies to encode or label small particles or beads for use in high-throughput screening and bioassay applications focus on either spatially differentiated, on-chip arrays or random distributions of encoded beads. Attempts to encode large numbers of polymeric, metallic or glass beads in random arrays or in fluid suspension have used a variety of entities to provide coded elements (bits)--fluorescent molecules, molecules with specific vibrational signatures, quantum dots, or discrete metallic layers. Here we report a method for optically encoding micrometre-sized nanostructured particles of porous silicon. We generate multilayered porous films in crystalline silicon using a periodic electrochemical etch. This results in photonic crystals with well-resolved and narrow optical reflectivity features, whose wavelengths are determined by the etching parameters. Millions of possible codes can be prepared this way. Micrometre-sized particles are then produced by ultrasonic fracture, mechanical grinding or by lithographic means. A simple antibody-based bioassay using fluorescently tagged proteins demonstrates the encoding strategy in biologically relevant media.     

Synthesis and characterization of Cu nanotubes and nanothreads by electrical arc evaporation

We report the formation and characterization of copper nanostructures, nanotubules and nanothreads, which were obtained by electrical arc evaporation of Cu electrodes under varied conditions of He ambience. Electrical arc evaporation was done with approximately 10 V and (approximately 50-100 A) DC current. The current was used in a pulse mode. The evaporated material was condensed on a formvar-coated Cu grid mounted on a liquid N2-cooled specimen holder. Transmission electron microscopy was employed to characterize the condensed materials. These investigations revealed that the condensed materials consisted of the mentioned nanostructures. Nanotubes and nanothreads are formed for a He pressure in the chamber corresponding to approximately 140 and approximately 500 torr, respectively. Extensive electron microscopic investigations showed that the diameter of the nanotubes varied from approximately 5 nm to approximately 50 nm and their length from 2 microns to 3 microns.     

Asterionella blooms in the northwestern Bay of Bengal during 2004

Asterionella glacialis Castracane, a diatom species of marine phytoplankton, bloomed in the coastal waters of the northwestern Bay of Bengal during 24 March to 4 April 2004. This species dominated by 99% in cell concentration on 26 March 2004. During the bloom period, phytoplankton population density increased by three orders of magnitude, while the chlorophyll a concentration increased by 70 to 80 times relative to the pre‐bloom situation. The blooming was associated with coastal upwelling and influenced water quality. Corresponding to the blooming period, satellite sensor‐derived products of sea surface temperature (SST) and chlorophyll a data were analysed to understand the coverage and dynamics of phytoplankton in the area.     

Determination of the flow stress of five AHSS sheet materials (DP 600, DP 780, DP 780-CR,DP 780-HY and TRIP 780) using the uniaxial tensile and the biaxial Viscous Pressure Bulge (VPB) tests

Room temperature uniaxial tensile and biaxial Viscous Pressure Bulge (VPB) tests were conducted for five Advanced High Strength Steels (AHSS) sheet materials, and the resulting flow stress curves were compared. Strain ratios (R-values) were also determined in the tensile test and used to correct the biaxial flow stress curves for anisotropy. The pressure vs. dome height raw data in the VPB test was extrapolated to the burst pressure to obtain the flow stress curve until fracture. Results of this work show that the flow stress data can be obtained to higher strain values under biaxial state of stress. Moreover, it was observed that some materials behave differently if subjected to different state of stress. These two conclusions, and the fact that the state of stress in actual stamping processes is almost always biaxial, suggest that the bulge test is a more suitable test for obtaining the flow stress of AHSS sheet materials for use as an input to Finite Element (FE) simulation models.     

Combustion synthesis of compounds in the Y2O3-Al2O3 system

In the Y₂O₃-Al₂O₃ system, compounds Y₃Al₅O₁₂ (yttrium aluminum garnet, YAG), YAlO₃ (yttrium aluminum perovskite, YAP), and Y₄Al₂O₉ (yttrium aluminate monoclinic, YAM) are well known. YAG and YAP are of considerable technological importance. Conventional solid-state reaction techniques require high sintering temperatures (above 1800°C) to prepare phase-pure compounds. Though several soft chemical routes have been explored for synthesis of YAG, YAP and YAM, most of these methods are complex. Moreover, phase-pure materials are not obtained in one step and prolonged annealing at temperatures around 1000°C is necessary. In this paper, one-step combustion synthesis of these compounds is reported using a modified procedure and employing mixed (glycine + urea) fuel. Phosphors based on Ce³⁺ activation were also prepared and exhibited characteristic photoluminescence.