IMPINGING JET DRYER

In coating and gravure printing, an impinging jet nozzle with high thermal efficiency for drying of coated film was developed.

Trial production 0f 40 kinds of nozzle enables to develop a high-performance impinging jet nozzle with heat transfer coefficient 1.5 times larger than that of current slit nozzle, through measurement of heat transfer coefficient, visualizations of air flow and heat transfer, and measuremenu of jet velocity and turbulence distribution. The purpose of the trial production was to expand a range of high heat transfer and promote turbulence compared with the current nozzle.

Paying attention to mass transfer within gravure ink coated film, drying characteristic of the film was analyzed by numerical solution of a set of equations governing the drying process in which concentration dependencies 0f the diffusion coefficient and the equilibrium vapor pressure were considered.

Applying these analyses. an industrial scale dryer with excellent drying efficiency has finally been developed.     

Application of step‐response test for evaluation of uncertainty of standard measuring system for lightning‐impulse high voltage

In evaluating the uncertainty of the standard measuring system for lightning‐impulse high voltages, which is composed of a standard voltage divider, a digital recorder, and calibrators, step‐response tests of the standard voltage divider may be useful. In this paper, a convolution algorithm is employed to calculate the output impulse voltage waveforms from measured step‐response waveforms. The uncertainties of peak‐value measurement due to the influence of the nominal epoch, uncertainty of the peak‐value measurement due to dispersion of the AC scale factor, and uncertainty of the virtual front‐time measurement due to long‐term stability are evaluated. Furthermore, the error of the virtual front time of the output waveforms is discussed. The front part of the step‐response waveform, t≤ T₃₀%, does not influence the error of the virtual front time. Therefore, for the standard voltage divider, the step‐response parameters, that is, the experimental response time, partial response time, settling time, and overshoot, have almost nothing to do with the error of the virtual front time. © 2012 Wiley Periodicals, Inc. Electr Eng Jpn, 180(2): 24–32, 2012; Published online in Wiley Online Library ( wileyonlinelibrary.com ). DOI 10.1002/eej.21279     

Thermoelectric Properties of Multifilled Skutterudites with La as the Main Filler

Bulk multifilled n- and p-type skutterudites with La as the main filler were fabricated using the spark plasma sintering (SPS) method. The thermoelectric properties and thermal stability of these skutterudites were investigated. It was found that the interactions among the filling atoms also play a vital role in reducing the lattice thermal conductivity of the multifilled skutterudites. ZT = 0.76 for p-type La_0.8Ba_0.01Ga_0.1Ti_0.1Fe₃CoSb₁₂ and ZT = 1.0 for n-type La_0.3Ca_0.1Al_0.1Ga_0.1In_0.2Co_3.75Fe_0.25Sb₁₂ skutterudites have been achieved. Furthermore, the differential scanning calorimetry (DSC) results show that there is no skutterudite phase decomposition till 750°C for the La_0.8Ba_0.01Ga_0.1Ti_0.1Fe₃CoSb₁₂ sample. The thermal stability of the La_0.8Ba_0.01Ga_0.1Ti_0.1Fe₃CoSb₁₂ skutterudite is greatly improved. Using the developed multifilled skutterudites, the fabricated module with size of 50 mm × 50 mm × 7.6 mm possesses maximum output power of 32 W under the condition of hot/cold sides = 600°C/50°C.     

Cytochemistry of gastric parietal cells with high-pressure freezing followed by freeze-substitution

Gastric parietal cells were examined for changes in their ultrastructure and distribution of the proton pump during feeding and fasting states in rats. The fundic glands from rats fed ad libitum or fasted with free access to water were cryofixed using high-pressure freezing followed by freeze-substitution in acetone containing osmium or acrolein and then embedded in Epon 812 or Lowicryl K4M resin, respectively. Excellent ultrastructural preservation was achieved. During the feeding state, intracellular canaliculi and numerous microvilli were well developed, while tubulovesicles were poorly developed. In contrast, during the fasting state, the microvilli in the narrowed space of the intracellular canaliculi were tightly packed and the tubulovesicles were enlarged. Ultrathin sections were immunostained with antibodies against the alpha- and beta-subunits of the proton pump, H+ x K(+)-ATPase, using the immunogold method. The labelling was strong and clearly localized in comparison with that obtained using the conventional chemical-fixation method. Each subunit was localized on the membrane of the microvilli, intracellular canaliculi and tubulovesicles. The distribution of subunit proteins varied between the two states. During ad libitum feeding, the immunolabelling was localized strongly on the membranes of the microvilli and intracellular canaliculi. In contrast, the labelling was strong on the tubulovesicle membrane in the fasting state. The results obtained with each anti-subunit antibody by H+ x K(+)-ATPase immunostaining revealed differences in distribution and labelling density between the feeding and fasting states.     

Electron-microscopic imaging of single-walled carbon nanotubes grown on silicon and silicon oxide substrates

Direct imaging of single-walled carbon nanotubes (SWNTs) suspended on pillar-patterned Si or SiO2 substrates is investigated using transmission electron microscopy (TEM) and scanning electron microscopy (SEM). The suspended nanotubes are successfully observed by direct TEM imaging and it is seen that they have either individual or bundles of SWNTs. Low energy (< or =2 keV) SEM produces high contrast images of suspended SWNTs. On the contrary, when SWNTs contact a SiO2 substrate, they are imaged using electron-beam induced current. The image brightness depends on the length of SWNTs.     

Stability of Skutterudite Thermoelectric Materials

By multifilling with La, Ba, Ga, Ti, Yb, Ca, Al, and In, the dimensionless figure of merit ZT of filled skutterudites has been improved in this work. ZT reached 0.75 for p-type (La,Ba,Ga,Ti) _x (Fe,Co)₄Sb₁₂ (x = 0.8 to 1.0) and 1.0 for n-type (Yb,Ca,Al,Ga,In) _y (Co,Fe)₄Sb₁₂ (y = 0.7 to 0.9). After annealing at 873 K for 180 h, 300 h, 710 h, 1000 h, and 5000 h in vacuum, the Seebeck coefficient S and the electrical resistivity ρ of the samples increased while the thermal conductivity λ decreased with increasing annealing time. As a result, the ZT values of both p- and n-type skutterudites remained unchanged or were slightly improved, demonstrating the excellent thermal stability of these skutterudites.     

Stoichiometry Control for the Tuning of Grain Passivation and Domain Distribution in Green Quasi‐2D Metal Halide Perovskite Films and Light‐Emitting Diodes

Quasi‐2D metal halide perovskite films are promising for efficient light‐emitting diodes (LEDs), because of their efficient radiative recombination and suppressed trap‐assisted quenching compared with pure 3D perovskites. However, because of the multidomain polycrystalline nature of solution‐processed quasi‐2D perovskite films, the composition engineering always impacts the emitting properties with complicated mechanisms. Here, defect passivation and domain distribution of quasi‐2D perovskite films prepared with various precursor compositions are systematically studied. As a result, in perovskite films prepared from stoichiometric quasi‐2D precursor compositions, large organic ammonium cations function well as passivators. In comparison, precursor compositions of simply adding large organic halide salt into a 3D perovskite precursor ensure not only the defect passivation but also the effective formation of quasi‐2D perovskite domains, avoiding unfavorable appearance of low‐order domains. Quasi‐2D perovskite films fabricated with a well‐designed precursor composition achieve a high photoluminescence quantum yield of 95.3% and an external quantum efficiency of 14.7% in LEDs.     

Molecular evidence for maternal inheritance of the chloroplast genome in tea,Camellia sinensis (L.) O. Kuntze

BACKGROUND: Tea is the most consumed beverage worldwide after water. Yet very little is known about the genetics of tea in comparison with other crop species. Here we have taken advantage of the polymorphic nature of microsatellite DNA to investigate the mode of chloroplast inheritance in tea, Camellia sinensis (L.) O. Kuntze. This is important for the correct interpretation of phylogeny and introgression data as well as assessing the suitability of chloroplast transformation as a means for transgene containment in tea. RESULTS: The study was based on six Japanese tea cultivars, namely Aj2, CK23, Hatsumomiji, Nka05, Yamanoibuki and Kanayamidori used to generate four informative families. The parental pairs in the crosses differed at a single chlroroplast locus with respect to an imperfect microsatellite repeat of 16 nucleotide bases. In agreement with earlier cytological studies, all 61 progeny displayed a cpDNA profile that was consistent with the maternal inheritance of chloroplasts in tea. CONCLUSIONS: The data generated here provide the first molecular evidence of the plastid inheritance in tea. However, we suggest that additional families and polymorphic markers be screened for increasing the confidence in the observed maternal inheritance of chloroplasts in this important crop species. Copyright © 2011 Society of Chemical Industry     

Determination of ethychlozate and its degradation product in fruits by HPLC and LC/MS

A method was developed for the analysis of ethychlozate (CIE) and its decomposition compound, 5-chloro-3(1H)-indazolylacetic acid (CIA) in fruits by HPLC and LC/MS. The sample was homogenized with 1 mol/L HC1, and CIE and CIA were extracted with 5 mol/L HCl and acetone. They were extracted from the acetone extract with diethylether-n-hexane (2:1). CIE was hydrolyzed to CIA with methanol-4 mol/L KOH (1:1). The solution was made acidic, and CIA was extracted with diethylether-n-hexane (2:1). The extract was cleaned up on a silica gel column. CIA was determined by HPLC-UV and LC/MS (Scan or SIR). Four fruits were spiked with CIE or CIA at 0.5 microgram/g and analyzed by the proposed method with HPLC. The average recoveries were 77.2-83.2% for CIE and 71.2-89.2% for CIA. The concentrations determined by LC/MS were 10-25% higher than the values by HPLC. The limit of detection (LOD) of CIA standard solution by HPLC corresponds to 0.015 microgram/g of CIE in the sample. In the same way, the LOD of CIA by LC/MS (SIR) corresponds to 0.009 microgram/g of CIE in the sample.     

Simultaneous determination of pesticides in agricultural products by LC/MS/MS using clean-up with ultrafiltration

A method for simultaneous determination of multiple pesticide residues in agricultural products was developed by using a pretreatment with ultrafiltration, followed by liquid chromatography-tandem mass spectrometry (LC/MS/MS). The pretreatment process (extraction of pesticides from agricultural products with methanol, dilution of the extract with water, and ultrafiltration) gave recoveries in the range of 50-150% for 63 of 83 pesticides spiked at 0.25 microg/ g into 6 agricultural products. The detection limits of pesticides by LC/MS/MS were below 0.0005-0.05 micro/g. This method is useful for screening purposes and for multiresidue analysis of pesticides in agricultural products. Pesticide residues in 50 domestic crops were investigated by this method, and residues of 14 pesticides were detected in 30 crops.