Multigigabit/s demultiplexing in optical domain using coherence properties of pulse trains from multiple, asynchronous mode-locked lasers

It is shown that the unique coherence properties of mode-locked lasers can be exploited to provide new opportunities for high-speed data transmission. Using passive Mach-Zehnder optical delay stages, very high bit rate optical data streams constructed from asynchronously combined transmitters can be demultiplexed directly in the optical domain, without imposing restrictions on the source wavelength. Potential implementation and performance of the technique are discussed.<>     

Transient operation of a catalytic liquid-liquid plug flow reactor for kinetics measurements

A centrifugal partition chromatograph (CPC) was used as a liquid-liquid catalytic reactor for the isomerisation of hexen-3-ol into ethylpropylketone with a water soluble rhodium catalyst. Global mass transfer coefficients were measured and shown to depend on both the nature of the solute and the flow rate. Liquid-liquid partition isotherms were also determined with the CPC using elution chromatography. Finally, a reactor model was derived to account for the experimental results obtained both under stationary and transient (pulse) conditions. A parameter sensitivity evaluation is also presented.     

Predominant expression of monoamine oxidase B isoform in rabbit renal proximal tubule: regulation by I2 imidazoline ligands in intact cells

Previous studies have shown that a subpopulation of the catecholamine-degrading enzymes monoamine oxidase (MAO) A and B holds a previously unknown regulatory site, the I2-imidazoline binding site (I2BS). In the present work, we characterized the isoforms of monoamine oxidases expressed in the rabbit renal proximal tubule, defined their relationship with I2BS, and investigated the ability of I2BS ligands to inhibit enzyme activity in intact cells. Two findings indicate that MAO-B is the predominant isoform expressed in the renal proximal tubule cells: 1) Western blot performed with an anti-MAO-A/MAO-B polyclonal antiserum revealed a single 55-kDa band corresponding to MAO-B; 2) enzyme assays showed an elevated MAO-B activity ([14C]beta-phenylethylamine oxidation: Vmax = 1.31 +/- 0.41 nmol/min/mg protein), whereas MAO-A activity was only detectable ([14C]5-HT oxidation: Vmax = 80.3 +/- 19 pmol/min/mg protein). Photoaffinity labeling with the I2BS ligand [125I]2-(3-azido-4-iodophenoxy)-methylimidazoline revealed a single 55-kDa band, which indicates that MAO-B of the renal proximal tubule cells holds the I2 imidazoline binding site. [3H]Idazoxan binding studies and enzyme assays showed that, in intact cells, I2BS ligands bind to and inhibit MAO-B. Indeed, the increase in the accessibility of intracellular compartment by cell permeabilization did not enhance [3H]idazoxan binding, which indicates that, in intact cells, intracellular I2BS are fully occupied by imidazoline ligands. In addition, enzyme assays showed that incubation of proximal tubule cells with imidazoline ligands leads to a complete, dose-dependent inhibition of MAO activity. These data show the predominant expression of MAO-B in rabbit renal proximal tubule and its regulation by imidazoline ligands in intact cells.     

Simultaneous design of power stage and controller for switchingpower supplies

This paper develops a method for simultaneously designing the power stage and controller for a switching power supply. The method utilizes a numerical optimization procedure, which facilitates computer-aided design. It is found that better performance can be achieved than with a traditional two-step design process, where the power stage and controller are designed sequentially. Optimization and simulation results for a buck power converter are presented to illustrate the design process and benefits     

A multilevel soliton communication system

A multilevel soliton communication system is proposed and assessed. In this system, at the transmitter end each channel transmits its data via fundamental solitons with a pre-specified amplitude (i.e., soliton width). At the receiver end we take advantage of the sensitive relationship between the amount or fundamental soliton self-wavelength shift and the width of the soliton in the subpicosecond region. We first compress the incoming soliton noises to the subpicosecond level and pass them through a short length of fiber at the end of which the pulses have become separated in the wavelength domain since each soliton, corresponding to a data channel, has experienced a different Raman self-wavelength shift. The channels are then easily separated by optical filters. We have derived the design constraint relations for such a system. We have then heuristically designed a 40 Gbs (four channels) system for a 1000 km propagation distance (total data-rate distance product of 40 Tb/km). Numerical simulations and noise analyses have verified the feasibility and practicality of the proposed system with very good design margins. The wavelength jitter is found to be much smaller than the desired filter spacing, and thus its contribution to the bit error rate is negligible. We also argue that the system is more tolerant to Gordon-Haus timing jitter than conventional TDM soliton systems. The system is all fiber and is, therefore very cost effective as it does not require sophisticated electro-optic and microwave circuits for demultiplexing. The system can potentially operate at much higher speeds than those achievable in conventional soliton systems and it can be used in parallel with WDM soliton system     

Synthesis and release of ATP by soluble mitochondrial F1 in complex with its inhibitor protein during dimethylsulfoxide-water transitions

Soluble mitochondrial F1 and F1 in complex with the natural ATPase inhibitor protein (F1-IP) catalyze the spontaneous synthesis of [gamma-32P]ATP from medium [32P]phosphate and enzyme-bound ADP when incubated in media with dimethylsulfoxide (Me2SO); under these conditions, the synthesized [gamma-32P]ATP is not released into the media, it remains tightly bound to the enzymes [Gómez-Puyou, A., Tuena de Gómez-Puyou, M. & de Meis, L. (1986) Eur. J. Biochem. 159, 133-140]. Some of the characteristics of the synthesized [gamma-32P]ATP were studied in F1 and F1-IP (ATPase activities of 70 and 1-3 micromol x min(-1) x mg(-1), respectively). In Me2SO media, gamma-phosphate of synthesized ATP in F1 or F1-IP exchanges with medium phosphate. From the rates of the exchange reaction, the half-times for hydrolysis of the synthesized ATP in F1 and F1-IP were calculated: 45 min and 58 min for F1 and F1-IP, respectively. The course that synthesized [gamma-32P]ATP follows after dilution of the Me2SO synthetic mixture with aqueous buffer was determined. After dilution, the half-life of synthesized ATP in F1 was less than 1 min. In F1-IP, ATP was also hydrolyzed, but at significantly lower rates. In F1-IP, dilution also produced release of the synthesized [gamma-32P]ATP. This was assayed by the accessibility of [gamma-32P]ATP to hexokinase. About 25% of [gamma-32P]ATP synthesized in F1-IP, but not in F1, was released into the media after dilution with aqueous buffer that contained 20 mM phosphate. Release of tightly bound ATP required the binding energy of phosphate and solvation of F1-IP, however, the particular kinetics of F1-IP were also central for medium ATP synthesis in the absence of electrochemical H+ gradients.     

Response spectrum analysis of piping systems with elastic-plastic gap supports

A new seismic support device and its application in piping systems is described. The device, E-BAR (patented), can be cost effectively used for snubber replacement programs, mitigation of hydraulic transients, pipe whip and as a thermal stop. The device has pre-set gaps to allow free thermal movement. During a seismic or other dynamic load event, if the pipe movement exceeds the gap dimension, the device acts as an elastic or elastic-plastic restraint. The device also has a unique design feature for not exceeding the restraint force beyond a specified limit design value. To analyze piping systems with gap supports having elastic-plastic characteristics, modal analysis procedures for both response spectrum and time history methods are developed. The comparison of responses obtained from the procedures with nonlinear time history analysis and test results available in the literature shows excellent correlation. A pilot program conducted for snubber replacement with E-BARs demonstrates that the limit force feature of E-BAR makes them very attractive for snubber replacement. This is because a particular E-BAR with a specified limit design force can be selected, such that, the E-BAR replacing the snubber does not require any modifications be made to the existing support steel and hardware.