Early soot formation stages in low-pressure diffusional counterflow hydrocarbon flames

Early soot formation stages were investigated in low-pressure counterflow hydrocarbon flames. A mechanism is proposed for the formation of aggregates and discrete spherical soot particles. It is proposed that the formation of the physical surface is preceded by the emergence of a skeleton structure consisting of carbon molecule chains as a result of their polarizing and dipole interaction with the charged soot nuclei.Kiev. Translated from Fizika Goreniya i Vzryva, Vol. 29, No. 3, pp. 97–100, May–June, 1993.     

On the thermal stability of xanthan gum

The thermal stability of xanthan gum in dilute aqueous solutions at 90°C is considered. The relative viscosity as a function of ageing time is discussed, and it has been found to depend on the polymer concentration and conformation as well as on the salt content. The effectiveness of a quencher demonstrates the existence of a free-radical process in the degradation. During ageing, the molecular weight first decreases by rapid random hydrolysis of the main chain and loss of the pyruvate and acetate substituents. Later, oligomers are formed corresponding to a breakdown of both the side chain and the main chain. The identification of cellodextrins in the oligomer pool demonstrates the second effect.     

Influence of catalyst type on the curing process and network structure of alkyd coatings

Recent studies have shown that cobalt catalysts, used for curing of alkyd coatings, are potentially carcinogenic, and hence replacement by new environmental friendly catalysts is needed. The influence of different metal based catalysts on the oxidation process has been studied extensively in model systems, consisting of unsaturated oils. However, these results may not be representative for real coatings, since in these systems the oxygen diffusion is much lower than in model systems and therefore may have a large effect on the curing. In this paper, we will show how the curing of an alkyd coating depends on the type of catalyst (cobalt or manganese based). The curing process is studied using a high spatial resolution nuclear magnetic resonance (NMR) setup. The final network structure and cross-link density are found to be correlated with the catalyst used, i.e. a cobalt based catalyst and two manganese based catalysts. The difference in final network structure is investigated by NMR T₂ relaxation analysis and the glass transition temperature T_g measured using a differential scanning calorimeter (DSC). In case of the cobalt based catalyst a cross-linking front was observed and a high cross-link density was found, compared to the manganese based catalysts, in which case no sharp cross-linking front was observed. To interpret the observed NMR profiles in more detail, simulations based on a reaction-diffusion model were performed. From the results of these simulations estimates were obtained for the reaction constants and the diffusion of oxygen for the different catalysts.     

Iron species incorporated over different silica supports for the heterogeneous photo-Fenton oxidation of phenol

Iron-containing catalysts have been prepared following different synthesis routes and silica supports (amorphous, zeolitic and mesostructured materials). Activity and stability of these materials were assessed on the photo-Fenton degradation of phenolic aqueous solutions using near UV irradiation (higher than 313 nm) at room temperature and initial neutral pH. Their catalytic performance was monitored in terms of phenol and total organic carbon (TOC) conversions. Aromatic compounds and carboxylic acids as by-products coming from incomplete mineralization of phenol as well as the efficiency of each catalytic system in the use of the oxidant were also studied. Stability of the materials throughout the photo-Fenton reaction was evaluated in terms of metal leachibility. Activity and stability depend on the environment of iron species and features of silica support. The evolution of pH with the reaction time and their relationship with TOC degradation and leaching degree has been discussed. A nanocomposite material of crystalline iron oxides supported over mesostructured SBA-15 material is shown the most successful catalyst for degradation of phenolic aqueous solutions by photo-Fenton processes, achieving an outstanding overall catalytic performance accompanied with a noteworthy stability.     

Mechanosynthesis of complex oxides and preparation of mixed conducting nanocomposites for catalytic membrane reactors

Nanopowders of LaGaO₃- and LaMnO₃-based complex perovskites (P) and ceria-based fluorites (F) were prepared by mechanosynthesis. Compatible nanocomposites F + P and P + P with mixed ion and electron conducting (MIEC) properties were prepared and sintered at moderate temperatures up to dense ceramics. The obtained materials were studied by means of XRD, SEM, TEM, electrical conductivity measurements, temperature programmed (TP) reduction/oxidation and preliminary estimations of permeability were obtained. A new strategy based on the advantages of the mechanochemical ceramic approach is proposed to design multilayer ceramic membranes for CMR. Casting technology and one-step sintering were used for the production of thin film membranes with MIEC properties on porous substrates. The coarse fraction of as-milled powders from agglomerates with density 70% was used for the porous substrate, and fine fractions of aggregates with sizes <1 μm were used in preparation of composites for thin dense films. Ceria-based composites prepared by the Pechini route and/or mechanochemical method are proposed as materials for protecting thin films.     

Terpolymers. II. Mechanical properties and transition temperatures of terpolymers of vinyl stearate,vinyl acetate,and vinyl chloride

Vinyl stearate was studied as a major internal plasticizer in terpolymers containing vinyl acetate and vinyl chloride. The terpolymers were prepared by systematically replacing vinyl acetate by close increments of vinyl stearate starting with combinations of vinyl acetate and vinyl chloride, in increments, over all compositions. For comparison of properties, a complete range of copolymers of vinyl stearate and vinyl chloride, as well as mixtures of poly(vinyl chloride) and di-2-ethylhexyl phthalate (DOP) were also made. The external plasticizer was more efficient in reducing the glass temperature than was vinyl stearate. The decline in T_g with weight fraction of plasticizer was linear for the copolymers and terpolymers but concave downward with the liquid diluent. The linear decline was shown to involve mere additivity of the free volume contributed by each side-chain methylene (or methyl) group in both vinyl esters to reducing T_g. The mechanism of the diluent system was more complex. However, the magnitude of the reduction of tensile modulus at a given weight fraction of DOP could be equaled or exceeded by the same amount of vinyl stearate, by increasing the vinyl acetate content of the base copolymer to 40 mole-% or more. Unfortunately, the ultimate strengths and elongations of internally plasticized systems were reduced more than those of the mixtures at comparable compositions. Vinyl stearate was found to markedly retard photolytic degradation compared to both vinyl acetate and the external plasticizer in unstabilized samples having nearly the same thermal treatment. The effect was greater than could be ascribed to dilution by the long alkyl group. The production of a stearoyl radical more stable than the radicals initiating dehydrochlorination is suggested as a possible mechanism.     

Mechanical properties and transition temperatures of copolymers of N-n-alkylacrylamides and vinylidene chloride

Mechanical and solution properties, melting transitions, torsional stiffness temperatures, T_f, and selected modulus-temperature curves are presented for copolymers of the N-n-alkylacrylamides with vinylidene chloride. Copolymers were prepared at 60°C across the range of compositions, using as comonomers N-n-butyl-, octyl-, dodecyl- and oleyl-acrylamide, which have amorphous side-chains, and N-n-octadecyl acrylamide and n-octadecyl acrylate whose side-chains are crystalline. The mechanical properties reflected the effect of the decline in backbone crystallinity and the simultaneous development of strong intermolecular interactions in the amorphous stage. Copolymers were stiff or showed brittle failure across the compositional range except when intermolecular forces were reduced (with n-octadrcyl acrylate) and side-chain crystallization eliminated (with N-oleylacrylamide). These systems and the n-dodecylacrylamide copolymers had yield strengths less than brittle strengths and substantial elongations. Backbone crystallinity was eliminated at about 15 mole % amide and side-chain crystallinity vanished at less than 10 mole % of the amide in the N-n-octadecylacrylamide series. No depression in side-chain melting point occurred with dilution by segments of vinylidene chloride. Over-all decline in the flex-temperature was the normal monotonic function of composition except that values increased in magnitude at high vinylidene chloride contents, the effect presumably being caused by the presence of crystallinity. An empirical equation was developed which permitted the calculation of T_f for any N-n-alkylacrylamide composition with any number of carbon atoms in the side-chain, above 3.     

Technique for Measuring Grain Boundary Mobility and Its Application to Potassium Chloride

A simple technique for investigating boundary mobility is outlined and applied to the study of boundary migration in melt-grown bicrystals of KCl containing pure twist boundaries. An unexpectedly high activation energy, 4 to 6 ev, is found for movement of the twist boundaries.     

Low-Temperature Equilibria Among ZrO2, Tho2, and UO2

Studies made on low-hafnium-content ZrO₂, show that the monoclinic-tetragonal inversion temperature is 1170°C., and it is raised to approximately 1190°C. in the "natural" ZrO², which contains approximately 2% HfO₂. No explanation could be found for the knownmarked hysteresis during cooling, when the reverse polymorphic transformation takes dace at 1040°C. In the system ZrO₂-ThO₂ the monoclinic-tetragonal ZrO₂, inversion temperature is lowered to 1000°C., although the maximum solid solution extent of ZrO₂, in Thon and vice versa is approximately only 2% at this temperature. Below about 400°C. under hydrothermal conditions it was possible to prepare a continuous, although metastable series of solid solutions with the fluorite structurewith compositions varying from ThO₂, to nearly pure ZrO₂. Contrary to earlier work only 8 mole ZrO₂, dissolves in UO₂ and less than 4 mole of UO, in ZrO₂ at temperatures up to 13OO0C. A continuous series of solid solutions could be made between Th₂ and UO₂ at 13OO°C., and extensive defect fluorite solid solutions could be prepared between Tho₂ and U₃O₈; there is some evidence for exsolution into uranium-rich and thorium-rich members at low temperatures.