Anatase-Type TiO2 and ZrO2-Doped TiO2 Directly Formed from Titanium(III) Sulfate Solution by Thermal Hydrolysis: Effect of the Presence of Ammonium Peroxodisulfate on their Formation and Properties

Anatase-type TiO₂ powder containing sulfur with absorption in the visible region was directly formed as particles with crystallite in the range 15–88 nm by thermal hydrolysis of titanium(III) sulfate (Ti₂(SO₄)₃) solution at 100°–240°C. Because of the presence of ammonium peroxodisulfate ((NH₄)₂S₂O₈), the yield of anatase-type TiO₂ from Ti₂(SO₄)₃ solution was accelerated, and anatase with fine crystallite was formed. Anatase-type TiO₂ doped with ZrO₂ up to 9.8 mol% was directly precipitated as nanometer-sized particles from the acidic precursor solutions of Ti₂(SO₄)₃ and zirconium sulfate in the presence and the absence of (NH₄)₂S₂O₈ by simultaneous hydrolysis under hydrothermal conditions at 200°C. By doping ZrO₂ into TiO₂ and with increasing ZrO₂ content, the crystallite size of anatase was decreased, and the anatase-to-rutile phase transformation was retarded as much as 200°C. The anatase-type structure of ZrO₂-doped TiO₂ was maintained after heating at 1000°C for 1 h. The favorable effect of doping ZrO₂ to anatase-type TiO₂ on the photocatalytic activity was observed.     

Design of recursive digital filters for the selection or rejection of a particular velocity in seismic signals

In this paper a new type of velocity-selecting/rejecting filter which passes or stops a particular event in a seismic signal is proposed. The velocity-selecting filter is based on a time-space band-pass filter with sharp passband for a particular direction, and similarly, the velocity-rejecting filter is based on a time-space band-stop filter. A technique for designing such filters, in terms of an infinite-impulse-response (IIR) filter, is presented, in which a rotated version of separable filter is used. Finally, numerical examples are included to illustrate the design theory.     

Interdiffusion in Co-Mn alloys

Interdiffusion coefficient in cobalt-manganese alloys has been determined by Matano's method in the temperature range between 1133 and 1423 K on (pure Co)-(Co-30.28 at. pct Mn alloy) and (pure Co)-(Co-51.76 at. pct Mn alloy) couples. This, ∼D, has been found to increase with the increase of manganese content. However, the activation energy (∼Q) and frequency factor ( ₀) show a maximum at about 10 at. pct Mn. The concentration dependence of and has been discussed taking into account the thermodynamic properties of the alloy. The difference in between the ferro- and paramagnetic phases in Co-5 at. pct Mn alloy has been found to be 24 kJ/mol, which is larger, than that for the diffusion of Mn⁵⁴ in this alloy. Further it has been found that the Kirkendall marker moves toward manganese-rich side, showing that manganese atoms diffuse faster than cobalt atoms. From the marker shift, the intrinsic diffusion coefficients,D _Co andD _Mn, at 33 at. pct Mn have been determined as follows:D _Co=0.22×10⁻⁴ exp(−263 kJ mol⁻¹/RT) m²/s, andD _Mn=0.98×10⁻⁴ exp(−229 kJ mol⁻¹/RT) m²/s.     

High-intensity multi-bunch beam generation by a photo-cathode RF gun

A multi-bunch photo-cathode RF gun system has been developed as an electron source for the production of intense quasi-monochromatic X-rays based on inverse Compton scattering. The desired multi-bunch beam is 100 bunches/pulse with a total charge of 500 nC and a bunch spacing of 2.8 ns. We modified the gun cavity of a ‘BNL-type IV’ RF gun to allow a CsTe cathode plug in the end plate. The system uses a four-dipole chicane beam line to allow the injection of laser light normal to the cathode surface. We compensate the gun cavity beam loading caused by the high-intensity multi-bunch electron beam by injecting the laser pulse before RF power has filled the cavity. We have achieved a total intensity of 220 nC in 100 bunches with a bunch-to-bunch energy spread under 1.3% (peak-to-peak). This paper concentrates on experiments to generate the high-intensity multi-bunch beam with compensation of the bunch-to-bunch energy spread due to heavy beam loading.     

Magnetic field analysis by edge elements of magnetic components considering inhomogeneous current distribution within conductor windings

For magnetic field analysis by edge elements of the magnetic components, the method considering inhomogeneous current distribution within the conductor windings is investigated. To consider the inhomogeneous current distribution within the windings, we utilized the magnetic vector potential represented by edge elements and the current conservation equation represented by nodal elements in the region of the windings. In the first application, the eddy-current model, which has the conventional wire winding, was analyzed. For correct analysis using our method, it is required that all turns of the wire winding be divided into meshes. However, if the region of the wire winding does not exceed the winding window of the magnetic core, even the combination of our method and the solidly modeled wire winding enables us to correctly analyze the transformer and the inductor with conventional wire winding. In the second application, a flat transformer with conductor winding, such as a copper foil or sheet, was analyzed. The magnetic flux densities within the flat core and the inductance calculated by our method were in good agreement with the experiments. Thus, we confirmed the effectiveness of our method considering inhomogeneous current distribution within the conductor windings.     

Effect of water vapor and hydrocarbons in removing NOxby using nonthermal plasma and catalyst

Removal of NO_x in flue gas was investigated by using nonthermal plasma with catalysts. In this experiment, flue gas contained 5%-15% water vapor and hydrocarbons, as well as nitrogen, oxygen, and carbon dioxide. Catalysts tested in this paper were copper- and sodium-coated zeolite (CuZSM-5, NaZSM-5) and a conventional three-way catalyst (Pt-Rh, alumina cordierite). The simulated flue gases had from 0% to 15% water vapor, 70% NO removal was achieved with NaZSM-5 catalyst at 200°C-500°C, with 10% moisture and the power to the reactor turned off. High-temperature removal of NO_x was the result of plasma chemical reactions and adsorption in the catalyst. However, nonthermal plasma degrades the NO_x removal with CuZSM-5 catalyst, when the gas temperature is 300°C or above. When the gas temperature was 100°C, the nonthermal plasma process was enhanced by the combination of nonthermal plasma with any type of catalyst. The catalysts investigated in this paper do not work at lower temperatures by themselves. Adsorption characteristics were also investigated and only NaZSM-5 catalyst showed significant adsorption     

Theranostic Agent Combining Fullerene Nanocrystals and Gold Nanoparticles for Photoacoustic Imaging and Photothermal Therapy

Developing photoactivatable theranostic platforms with integrated functionalities of biocompatibility, targeting, imaging contrast, and therapy is a promising approach for cancer diagnosis and therapy. Here, we report a theranostic agent based on a hybrid nanoparticle comprising fullerene nanocrystals and gold nanoparticles (FGNPs) for photoacoustic imaging and photothermal therapy. Compared to gold nanoparticles and fullerene crystals, FGNPs exhibited stronger photoacoustic signals and photothermal heating characteristics by irradiating light with an optimal wavelength. Our studies demonstrated that FGNPs could kill cancer cells due to their photothermal heating characteristics in vitro. Moreover, FGNPs that are accumulated in tumor tissue via the enhanced permeation and retention effect can visualize tumor tissue due to their photoacoustic signal in tumor xenograft model mice. The theranostic agent with FGNPs shows promise for cancer therapy.     

Syndiotactic‐specific radical polymerization of N‐isopropylacrylamide in toluene at low temperatures in the presence of silyl alcohols

The radical polymerization of N‐isopropylacrylamide was carried out in toluene at low temperatures in the presence of silyl alcohols, such as triethylsilanol. Poly(N‐isopropylacrylamide) with a racemo dyad content of 75% was obtained at ? 80 °C with a 4:1 triethylsilanol to monomer ratio loading. NMR analysis suggests that the mechanism for syndiotactic induction, in the presence of silyl alcohols, may be similar to that observed with alkyl alcohols. In this case, a 1:2 complex formation, via hydrogen bonding interactions, leads to the induction of syndiotactic specificity. Copyright © 2012 Society of Chemical Industry     

Polymerized ionic liquids with guanidinium cations as host for gel polymer electrolytes in lithium metal batteries

Polymerized ionic liquids (PILs) having guanidinium cations with different counter‐anions, such as PF₆^? and N(CF₃SO₂)₂^? (TFSI^?), were synthesized by copolymerization of a guanidinium ionic liquid monomer with methyl acrylate followed by an anion exchange reaction. Furthermore, incorporating a guanidinium ionic liquid, LiTFSI salt and nano‐size SiO₂, a quaternary gel polymer electrolyte based on one of the PILs as the polymer host was prepared. The quaternary gel polymer electrolyte was chemically stable even at a higher temperature of 80 °C in contact with the lithium anode. In particular, the electrolyte exhibited high lithium ion conductivity, wide electrochemical stability window and good lithium stripping/plating performance. Li/LiFePO₄ batteries with the quaternary gel polymer electrolyte at 80 °C had capacities of 140 and 130 mA h g^?1 respectively at 0.1 and 0.2 C current rates. Copyright © 2011 Society of Chemical Industry