Photovoltaics literature survey (No. 108)

In order to help keep readers up to date in the field, each issue of Progress in Photovoltaics will contain a list of recently published journal articles most relevant to its aims and scope. This list is drawn from an extremely wide range of journals, including IEEE Transactions on Electron Devices, Journal of Applied Physics, Applied Physics Letters, Progress in Photovoltaics and Solar Energy Materials and Solar Cells. To assist the reader, the list is separated into broad categories, but please note that these classifications are by no means strict. Also note that inclusion in the list is not an endorsement of a paper's quality. If you have any suggestions, please email Santosh Shrestha at s.shrestha@unsw.edu.au .     

Energy and exergy analyses of fabricated solar drying system with smooth and rough surfaces at different conditions: A case study

For this experimental work, the solar dryer system has been fabricated. Various experiments have been performed to evaluate the performance of the fabricated dryer system. Energy and exergy concepts have been used for the assessment. And comparative analyses have also been done with smooth and rough surfaces: Grade 150 and Grade 300. This experimental work has been concluded as the maximum collector (i.e., 74°C) and cabinet temperatures (i.e., 66°C) are attained at 13:00 p.m. with Grade 300 surface. Maximum moisture loss (i.e., 35 g) and percentage moisture loss (i.e., 7.53%) are recorded at 13:00 p.m. again with a rough surface. Minimum exergy destruction rate (i.e., 0.294 W) but minimum exergy efficiency (i.e., 20.82%) are found at 17:00 p.m. with a black painted surface, which is not an acceptable condition. Maximum energy efficiency (i.e., 35.98%) and heat removal factor (i.e., 0.56) are obtained at 13:00 p.m. with a rough surface. The best performance from the fabricated solar system is received between 12:00 and 14:00 p.m. This study recommends rough surfaces and 12:00–13:00 p.m. timings for the solar drying system as the performance of the system is better in terms of energy–exergy.     

Lattice Boltzmann method for population balance equations with simultaneous growth,nucleation, aggregation and breakage

Lattice Boltzmann method (LBM) is developed for solution of one-dimensional population balance equations (PBEs) with simultaneous growth, nucleation, aggregation and breakage. Aggregation and breakage, which act as source terms in PBEs, are included as force terms in LBM formulation. The force terms representing aggregation and breakage are evaluated by fixed pivot (FP) method. Multiscale analysis is used to derive the kinetic equations associated with LBM, whose long-time large-scale solution provides the solution of the PBE. A coordinate transformation is proposed, which allows the use of non-uniform grid for LBM to obtain accurate solution of PBE with moderate number of grid points. The performance of the proposed LBM-FP method is compared with finite volume (FV) and method of characteristics (MOC) combined with FP (MOC-FP) methods. Using benchmark examples, the proposed LBM-FP method is shown to be useful for solving PBEs due to its computational efficiency and ability to handle a wide range of problems.     

A fault‐tolerant modular multilevel inverter topology

Multilevel inverter topologies have received an increasing importance for their modular structures with better integration of renewable energy sources and reduced filtering requirements. But reliability is compromised in the process of decreasing the number of switches to produce the maximum number of voltage levels. This paper elevates a single‐phase fault‐tolerant inverter topology, which is modular in structure. The proposed inverter is analyzed for open‐ or short‐circuit faults in sources and open‐circuit faults in switches. Sine Pulse Width Modulation with multicarriers technique is used to control the circuit. The carrier signals are reconfigured under fault conditions based on levels to be generated by bypassing the faulted switch or source. The circuit is simulated in MATLAB/SIMULINK, and experimental setup is developed to claim the fault tolerance of proposed inverter.     

A conceptual model of people's approach to sanitation

Sanitation is a term primarily used to characterize the safe and sound handling (and disposal) of human excreta - or simply, people's approach to take-care of their (unavoidable) primal urge. According to the recent Human Development Report 2006 Global access to proper sanitation stands at approximately 58% with 37% being a conservative estimate both for South Asia and Sub-Saharan Africa. Various multi-million dollar sanitation programmes the world over have had little success, often due to inadequate understanding of people's sanitation approach. Sanitation approach includes the perception, feel and practices involved in satisficing the primal need to defecate and urinate (and their disposal). This paper presents a structure to understand the nature of psycho-socio-economic influences that determine societal approach to sanitation. Societies across the globe have evolved imbibing diverse influences attributed to the local environment, religion, cultural practices, war, etc. While a civilization's living environment reflects these influences in their built-environment characteristics, the influences are often deep-rooted and can be traced to the way the community members satisfice their need to defecate and urinate (sanitation approach). The objective of this paper is to trace the various approaches that diverse societies/civilizations, over time, across the world have had towards sanitation, and present a structure to articulate and understand determining factors. Sanitation also involves other domestic (solid and liquid) waste disposal but in the context of this paper the scope of sanitation has been restricted to human excreta alone. The structure presented and discussed in this paper would be useful in understanding a community better in terms of providing appropriate sanitation. It is hoped that this structure be considered as a basis for further refinement and detailed research into each of the factors determining people's sanitation approach.     

Multi-walled carbon nanotubes/TiO2 composite nanofiber by electrospinning

TiO₂/carbon nanotubes (CNTs) composite nanofibers were prepared by sol-gel processing followed by electrospinning technique. Phase pure titania/CNT nanofiber of 100–150 nm diameters were obtained by high temperature calcinations of the inorganic organic composite fibers. The inclusion of nanotubes with TiO₂ was confirmed by FT-IR and Raman spectra and corresponding morphology and crystallinity were observed by SEM, TEM, and XRD analysis.     

Effect of Co loading on the hydrogen storage characteristics of hollow glass microspheres (HGMs)

The use of hydrogen as a fuel either direct combustion in an IC engine or for power generation in fuel cells continues to be a topic of significant interest. Developing and popularizing fuel cells for vehicular or other stationary applications depends upon the availability of safe and reliable hydrogen storage method. The greatest challenge as of now in this regard is the production of a light weight, nontoxic and easily transportable material which can store hydrogen. World-wide research is being conducted on developing newer materials for hydrogen storage. Hollow glass microspheres (HGMs) can be considered to be a potential hydrogen carrier which can store and deliver hydrogen for energy release applications. In this paper, we are reporting the preparation and characterization of cobalt loaded HGMs from amber glass powder for hydrogen storage applications. The feed glass powder with different percentage of cobalt loading was prepared by soaking and drying the feed glass powder in required amount of cobalt nitrate hexahydrate solution. Further, the dried feed glass powder was flame spheroidised to get cobalt loaded HGMs. Characterizations of all the HGMs samples were done using SEM, FTIR and XRD techniques. Hydrogen adsorptions on all the samples were done for 10 bar pressure at room temperature and 200 °C for 5 h. The results showed that the hydrogen adsorption capacity on these samples increased with increase in cobalt wt% from 0.2 to 2.0%. The hydrogen storage capacity of HACo2 was found to 2.32 wt% for 10 bar pressure at 200 °C.     

Factors affecting the levels of catechins and caffeine in tea beverage: estimated daily intakes and antioxidant activity

Increased public awareness of health benefits of green tea is generally based on the high polyphenol content of tea leaves and the resulting beverage. A number of factors, such as species, season, agronomic condition and age of the leaves, are known to affect the composition of commercial teas. In the present study the effects of factors associated with domestic preparation and analytical methods, such as brewing time, concentration, solvent and type of tea product, on levels of catechins and caffeine, antioxidant activity and estimated daily intakes were investigated. There were large variations in the levels of total catechins: 43 and 117 mg g^?1 dry matter (DM) (brewed for 30 s and 5 min respectively); 72 and 161 mg g^?1 DM (extracted in boiling water and 50% acetonitrile respectively); 72 and 117 mg g^?1 DM (a tea bag and tea leaves respectively). The effects on caffeine content were comparatively smaller. These variations consequently led to considerable variations in estimated daily intakes based on three cups (600 ml), ranging between 538 and 2014 mg g^?1 DM of total catechins and between 103 and 466 mg g^?1 DM of caffeine. The antioxidant activity was highest (26 680 µmol g^?1 DM) for tea leaves brewed for 5 min and lowest (10 110 µmol g^?1 DM) for a tea bag product brewed for 1 min. Copyright © 2005 Society of Chemical Industry     

Pressure-Thermal Kinetics of Furan Formation in Selected Fruit and Vegetable Juices

Furan, a potential carcinogenic compound, can be formed in array of processed foods. The objective of this study was to conduct kinetic studies in pineapple juice and assess the interactive effects of pressure (0.1 to 600 MPa) and temperature (30 to 120 °C) on furan formation. Additional experiments were carried out in tomato, watermelon, cantaloupe, kale, and carrot juice to understand the influence of matrix and juice pH. Furan was monitored in raw (control) and processed samples by automated headspace gas chromatography mass spectrometry, and quantified by calibration curve method with d₄-furan as internal standard. The data were modeled using zero-, first-, and second-order equations. The zero-order rate constants (k _T,P ), activation energy (E _a ), and Gibbs free energy of activation (ΔG ^?) of furan formation in thermally processed (TP; 90–120 °C) pineapple juice were found to be 0.036–0.55 μg/kg/min, 98–114 kJ/mol, and 173.9–180.5 kJ/mol, respectively. Furan concentration was negligible and close to the detection limit (0.37 μg/kg) after pressure treatment (600 MPa at 30 °C) of juice samples. For similar process temperatures, the rate constants of pressure-assisted thermally processed (PATP; 600 MPa at 105 °C) pineapple juice were lower than that of TP samples. Furan formation was influenced by juice matrix and pH. On the other hand, PATP markedly suppressed furan (0.7 to 1.6 μg/kg) in these selected juices. In conclusion, furan formation increased with process temperature and treatment time, while pressure treatment at ambient temperature did not promote its production. Furan formation in TP fruit juices was also influenced by juice matrix and pH, but these were not the significant factors for PATP-treated juices.