Fatigue characteristics of pulsed MIG-welded Al-Zn-Mg alloy

Pulse-current MIG welding of Al-Zn-Mg alloy was carried out using an extruded section of base material and Al-Mg (5183) filler wire. During welding the pulse parameters such as the mean current and pulse frequency were varied and their effect on the geometry and porosity content of weld deposit as well as the fatigue life of the weldment was studied. The pulse parameters were found to affect significantly the geometry and porosity content of weld deposit and consequently the fatigue life of the weldment. For a comparative study, weldments were also prepared by using conventional continuous current MIG-welding process, where welding currents equivalent to the mean currents of pulsed process were used. The fatigue life of the weldment was correlated with the geometry and porosity content of weld deposit.     

Structure of nitric oxide synthase oxygenase dimer with pterin and substrate

Crystal structures of the murine cytokine-inducible nitric oxide synthase oxygenase dimer with active-center water molecules, the substrate L-arginine (L-Arg), or product analog thiocitrulline reveal how dimerization, cofactor tetrahydrobiopterin, and L-Arg binding complete the catalytic center for synthesis of the essential biological signal and cytotoxin nitric oxide. Pterin binding refolds the central interface region, recruits new structural elements, creates a 30 angstrom deep active-center channel, and causes a 35 degrees helical tilt to expose a heme edge and the adjacent residue tryptophan-366 for likely reductase domain interactions and caveolin inhibition. Heme propionate interactions with pterin and L-Arg suggest that pterin has electronic influences on heme-bound oxygen. L-Arginine binds to glutamic acid-371 and stacks with heme in an otherwise hydrophobic pocket to aid activation of heme-bound oxygen by direct proton donation and thereby differentiate the two chemical steps of nitric oxide synthesis.     

Dicaf: a distributed architecture for intelligent transportation

The solution to increasing traffic congestion is not to simply build new roads. Instead, researchers hope to use technology to make more efficient use of the highway network that already exists. Key efforts to date have fallen into two categories. One set of studies has looked at the use of a centralized traffic management center that collects traffic congestion information at a single point and relays it to on-board computers in vehicles or directly to the drivers. Another set of studies has looked at systems that would prescribe the routes for vehicles. The authors describe their Dicaf (distributed scalable architecture for IVHS using a continuous-function congestion measure) system, which envisions a network of distributed, independent traffic management centers that provide congestion and other information to on-board navigation systems in the automobiles themselves. The navigation system uses that information to help drivers avoid slower traffic and thus find the fastest route home or anywhere     

DARYN-a distributed decision-making algorithm for railway networks:modeling and simulation

The state of the art in scheduling “point-to-point” trains in a railway network utilizes the principles of centralized decision-making. The major difficulty of this approach is that the execution time and the memory requirements increase nonlinearly as the system grows in size. The present paper introduces a new approach, “DARYN”, wherein the overall decision process is analyzed and distributed onto every natural entity of the system. In DARYN, the decision process for every train is executed by an on-board processor that negotiates, dynamically and progressively, for temporary ownership of the tracks with the respective station controlling the tracks, through explicit processor to processor communication primitives. This processor then computes its own route utilizing the results of its negotiation, its knowledge of the track layout of the entire system, and its evaluation of the cost function. Every station's decision process is also executed by a dedicated processor that, in addition, maintains absolute control over a given set of tracks and participates in the negotiation with the trains. Presently, DARYN utilizes a simple cost function. However, if one chooses to increase the complexity of the cost function, DARYN's advantage over the traditional approach increases due to its enormous available computational power. Given that the current microprocessors such as MC68030, MC88000, Intel 486, and Intel 860 are powerful yet relatively inexpensive, a network of concurrently executing processors may offer superior price-performance quotient over a single high performance computer     

An atomic model of the outer layer of the bluetongue virus core derived from X-ray crystallography and electron cryomicroscopy

BACKGROUND: Bluetongue virus (BTV), which belongs to the Reoviridae family and orbivirus genus, is a non-enveloped, icosahedral, double-stranded RNA virus. Several protein layers enclose its genome; upon cell entry the outer layer is stripped away leaving a core, the surface of which is composed of VP7. The structure of the trimeric VP7 molecule has previously been determined using X-ray crystallography. The articulated VP7 subunit consists of two domains, one which is largely alpha-helical and the other, smaller domain, is a beta barrel with jelly-roll topology. The relative orientations of these two domains vary in different crystal forms. The structure of VP7 and the organizations of 780 subunits of this molecule in the core of virus is central to the assembly and function of BTV. RESULTS: A 23 A resolution map of the core, determined using electron cryomicroscopy (cryoEM) data, reveals that the 260 trimers of VP7 are organized on a rather precise T = 13 laevo icosahedral lattice, in accordance with the theory of quasi-equivalence. The VP7 layer occupies a shell that is between 260 A and 345 A from the centre of the core. Below this radius (230-260 A) lies the T = 1 layer of 120 molecules of VP3. By fitting the X-ray structure of an individual VP7 trimer onto the cryoEM BTV core structure, we have generated an atomic model of the VP7 layer of BTV. This demonstrates that one of the molecular structures seen in crystals of the isolated VP7 corresponds to the in vivo conformation of the molecule in the core. CONCLUSIONS: The beta-barrel domains of VP7 are external to the core and interact with protein in the outer layer of the mature virion. The lower, alpha-helical domains of VP7 interact with VP3 molecules which form the inner layer of the BTV core. Adjacent VP7 trimer-trimer interactions in the T = 13 layer are mediated principally through well-defined regions in the broader lower domains, to form a structure that conforms well with that expected from the theory of quasi-equivalence with no significant conformational changes within the individual trimers. The VP3 layer determines the particle size and forms a rather smooth surface upon which the two-dimensional lattice of VP7 trimers is laid down.     

Effects of temperature and blank holding force on biaxial forming behavior of aluminum sheet alloys

Biaxial forming behavior is investigated for three aluminum sheet alloys (Al 5182 containing 1% Mn (5182+Mn), Al 5754, and 6111-T4) using a heated die and punch in the warm forming temperature range of 200–350 °C. It is found that, while all three alloys exhibit significant improvement in their formability compared with that at room temperature, the non-heat-treatable alloys 5182 + Mn and 5754 give higher part depths than that of heat-treatable 6111-T4. The formability generally increases with decreasing BHP (BHP), but increasing the forming temperature and/or BHP minimizes the wrinkling tendency and improves the forming performance. The stretchability of the sheet alloys increase with increasing temperature and increasing BHP. For the alloys and forming conditions involved in the current study, the formability, measured in terms of part depth, comes mainly from the drawing of metal into the die cavity, although stretching effects do influence the overall forming behavior. The optimum formability is achieved by setting the die temperature 50 °C higher than the punch temperature to enhance the drawing component. Setting the die temperature higher than the punch temperature also improves the strain distribution in a part in such a manner that postpones necking and fracture by altering the location of greatest thinning.     

The effect of temperature and moisture on the rheology of black coal-oil suspensions

Rheological properties of black coal-KC220 oil suspensions have been investigated using a Contraves rheometer over a temperature and coal volume fraction range of 18–200°C and 0.247-0.385, respectively. The suspensions behaved as Newtonian fluids. Variation of viscosity with temperature does not follow any regular trend and peak viscosity values occur in the temperature range of 80–140°C for dry coal and 70–130°C for moist coal, depending upon the concentrations of coal in the suspension. Freshly prepared suspensions of moist coal exhibit viscosity peaks at a temperature lower than that of the corresponding suspension with dry coal. However, when aged, the suspensions of moist coal exhibit very small peak viscosity and follow an Arrhenius type behavior. For both dry and moist coal, the maximum volume fraction, ?_m, continues to decrease with an increase in temperature.     

FRP composites based on different types of glass fibers and matrix resins: A comparative study

Flexural properties, impact energy, heat deflection temperature, and resistance to thermal and hydrothermal degradation of composites based on E-glass and N-glass fibers as the reinforcing agents, and epoxy, unsaturated polyester, phenolic, and epoxy-phenolic resin systems as the matrix materials were studied and compared. As a reinforcing agent E-glass fiber is superior to N-glass fiber, particularly with respect to development of flexural strength and modulus, impact strength, and thermal resistance; N-glass fiber, however, imparts to the composites substantially higher resistance to hydrothermal degradation under boiling conditions in different chemical environments. For use of both E-glass and N-glass fibers as reinforcing agents, the general order of resistance to hydrothermal degradation for the composites based on different matrix resins is epoxy > phenolic > unsaturated polyester resin. Incorporation of a low dose of a rubbery polymer, such as styrene butadiene rubber (0.1–0.2%) and liquid polybutadiene (0.5–0.75%), in unsaturated polyester resin as the matrix resin measurably enhances impact energy of the composite. © 1995 John Wiley & Sons, Inc.