Synchronal measurement of flow structure and heat transfer of impingement jet

This paper will present the characteristics of flow behavior and thermal field of both free and
impingement jet issued from a circular orifice nozzle at Re=8900.The flow behavior of a single round
jet and impingement jet was observed by smoke flow visualization recorded by a high speed camera
using 5000 frame per second.Heat transfer coefficient on the impingement surface was measured by
means of infrared camera （TVS-8500,Avio） with a two-dimensional array of Indeum-Antimony （In Sb）
sensors varying in the separation distance between the nozzle and the target plate.The heat transfer
coefficient changes in time and spatial.Therefore,the root mean square distribution of the heat
transfer was obtained from the data.As a result,it was confirmed that the longitudinal vortex was
observed outside of the ring vortex,and then the longitudinal vortex was penetrated in the jet
flow.Moreover,the high value of root mean square of the heat transfer coefficient has spread radially
in stripy manner,which is caused as the results of the longitudinal vortexes flowing in the radial
direction on the impingement plate.     

Molecular evidence for maternal inheritance of the chloroplast genome in tea,Camellia sinensis (L.) O. Kuntze

BACKGROUND: Tea is the most consumed beverage worldwide after water. Yet very little is known about the genetics of tea in comparison with other crop species. Here we have taken advantage of the polymorphic nature of microsatellite DNA to investigate the mode of chloroplast inheritance in tea, Camellia sinensis (L.) O. Kuntze. This is important for the correct interpretation of phylogeny and introgression data as well as assessing the suitability of chloroplast transformation as a means for transgene containment in tea. RESULTS: The study was based on six Japanese tea cultivars, namely Aj2, CK23, Hatsumomiji, Nka05, Yamanoibuki and Kanayamidori used to generate four informative families. The parental pairs in the crosses differed at a single chlroroplast locus with respect to an imperfect microsatellite repeat of 16 nucleotide bases. In agreement with earlier cytological studies, all 61 progeny displayed a cpDNA profile that was consistent with the maternal inheritance of chloroplasts in tea. CONCLUSIONS: The data generated here provide the first molecular evidence of the plastid inheritance in tea. However, we suggest that additional families and polymorphic markers be screened for increasing the confidence in the observed maternal inheritance of chloroplasts in this important crop species. Copyright © 2011 Society of Chemical Industry     

Phase equilibria in the Co-rich Co-Al-W-Ti quaternary system

We determined phase equilibria in the Co-rich Co-Al-W-Ti quaternary system at a temperature range between 900 °C and 1200 °C with a close attention to the thermodynamic stability of the γ′-Co₃(Al, W, Ti) (L1₂) phase, based on micro-structure observation and electron microprobe analysis on bulk alloy samples heat-treated for periods up to 2000 h. In the quaternary system the single phase field of γ′ extends from the Co-Ti binary edge to a composition of Co-5Al-8.5W-8Ti (in at.%) at 900 °C. At the tip of the single phase field, the γ′ phase is in equilibrium with the γ-Co (A1), Co₂AlTi (L2₁) and Co₃W (D0₁₉) phases. The constructed vertical section of phase diagram between Co-9.4Al-9.6W and Co-16.5Ti indicates that there is a narrow composition range around Co-4.5Al-5.4W-7.5Ti in which the γ single phase field exists at high temperatures above 1200 °C and two-phase of γ+γ′ is thermodynamically stable at low temperatures below 1100 °C.     

Applying heat integration total site based pinch technology to a large industrial area in Japan to further improve performance of highly efficient process plants

“Area-wide pinch technology” which consists of R-curve analysis and Site Source Sink Profile (SSSP) analysis, was applied to Kashima industrial area, one of the biggest heavy chemical complexes in Japan. This case study demonstrates that despite the very high efficiency of the individual sites in the complex, there is a huge amount of energy saving potential through energy sharing among the various sites. In addition it was found that appropriate use of the available pinch technology tools and techniques allows an industrial area of enormous scale and complexity to be analysed conveniently. This has resulted in practical area-wide energy saving projects being proposed and implemented.     

Broadband semi‐parametric estimation of long‐memory time series by fractional exponential models

This article proposes broadband semi‐parametric estimation of a long‐memory parameter by fractional exponential (FEXP) models. We construct the truncated Whittle likelihood based on FEXP models in a semi‐parametric setting to estimate the parameter and show that the proposed estimator is more efficient than the FEXP estimator by Moulines and Soulier (1999) in linear processes. A Monte Carlo simulation suggests that the proposed estimation is more preferable than the existing broadband semi‐parametric estimation.     

Improvement of the photostability for YVO4:Bi,Eu nanoparticles synthesized by the citrate route

YVO₄:Bi³⁺,Eu³⁺ nanophosphor synthesized by the citrate route shows the photobleaching behavior, i.e., the decrease in photoluminescence intensity under the continuous irradiation of excitation light. This photobleaching property is remarkably suppressed by the washing post-treatment combined with centrifugation and the hydrothermal post-treatment. A relation between the fraction of photobleach and the amount of citrate ions coordinating to metallic ions at the surface of nanoparticles verifies that the photobleaching behavior of YVO₄:Bi³⁺,Eu³⁺ nanophosphor originates from the redox reaction between the citrate ions and V⁵⁺ in YVO₄ host crystal. The long-term light fastness test reveals that the hydrothermally treated YVO₄:Bi³⁺,Eu³⁺ nanophosphor has sufficient photostability for practical use over 15 years outside.     

High-Performance Induction Motor Drive System Using a PWM Inverter

A high-performance speed control system for cage induction motors is described which utilizes a PWM inverter. The effects of primary current coincidence and machine constant variation on system characteristics such as response time, torque precision, and operating noise were investigated. Based on the results obtained, new control methods have been devised; one varies the gain of the current controller in proportion to the primary frequency, and a second compensates for the slip frequency by using the deviation between the flux reference value and the actual value. Effectiveness of the compensation methods was confirmed in tests.     

Numerical analysis of plasmon-resonance absorption in bisinusoidal metal gratings

We numerically investigate plasmon-resonance absorption of incident light energy by a bisinusoidal metal grating, i.e., one whose surface profile is sinusoidally corrugated in two orthogonal directions with a common period. Employing Yasuura's modal expansion method, we solve the problem of plane-wave diffraction by the grating and evaluate the absorption, which is observed as dips in diffraction efficiency curves. We examine the field distribution and energy flow in detail at the angles of incidence at which the absorption occurs. We show that the absorption is caused by coupling of the TM component of an evanescent order with surface plasmons. A phase-matching condition is used in the prediction of the incident angle at which the absorption occurs. This, together with the field profile in the presence of the resonance absorption, explains the mechanism of the absorption. We then illustrate interesting features of the absorption: enhancement of polarization conversion between the incident light and the reflected light and simultaneous excitation of two plasmon waves in directions that are symmetric with respect to the plane of incidence.     

Selective and in-situ determination of carbonate and oxide particles in aqueous solution using laser-induced breakdown spectroscopy (LIBS) for wearable information equipment

Laser-induced breakdown spectroscopy (LIBS) has been applied for quantitative analysis of Al₂O₃, CaCO₃ and MgO particles suspended in water. In the single elemental system, the plasma emission intensities of Al, Ca and Mg were linearly increased with concentration of elements in the range of 1.0×10^?5–1.0×10^?3  M, 1.0×10^?4–2.0×10^?3 M and 8.0×10^?5 –4.0×10^?3 M, respectively. We also investigated the concentration dependence of breakdown spectra for suspended mixtures of Al₂O₃, CaCO₃ and MgO particles. The emission lines, such as Al I, Ca I, Ca II and Mg I, were appeared in the LIBS spectrum simultaneously, and each emission peak could be deconvoluted. The plasma emission intensities of Al, Ca and Mg in the multielemental system were also linearly increased with their concentrations in the range of 1.0×10^?5–1.0×10^?3 M, 1.0×10^?4–2.0×10^?3 M and 4.0×10^?4–2.0×10^?3 M, respectively. LIBS was found to be available for quantitative and qualitative measurement of the concentrations of Al₂O₃, CaCO₃ and MgO particles suspended in water. The present results suggest that LIBS is a potentially useful tool for in-situ analysis on particles composition and concentrations for environmental monitoring by the wearable information equipments.     

Aggregate formation of rCHO cells and its maintenance in repeated batch culture in the absence of cell adhesion materials

Aggregate formation of recombinant Chinese hamster ovary (rCHO) cells capable of producing granulocyte colony-stimulating factor (G-CSF), using medium lacking cell adhesion materials in a repeated batch culture, was examined together with cell growth, cell viability and G-CSF production. The rCHO culture was conducted in a rotary shaker and the medium was changed every five days. The formation of stable cell aggregates with high reproducibility was observed after the first medium change. The size of the cell aggregates (consisting of several 10s to 40,000 cells) formed during the repeated batch culture ranged from 30 to 600 microm. The cell density of the aggregates reached as high as 2 x 10(6) cells/ml and the viability was maintained at more than 80% for 19 d. Changing the medium to avoid glucose exhaustion effectively maintained the cell density, cell viability and G-CSF productivity at high levels.