Anthocyanins and flavonols berries from Vitis vinifera L. cv. Brancellao separately collected from two different positions within the cluster

Galicia (N.W. Iberian Peninsula) is a Spanish region with several old-traditional winegrowing areas. Vitis vinifera L. cv. Mencía is one of the most often used to produce quality red wines in the five Galicia Denomination of Origin. However, there are traditional cultivars such as Brancellao, which were not exploited for their potential to produce quality red wines. Dynamics of anthocyanin and flavonol accumulation were studied separately in two different positions within the cluster (tips and shoulders), during 30 days before harvest. The objective of separating berries is to assess the existence of different polyphenol quality in both positions; as a consequence, the selection and harvest of those berries with a higher content of anthocyanins and flavonols could produce red wines with different qualities. Derivatives of five anthocyanins (malvidin, peonidin, petunidin, delphinidin and cyanidin) were detected in skins at both positions within the cluster. Anthocyanin contents stabilized in the 30 days prior to harvest in the berries from the shoulders whereas they continue to increase in those from the tips. Derivatives of six flavonols (quercetin, myricetin, kaempherol, laricitrin, isorhamnetin and syringetin) were detected in skin and flesh at both positions within the cluster. Dynamics of anthocyanins (from 400 to 515 mg/kg in tips; and from 598 to 574 mg/kg in shoulders) and flavonols (from 19 to 29.3 mg/kg in tips; and from 22.7 to 29.4 mg/kg in shoulders) over ripening confirmed that these polyphenols presented upward trends. Therefore, it is not necessary to harvest Brancellao berries separately and a high quality red wine will be obtained with berries from entire clusters regarding these compounds.     

Engineering model of a passive planar air breathing fuel cell cathode

The behavior of an air breathing fuel cell (ABFC) operated on dry-hydrogen in dead-ended mode is studied using theoretical analysis. A one-dimensional, non-isothermal, combined heat and mass transport model is developed that captures the coupling between water generation, oxygen consumption, self-heating and natural convection at the air breathing cathode. The model is validated against planar ABFC experimental measurements over a range of ambient temperatures. The model confirms the strong effect of self-heating on the water balance within passive ABFCs. Model analysis provides several conclusions: (1) thermal runaway caused by inadequate heat rejection predominantly limits ABFC performance. (2) The natural convection boundary layer represents a significant barrier to cathode mass and heat transfer. (3) Because the mass and heat transport numbers associated with natural convection are small, even slight forced convection dramatically affects cell behavior. (4) Performance optimization requires maximizing heat rejection while minimizing flooding. Decoupling the latter two phenomena is challenging due to the exponential relationship between water vapor saturation and temperature.     

Current distribution in polymer electrolyte membrane fuel cell with active water management

Air delivery is typically the greatest parasitic power loss in polymer electrolyte membrane fuel cell (PEMFC) systems. We here present a detailed study of an active water management system for PEMFCs, which uses a hydrophilic, porous cathode flow field, and an electroosmotic (EO) pump for water removal. This active pumping of liquid water allows for stable operation with relatively low air flow rates and low air pressure and parallel cathode channel architectures. We characterize in-plane transport issues and power distributions using a three by three segmented PEMFC design. Our transient and steady state data provide insight into the dynamics and spatial distribution of flooding and flood-recovery processes. Segment-specific polarization curves reveal that the combination of a wick and an EO pump can effect a steady state, uniform current distribution for a parallel channel cathode flow field, even at low air stoichiometries (α_air = 1.5). The segmented cell measurements also reveal the mechanisms and dynamics associated with EO pump based recovery from catastrophic flooding. For most operating regimes, the EO pump requires less than 1% of the fuel cell power to recover from near-catastrophic flooding, prevent flooding, and extend the current density operation range.     

Improved quality and shelf life of farmed trout (Oncorhynchus mykiss) by whole processing in a combined ozonised flow ice refrigeration system

A combined refrigeration system consisting of ozone and flow ice was evaluated for the sacrifice, cooling and chilled storage of continental trout. The batch processed in ozonised flow ice exhibited significant ( P  < 0.05) reductions (0.97 and 1.51 log CFU cm⁻²) in skin aerobes and psychrotrophs on days 6 and 9, respectively, and significant ( P  < 0.05) reductions (0.94 log CFU g⁻¹ and 0.96 log CFU g⁻¹) in aerobes, and proteolytic bacteria in muscle on day 13. A significant ( P  < 0.05) inhibition of TMA-N formation after 9 days was also observed, with an average reduction of 28.4% along the storage period, Slight reductions in autolytic breakdown mechanisms were also observed in the ozonised batch, a maximum reduction of 14.82% being reached on day 13. The microbial and biochemical changes were well correlated with the sensory evaluation, which revealed relevant differences between the batches on day 13 and a shelf life extension of the ozonised batch up to day 16.     

The effect of glaze uptake on storage quality of frozen shrimp

Ice-glazing is applied to protect the frozen shrimp from undesirable quality changes during frozen storage. Effects of initial frozen shrimp temperature on glaze uptake; glazing time on glaze uptake; and different glaze percentage on physical and chemical changes of frozen shrimp during storage were investigated. Shrimps were frozen in a spiral freezing machine (?35 °C/15 min); transferred to the air blast freezer until the core temperature reached ?18 °C, ?25 °C and ?30 °C; submitted to glazing process; and stored at ?18 °C for 180 days. The glazing percentage, pH and N-TVB levels were monitored every 45 days. This study has demonstrated the effectiveness of the glazing process as a protecting agent for frozen shrimp. A reasonable range of water uptake could be between 15% and 20% to guarantee the final quality. Therefore, it is important to prevent temperature fluctuations during transportation and storage to maintain the quality of the frozen shrimps.     

Proton nuclear magnetic resonance rapid and structure-specific determination ofω-3 polyunsaturated fatty acids in fish lipids

Based on proton nuclear magnetic resonance (¹H-NMR) spectroscopy, a rapid and structure-specific method for the determination of ω-3 polyunsaturated fatty acids (PUFAs) in fish lipids is presented. The different chemical shift observed for the methyl resonance of ω-3 PUFAs (δ=0.95 ppm) with respect to the methyl resonance of all other fatty acids (δ=0.86 ppm) has provided the possibility of proposing a new and rapid method for the determination of ω-3 PUFA content. Twenty-four fish lipid samples (raw, cooked and canned albacore tuna) produced results that showed good agreement between¹H-NMR analysis and gas chromatographic determination. Raw and cooked samples showed significantly higher levels of ω-3 PUFA than canned tuna.     

Optimisation of rancidity stability in long‐chain PUFA concentrates obtained from a rainbow trout (Oncorhynchus mykiss) by‐product

This research was focused on the production of polyunsaturated fatty acid concentrates from a farmed rainbow trout (Oncorhynchus mykiss) by‐product (i.e. belly muscle). The effect of different process variables (urea/fatty acids (FA) contents ratio, crystallisation time and temperature and stirring speed of the urea/FA mixture) on the lipid oxidation development during the urea complexation process was investigated. For this purpose, an experimental design (26 runs) following the response‐surface methodology was developed. As a result, peroxide value and TOTOX index showed to be dependent on the crystallisation time and temperature and the urea/FA ratio, while no influence of the crystallisation stirring speed was detected on both indices; additionally, polyene index was affected by the urea/FA ratio and its interaction with the crystallisation time. An optimised desirability score near 1.0 was attained provided values of 2.8 °C, 3.05 h and 3.57 were applied for crystallisation temperature, crystallisation time and urea/FA ratio, respectively.     

Continuous-Flow UV Liquid Food Pasteurization: Engineering Aspects

Ultraviolet (UV)-C treatments are a promising technology for liquid food pasteurization as an alternative to heat treatments. However, the design of efficient UV reactors to reduce pertinent microorganisms and comply with current food safety goals is still an engineering challenge due to the low penetration depth of UV light in liquid foods with high UV absorbance and suspended particles, and the variations in the residence time of the product in the UV reactors. This review focuses on physical aspects of UV radiation related to the essential product and processing parameters for the design of UV reactors. The UV equipment available for liquid food processing is described and the main drawbacks and advantages are discussed.     

Orthostatic postural tachycardia: study of 8 patients

Foreign body aspiration (FBA) is a leading cause of accidental death in children less than one year old and is the cause of death in 7% of children less than four. Food items, especially peanuts, are the most common items aspirated in infants and toddlers, whereas older children are more likely to aspirate non-food items such as pen caps, pins, and paper clips. A high degree of suspicion is required to diagnose FBA. A history of a witnessed choking episode is most important in early diagnosis. An asymptomatic period is common after aspiration and contributes to a delay in diagnosis of greater than one week in 12% to 26% of patients. This delay in diagnosis causes increased morbidity from bronchial inflammation, obstruction, and pneumonia which is resistant to treatment. Prompt endoscopic removal of the foreign body with an open rigid bronchoscope under general anesthesia is the mainstay of therapy.     

Barriers and drivers for non-shoppers in B2C e-commerce: A latent class exploratory analysis

The barriers and drivers of e-shopping, as well as segmentation and behavior of e-shoppers, have been long studied in the last two decades, but the behavior of non-shoppers in business-to-consumer (B2C) e-commerce is still an open field for research which has seldom been dealt with. Our exploratory study has as its main objective the classification of non-shoppers in B2C e-commerce based on the barriers which keep deterring them from purchasing on the Internet and the drivers which might lead them to engage in e-shopping. In order to achieve this goal, data was gathered from 1499 Spanish respondents from a nationwide household panel survey. The responses were analyzed using a latent class analysis (LCA) approach and the results show four different types of non-shoppers based on the barriers for online shopping, while six different groups were identified based on the drivers to start shopping on the Internet. Implications for research and practice from the findings of the study are discussed in the final section.