INVESTIGATION OF A NOVEL MICROREACTOR FOR ENHANCING MIXING AND CONVERSION

A novel microreactor with a network of omega-shaped microchannels has been designed, fabricated, and tested for enhanced chemical species mixing and reaction conversion. Fluidic and mixing properties of the omega channel reactor have been investigated by means of computational fluid dynamic (CFD) simulation. Also, a stochastic model describing particle transport in the axial direction was applied to characterize the residence time distribution or the cumulative probability of a particle exiting the microreactor over time. Both fluidic simulation and stochastic model approaches revealed the advantage of the omega-shaped microchannels as compared to straight or zigzag-shaped microchannels. Fischer-Tropsch reactions were carried out using sol-gel encapsulated iron and cobalt catalysts in the omega-shaped microchannels. The experimental results showed that the conversion rate for the omega-shaped microchannels was considerably higher than that for the conventional straight microchannel or for the zigzag-shaped microchannels. These results were consistent with the fluidic simulation and the stochastic modeling results.     

Enhanced properties of lignin-based biodegradable polymer composites using injection moulding process

Composites from polybutylene succinate (PBS) and lignin-based natural material were fabricated using a melt mixing process. The effects of lignin material and polymeric methylene diphenyl diisocyanate (PMDI) compatibilizer on the properties of composites were investigated. Incorporation of 65% lignin material into PBS was achieved with an improvement in the tensile and flexural properties of composites. Incorporation of 1% PMDI in 50% lignin filled composites enhanced the tensile, flexural and impact strength simultaneously. Heat deflection temperature (HDT) of the virgin plastic also increased with lignin and PMDI incorporation. Improved interfacial adhesion was observed from SEM micrographs of the compatibilized composites.     

A study of phase separation in ternary alloys

We have studied the evolution of microstructure when a disordered ternary alloy is quenched into a ternary miscibility gap. We have used computer simulations based on multicomponent Cahn-Hilliard (CH) equations for c _A and c_B, the compositions (in mole fraction) of A and B, respectively. In this work, we present our results on the effect of relative interfacial energies on the temporal evolution of morphologies during spinodal phase separation of an alloy with average composition, c_A = 1/4, c_B = 1/4 and c_c = 1/2. Interfacial energies between the ‘A’ rich, ‘B’ rich and ‘C’ rich phases are varied by changing the gradient energy coefficients. The phases associated with a higher interfacial energy are found to be more rounded than those with lower energy. Further, the kinetic paths (i.e. the history of A-rich, B-rich and C-rich regions in the microstructure) are also affected significantly by the relative interfacial energies of the three phases.     

Like-minded communities: bringing the familiarity and similarity together

Community detection in social networks is a well-studied problem. A community in social network is commonly defined as a group of people whose interactions within the group are more than outside the group. It is believed that people’s behavior can be linked to the behavior of their social neighborhood. While shared characteristics of communities have been used to validate the communities found, to the best of authors’ knowledge, it is not demonstrated in the literature that communities found using social interaction data are like-minded, i.e., they behave similarly in terms of their interest in items (e.g., movie, products). In this paper, we experimentally demonstrate, on a social networking movie rating dataset, that people who are interested in an item are socially better connected than the overall graph. Motivated by this fact, we propose a method for finding communities wherein like-mindedness is an explicit objective. We find small tight groups with many shared interests using a frequent item set mining approach and use these as building blocks for the core of these like-minded communities. We show that these communities have higher similarity in their interests compared to communities found using only the interaction information. We also compare our method against a baseline where the weight of edges are defined based on similarity in interests between nodes and show that our approach achieves far higher level of like-mindedness amongst the communities compared to this baseline as well.     

Why is sodium cocoyl isethionate (SCI) mild to the skin barrier?–An in vitro investigation based on the relative sizes of the SCI micelles and the skin aqueous pores

Sodium cocoyl isethionate (SCI) is an important surfactant ingredient in mild, syndet (synthetic detergent) cleansing bars. In vitro and in vivo studies have demonstrated that SCI is mild and less damaging to the skin barrier than soaps and surfactants such as sodium dodecyl sulfate (SDS). We have recently shown that SDS forms small micelles in aqueous solutions contacting the skin relative to the aqueous pores in the stratum corneum (SC), and as a result, the SDS micelles can contribute to SDS skin penetration and induce skin barrier perturbation. In this paper, we attempt to explain the well-documented skin mildness of SCI by examining the size of the SCI micelles relative to that of the aqueous pores in the SC. For this purpose, we have conducted in vitro mannitol skin permeability and average skin electrical resistivity measurements upon exposure of the skin to an aqueous SCI contacting solution in the context of a hindered-transport aqueous porous pathway model of the SC. These in vitro studies demonstrate that an SCI micelle of radius 33.5 ± 1 Å (as determined using dynamic light-scattering measurements) experiences significant steric hindrance and cannot penetrate into the SC through aqueous pores that have an average radius of 29 ± 5 Å.We believe that this inability of the SCI micelles to contribute to SCI skin penetration and associated skin barrier perturbation is responsible for the observed skin mildness of SCI. Through in vitro quantitative skin radioactivity assays using ¹⁴C-radiolabeled SCI and pig full-thickness skin (p-FTS), we also show conclusively that SCI skin penetration is dose-independent, an important finding that provides additional evidence that the larger SCI micelles cannot penetrate into the SC through the smaller aqueous pores that exist in the SC, and therefore, cannot induce skin barrier perturbation.     

Solution to the Riemann problem for a five-equation model of multiphase flows in non-conservative form

In this paper, we consider the Riemann problem for a five-equation, two-pressure (5E2P) model proposed by Ransom and Hicks for an isentropic compressible gas–liquid two-phase flows. The model is given by a strictly hyperbolic, non-conservative system of five partial differential equations (PDEs). We investigate the structure of the Riemann problem and construct an approximate solution for it. We solve the Riemann problem for this model approximately assuming that all waves corresponding to the genuinely nonlinear characteristic fields are rarefaction and discuss their properties. To verify the solver, a series of test problems selected from the literature are presented.     

Fabrication of a sulfonated aramid‐graphene nanoplatelet composite paper and its performance as a supercapacitor electrode

Sulfonated aramid (SA) fiber modified graphene nanoplatelet (GnP) paper was fabricated employing simple vacuum filtration technique. The SA macromolecules were noncovalently attached on the surface of GnP through π?π interactions. Robustness of the film was characterized via dynamic mechanical analysis study. X‐ray photoelectron spectroscopy was employed to investigate the extent of surface functionalization. The specific capacitance of 166 F/g was obtained for the sulfonated graphene nanoplatelet composite paper with 97% of specific capacitance retained after 1000 cycles establishing the cyclic stability of the said composite paper. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2017 , 134 , 45099.     

Effect of Dodecyal Amine Functionalized Graphene on the Mechanical and Thermal Properties of Epoxy‐Based Composites

Simultaneous surface functionalization and reduction of graphene oxide (GO) was achieved by using dodecyl amine (DA) as surface modifying agent. The DA modified reduced GO (DA‐G) was used for subsequent preparation of DA‐G/epoxy composites by solution mixing. Fourier transform infrared spectroscopy analysis, X‐ray diffraction (XRD) and electrical conductivity measurements were conducted to establish the concurrent functionalization and reduction of GO. The effect of DA‐G on the epoxy composites at 0 to 0.75 wt% loadings was studied by investigating its static and dynamical mechanical properties. XRD study was performed to verify the dispersion of DA‐G in the epoxy polymer. Field emission scanning electron microscopy was used to investigate the fracture surface morphology of the composites and Transmission electron microscopy was employed to further confirm the dispersion of DA‐G in the matrix. It was found that the tensile strength of the composite was increased by 38.8% with the addition of 0.5 wt% of DA‐G. The good adhesion/interaction between DA‐G and epoxy resulted in the increase of storage modulus; however, glass transition temperature (T_g) value of the composites shifted to lower temperature in comparison to the neat epoxy. Thermogravimetric analysis showed small decrease in onset degradation temperature for the composites as compared to neat epoxy except for the composites containing 0.75 wt% of DA‐G. POLYM. ENG. SCI., 56:1221–1228, 2016. © 2016 Society of Plastics Engineers     

Dielectric Relaxation and Collective Vibrational Modes of Double‐Perovskites A2SmTaO6 (A = Ba,Sr and Ca)

The crystal structures of the double‐perovskite oxide A₂SmTaO₆ series (AST, A = Ba, Sr, Ca) synthesized by solid‐state reaction technique are determined from X‐ray powder diffraction data. Rietveld refinements of the X‐ray diffraction data of the samples show that Ba₂SmTaO₆ (BST) crystallizes in cubic phase and Sr₂SmTaO₆ (SST) and Ca₂SmTaO₆ (CST) crystallize in monoclinic phase. Fourier transform infrared spectra show two primary modes of the samples at around 370 and 600 cm^?1. The vibrational properties of the samples are studied by Raman spectroscopy taken at 488‐nm wavelength. Group‐theoretical study is performed to assign the different vibrational modes of the samples in accordance with structural symmetry. The observed shifts of some vibrations in the SST and CST w.r.t. BST upon changing the A cation are tentatively explained. Dielectric spectroscopy is applied to investigate the ac electrical conductivity of AST in different temperatures between 303 and 673 K and in a frequency range of 42 Hz–1 MHz. The complex impedance plane plots show that the relaxation (conduction) mechanism in these materials is purely a bulk effect arising from the semiconductive grains. The relaxation mechanism of the samples is modeled by Cole–Cole equation. The frequency‐dependent conductivity spectra are found to follow the power law.