Performance of Recalibrated Equations for the Estimation of Daily Reference Evapotranspiration

An accurate estimation of reference evapotranspiration (ET₀) is of paramount importance for many studies such as hydrologic water balance, irrigation system design and management, crop yield simulation, and water resources planning and management. In the present study, Blaney-Criddle, Jensen-Haise and Hargreaves (temperature based), Priestley-Taylor, Radiation and Makkink (radiation based) and, Pan Evaporation and Christiansen (pan evaporation based) methods have been evaluated and recalibrated with respect to FAO-56 Penman-Monteith method for estimating daily ET₀ in the semi-arid Tirupati, Nellore, Rajahmundry, Anakapalli and Rajendranagar sites of Andhra Pradesh, India. Recalibrated Blaney-Criddle (temperature based), Radiation (Radiation based) and Christiansen (Pan evaporation based) methods showed a satisfactory performance at the sites. Further, recalibrated Blaney- Criddle method showed relatively better performance than Radiation and Christiansen methods in the daily ET₀ estimation. Recalibrated Blaney- Criddle method may therefore be adopted at the sites selected for the present study and also at the sites with similar climatic conditions for satisfactory daily ET₀ estimation.     

Dispersion-tolerant 10-gb/s duobinary system employing heterodyne detection and MLSE

We experimentally demonstrate a 10.7-Gb/s duobinary transmission system operating over a chromatic-dispersion range of /spl sim/12 000 ps/nm. Heterodyne detection and maximum-likelihood sequence estimation are employed to achieve this result.     

Review Processing, properties and applications of reactive silica from rice husk—an overview

Rice husk is an abundantly available waste material in all rice producing countries. In certain regions, it is sometimes used as a fuel for parboiling paddy in the rice mills. The partially burnt rice husk in turn contributes to more environmental pollution. There have been efforts not only to overcome this but also to find value addition to these wastes using them as secondary source of materials. Rice husk contains nearly 20% silica, which is present in hydrated amorphous form. On thermal treatment, the silica converts to crystobalite, which is a crystalline form of silica. However, under controlled burning conditions, amorphous silica with high reactivity, ultra fine size and large surface area is produced. This micro silica can be a source for preparing advanced materials like SiC, Si₃N₄, elemental Si and Mg₂Si. Due to the high pozzolanic activity, this rice husk silica also finds application in high strength concrete as a substitute for silica fume. Possibility of using this silica as filler in polymers is also studied. The present paper is an attempt to consolidate and critically analyse the research work carried out so far on the processing, properties and application of rice husk silica in various laboratories and also highlighting some results on the processing and characterization of RHA and reactive silica obtained from it in the authors' laboratory.     

Evaluation of hydroxyapatite and β-tri calcium phosphate microplasma spray coated pin intra-medullary for bone repair in a rabbit model

Here we report a comparative study of the healing kinetics of surgically created artificial defects in the tibia of New Zealand white rabbits. Comparison of the healing kinetics was made for uncoated conventional SS316L intramedullary pins, and the same pins with microplasma sprayed (MIPS) pure hydroxyapatite (HAp) and beta-tri calcium phosphate (β-TCP) coatings. After thorough material characterizations including XRD, FTIR, SEM, etc., MIPS coated pins were implanted to such animals. Serum biochemistry, radiology and fluorochrome labelling were used to evaluate the comparative healing kinetics of these implants in vivo. In comparison to those of the uncoated pins, the pins coated with both MIPS HAp and β-TCP showed significant increment of alkaline phosphatase up to 15th postoperative day, insignificant changes in serum phosphorus and calcium with uneventful healing of bone defect. There was development of Havarsian canals and well-defined peripherally placed osteoblasts along with evidence of angiogenesis and comparatively more new bone formation in the defect site. On a comparative scale, the performance of the β-TCP coated intramedullary pins was much better than that of the pure HAp coated pins than the uncoated intramedullary pins.     

Matched‐dual‐polymer electrochromic lenses,using new cathodically coloring conducting polymers,with exceptional performance and incorporated into automated sunglasses

Reported are syntheses of several new monomer precursors of cathodically coloring conducting polymers (CPs), based on a propylene dioxythiophene skeleton. These are shown to yield CPs—both as homopolymers and as copolymers—that are nearly “perfectly” matched electrochemically and electrochromically with a set of anodically coloring poly(aromatic amines), for use in dual‐polymer electrochromic lenses. Resulting dual‐polymer electrochromic lenses display very high light/dark contrast (typically up to 70/7% or 50/0.5% Transmission (integrated over visible spectrum, vs. air reference), Haze < 2%, very high cyclability (> 10 K cycles), multiyear shelf life, appealing transparent to dark‐blue‐black transition, and excellent optical memory. Dramatic lowering of switching time, from 8 to < 1 s, is demonstrated using unique applied‐potential algorithm resident on inexpensive Microcontroller chip. Working, practical dual‐polymer electrochromic spectacles are demonstrated with electrochromic lenses retrofitted to spectacles meeting ANSI Z87.1, GL‐PD 10–12 (U.S. military) specifications. These incorporate photosensor, rechargeable Li battery, Microcontroller, allow for automated operation. Ab‐initio‐design spectacles, also conforming to above specifications, are also demonstrated, with components seamlessly hidden within frame. To the best of our knowledge, the electrochromic lenses and sunglasses reported herein represent the best visible‐region electrochromic performance for dual‐polymer CP electrochromic systems to date and the first practical implementation in working sunglasses. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 41043.     

Investigation of Mechanical and Microstructural Properties of Fiber-Reinforced Geopolymer Concrete with GGBFS and Metakaolin: Novel Raw Material for Geopolymerisation

Silicon - In modern days, one or the way, development of infrastructure plays a major role that decides upon the matrix of our lifestyle. The development of geopolymer concrete (GPC) is an...     

An Efficient and Scalable Quasi-Aggregate Signature Scheme Based on LFSR Sequences

Aggregate signatures can be a crucial building block for providing scalable authentication of a large number of users in several applications like building efficient certificate chains, authenticating distributed content management systems, and securing path vector routing protocols. Aggregate signatures aim to prevent resources (signature and storage elements, and computation) from growing linearly in the number of signers participating in a network protocol. In this paper, we present an efficient and scalable quasi-aggregate signature scheme, {rm CLFSR}- {rm QA}, based on third-order linear feedback shift register (cubic LFSR) sequences that can be instantiated using both XTR and GH public key cryptosystems. In the proposed {rm CLFSR}-{rm QA} construction, signers sign messages sequentially; however, the verfier need not know the order in which messages were signed. The proposed scheme offers constant length signatures, fast signing, aggregation, and verification operations at each node, and requires the least storage elements (public keys needed to verify the signature), compared to any other aggregate signature scheme. To the best of our knowledge, {rm CLFSR}- {rm QA} is the first aggregate signature scheme to be constructed using LFSR sequences. We believe that the {rm CLFSR}- {rm QA} signature scheme can be catalytic in improving the processing latency as well as reducing space requirements in building secure, large-scale distributed network protocols. We perform extensive theoretical analysis including correctness and security of {rm CLFSR}- {rm QA} and also present a performance (computation and communication costs, storage overhead) comparison of the proposed scheme with well-known traditional constructions.     

40 Gbit/s RZ wavelength converter in a monolithically integrated chip with a tunable laser

An all-optical wavelength-switch module with 40 Gbit/s capacity is integrated monolithically in InP. The device combines an SOA-based wavelength converter and a fast-tunable 8-channel multi-frequency laser. Error-free operation is demonstrated.     

Fig tree sap: antithrombogenicity on nylon surfaces

An effort is made to study the anti-thrombogenic property of the latex of fig tree by immobilizing its components on nylon surface. It is also evaluated, how such surfaces may effect the blood compatibility by investigating variations in surface energy parameters, plasma recalcification time and platelet adhesion using calf’s blood.     

Fast ion transport in the new mixed system (CuI)x·[(Ag2O)2·(V2O5)]100−x (40≤x≤80)

The new mixed system (Cul) _x ·[(Ag₂O)₂·V₂O₅)]_100–x where x=40, 45, 50, 55, 60, 65, 70, 75 and 80 mol% was investigated as a possible glassy fast ion conductor by preparing molten mixtures and quenching them to low temperatures. The analysis of their composition was carried out using differential scanning calorimetry (DSC) and powder X-ray diffraction (XRD) techniques. These studies have confirmed the formation of new substances. Formation of AgI in some samples was also revealed by XRD analysis and by the occurrence of a characteristic phase transition temperature around 420 K identified through DSC experiments as well. Detailed temperature-dependent a.c. electrical conductivity studies were carried out on the new materials by a.c. impedance analysis in the frequency range 65.5 kHz-1 Hz and over the temperature range 293 to 398 K. It has been found that the highest electrical conductivity of 3.64×10^–3 S cm^–1 at 305 K due to the migration of Ag⁺ ions and the lowest activation energy of 0.1 eV in the above temperature range of investigation could be realized for the composition 40CuI-40Ag₂O-20V₂O₅ in the mixed system.