Are Diamonds a MEMS' Best Friend?

Next-generation military and civilian communication systems will require technologies capable of handling data/ audio, and video simultaneously while supporting multiple RF systems operating in several different frequency bands from the MHz to the GHz range [1]. RF microelectromechani-cal/nanoelectromechanical (MEMS/NEMS) devices, such as resonators and switches, are attractive to industry as they offer a means by which performance can be greatly improved for wireless applications while at the same time potentially reducing overall size and weight as well as manufacturing costs.     

Decentralizing India's urban development

Early in 1983 the Indian Planning Commission appointed four Task Forces on Housing and Urban Development to review existing urban policies and to recommend appropriate action starting from the Seventh Plan (1985–1989). The Task Forces covered four areas of major concern: (1) urban planning, (2) urban finance, (3) urban organizations, and (4) urban shelter. They submitted their reports by the end of 1983, and taken together these constitute the most significant review of urban policy ever undertaken in India. ¹ The Task Forces had distinguished urban experts, both officials and academics, as members, with a common Member-Secretary from the Planning Commission. The common theme in all four reports is a plea for a decentralized and equitable approach towards urban development in the country.     

Design of particle-reinforced polyurethane mould materials for soft tooling process using evolutionary multi-objective optimization algorithms

Polyurethane is used for making mould in soft tooling (ST) process for producing wax/plastic components. These wax components are later used as pattern in investment casting process. Due to low thermal conductivity of polyurethane, cooling time in ST process is long. To reduce the cooling time, thermal conductive fillers are incorporated into polyurethane to make composite mould material. However, addition of fillers affects various properties of the ST process, such as stiffness of the mould box, rendering flow-ability of melt mould material, etc. In the present work, multi-objective optimization of various conflicting objectives (namely maximization of equivalent thermal conductivity, minimization of effective modulus of elasticity, and minimization of equivalent viscosity) of composite material are conducted using evolutionary algorithms (EAs) in order to design particle-reinforced polyurethane composites by finding the optimal values of design parameters. The design parameters include volume fraction of filler content, size and shape factor of filler particle, etc. The Pareto-optimal front is targeted by solving the corresponding multi-objective problem using the NSGA-II procedure. Then, suitable multi-criterion decision-making techniques are employed to select one or a small set of the optimal solution(s) of design parameter(s) based on the higher level information of the ST process for industrial applications. Finally, the experimental study with a typical real industrial application demonstrates that the obtained optimal design parameters significantly reduce the cooling time in soft tooling process keeping other processing advantages.     

Effects of Silicon on Growth,Yield and Fruit Quality of Cantaloupe under Drought Stress

Silicon - Silicon (Si) plays an important role in mitigating adverse effects of various biotic and abiotic stresses including drought. Polyhouse experiment was conducted to evaluate the effects of...     

Nanoscale Studies of the Early Stages of Oxidation of a TiAl-Base Alloy

The strategy to perform nanoscale studies of the initial stages of oxidation of TiAl involved first gaining some information on the electronic structure of pure TiO₂ surfaces and then on TiAl surfaces before and after oxidation both in low- and high-oxygen potentials. Both materials were studied in atomically-cleaned states generated by repeated sputtering and heating. It was found that the oxygen vacancies created additional defect states in the band gap of stoichiometric TiO₂. The results obtained on TiO₂ were used as fingerprints to study the oxide nucleation. The results on the initial stages of oxidation of TiAl confirm the nucleation of Ti₂O₃ islands of nanometer size and monolayer height in a low-oxygen-pressure environment, whilst a TiO₂ layer developed in an atmospheric environment. The ledges on atomically-cleaned surfaces usually acted as nucleation sites.     

Prediction of burning rate of coal in fluidized-bed combustion

A theory has been proposed to evaluate the burning rate of a single carbon particle in a continuously operated coal-fired fluidized bed. Experimental verification was carried out in a laboratory scale 200 mm × 200 mm combustor. The burning rate increases with the increase of the fluidization velocity and the size of the bed material. The predicted data on burning rate agree fairly well with the experimental values. The gas concentration in the bed and freeboard has also been measured and it is seen that the consumption of oxygen mostly takes place in the bed.     

Anodic film studies on nickel under high rate transpassive dissolution conditions

Coulometry and Auger Electron Spectroscopy (AES) were employed to study thickness and composition of anodic films formed on nickel under high rate transpassive dissolution conditions. Nickel anodes were polarized at constant current densities up to 30 A/cm² in alkaline nitrate electrolytes of different nitrate and hydroxyl ion concentration using a flow channel cell with a constant electrolyte flow velocity of 10m/sec. Results show that with increasing current density film thickness goes through a maximum. Nitrogen is detected at the apparent film metal interface in the current region where metal dissolution occurs. No correlation between anodic film thickness and dissolution efficiency is found. The data, together with previous observations, suggest that high rate transpassive dissolution takes place from film free sites.     

Mechanical and dynamic mechanical properties of jute fibers–Novolac–epoxy composite laminates

A study was done of jute composite using a polymer matrix of epoxidized Novolac resin (ENR), diglycidyl ether of bisphenol A (DGEBA)–based epoxy, and their blends with different weight percentages of the resins. It was found that on blending ENR with DGEBA, the storage modulii at room temperature are enhanced by about 100% or more in the case of 30 and 40% ENR‐containing matrices, whereas the enhancement in the case of 20 and 12% ENR‐containing matrices is only 50% that of the pure matrix. It was also observed that the tan δ peak heights of the composites containing 30 and 40% ENR are closer to that of 20% ENR‐containing composite. The probable explanation drawn on the basis of experimental findings of DMA and mechanical analysis is that by blending ENR with DGEBA epoxy it is possible to manufacture jute composites with increased stiffness without sacrificing their ductility. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 85: 2800–2807, 2002     

Increasing productivity and protein content using early-maturing rices and efficient nitrogen management

Germplasm with shorter duration than that of the currently grown varieties is being generated to maximize productivity of irrigated rice. However, short-duration varieties often produce yields lower than the medium- and long-duration varieties. Experiments were conducted during the 1980–82 dry and wet seasons to increase productivity through the use of very early-maturing rices and the improved management of nitrogen (N) fertilizers.Results over three years showed that IR58 and IR9729-67-3 (growth duration 100 ± 5 days) yield as well as or higher than IR36 although earlier maturing. They generally had a higher productivity (kg ha^–1 day^–1) than IR36 (110 ± 5 days).Three years' data suggest that the improved timing of broadcast applications of urea in split doses increased grain yield comparable with the basal incorporation of slow-release sulfur-coated urea (SCU) or deep point-placement of urea supergranules (USG).Results on elite breeding lines showed that the early-maturing IR9729-67-3 produced higher protein yield ha^–1 than longer duration varieties such as IR8 and IR42 in the dry season. Furthermore, contrary to earlier results, single basal incorporation of slow-release SCU increased the protein yield of rice by 53 kg ha^–1 and deep point-placement of USG by 43 kg ha^–1 over split application of prilled urea.     

Studies on the reaction of bis(diisopropyl) thiophosphoryl disulfide with silica in the vulcanization of NR

The reaction between bis(diisopropyl) thiophosphoryl disulfide (DIPDIS) and silica has been investigated. The study reveals that DIPDIS can be used as a coupling agent for silica. The chemical bond between the silanol groups of silica and DIPDIS has been established through the isolation and characterization of isopropyl alcohol that is eliminated from the reaction. The chemical nature of the bond is also supported by the IR analysis of the reaction products of silica and DIPDIS obtained both in the presence and absence of rubber. From the exploratory studies it is indicated that DIPDIS can also react with NR even during mixing of ingredients. When used with 2-mercaptobenzothiazole (MBT) or N-oxydiethylene-2-benzothiazole sulfenamide (OBTS) in the presence of silica, DIPDIS exhibits notable activation of cure and enhances the torque, modulus, tensile strength, and the scorch safety.