Water mist formation in vapor-mist dielectrics and its effect

It has been proposed that vapor-mist dielectrics in which mixing liquid droplets such as tetrachloroethlene in a gas have the ability of increasing flashover, impulse voltage, and of suppressing partial discharge. Vapor-mist methods have been performed on other materials and the effect of the mist can also be obtained on benzene, hexane, and even water as general materials. Although these studies have been carried out, neither the discharge mechanism on vapor-mist nor the reason for the increase of the discharge voltage is understood fully because the mist is of various sizes. On the other hand, agglomeration of water molecules can be studied with the FR-IR method, and are classified into monomer, dimer, trimer (including polymer). Water gives mist stats which are significant in discussing effects. This paper describes states of water mist and their effect under nonuniform field with positive and negative polarities. Water mist in vapor exists as dimer and trimer, and their amount decreases with the reduction of temperature. These mists have no effect on discharge suppression. However, when the mists are formed by space charges, the inception voltage is increased by these mists in the negative polarity.     

Prediction of the capacity of a heat exchanger by a thermal network method: Modified effective specific heat model considering the influence of static pressure distributions of refrigerants

In this paper, we proposed a method to predict the capacity of a heat exchanger by considering static pressure distributions of refrigerants. The thermal network method was modified by adding an equivalent heat generation term into a heat balance equation that was connected with calculated 1D static pressure distributions of refrigerants. An experiment was performed with a heat exchanger having two rows and two passes to verify the accuracy of the proposed method. The result showed the error of the predicted capacity to be less than 1% for an evaporator and less than 2% for a condenser. © 2002 Wiley Periodicals, Inc. Heat Trans Asian Res, 31(5): 376–390, 2002; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/htj.10039     

Adjuvant intra-arterial chemotherapy with gastrin receptor antagonist after hepatic resection in colorectal cancer metastasis

The aim of this study was to determine whether chemo-endocrine therapy after the resection of liver metastasis from colorectal cancer would prevent recurrence in the remnant liver and prolong survival. Eleven colorectal cancer patients underwent hepatic resection for liver metastasis. Subsequently, they were administered Proglumide gastrin antagonist 1,200 mg/day + 5'-DFUR 800 mg/day for 2 years. In seven of them, MMC 6-10 mg and ADM 20 mg were infused intra-arterially every two weeks alternately for one year. In four of them, 5-FU 250 mg/day was infused for seven days continuously intra-arterially every two weeks for one year. Recurrence in the remnant liver occurred in four of 11 patients. All of these patients underwent repeated hepatectomy. The mean disease-free survival in the remnant liver was 37 months and the five-year survival rate was 91%. These results indicate that intra-arterial chemotherapy with gastrin receptor antagonist might be effective for adjuvant therapy in patients with resectable liver metastasis from colorectal cancer.     

Elimination of artifacts in MRCP: technical consideration

Artifacts of MR cholangiopancreatography (MRCP) include fluid-filled gastrointestinal tracts, respiratory motion artifacts, spasm of Oddi's sphincter, vascular compression of bile ducts, overlapping of various anatomical structures and bright signal of surrounding fatty tissue. In this article, various technical considerations to eliminate these artifacts were described for the better imaging analysis of MRCP. The use of high-concentration ferric ammonium citrate (Ferriseltz) is recommended to reduce bright signal of fluid-filled gastrointestinal tracts. In case of long breathhold sequences, O2-inhalation study is useful to eliminate respiratory motion artifacts. Careful attention should be paid to the spasm of Oddi's sphincter and the vascular compression of bile ducts to avoid erroneous interpretation of MRCP findings.     

Low-threshold and high temperature single-longitudinal-mode operation of 1.55 ?m-band DFB-DC-PBH LDs

1.55 ?m-band distributed-feedback laser diodes with double-channel planar buried heterostructure (DFB-DC-PBH LDs) have been developed. As well as low threshold current, 19 mA at room temperature, stable CW single-longitudinal-mode operation up to the high power level of 23 mW and the high temperature of 108°C has been obtained.     

A method for motion compensation of a moving nematode Caenorhabditis elegans and its application to frequency analysis of pharyngeal pulsation

A new sequential image processing method for motion compensation of a moving object with stringy shape has been developed for estimating the pharyngeal pulsation of the nematode Caenorhabditis elegans under several environmental conditions. The method is based on the pixel data transfer on a new image frame while changing the boundary shape and the position but preserving the conformation of the inner structure of an object. All digitized image frames of C. elegans were first converted to motion-compensated images to arrange the pulsation site in the same region of the every transformed frame. The pulsation site was then automatically detected by determining the pixels where the temporal brightness variation was much larger than that of the other pixels. Finally, the pulsation frequency was determined by the Fourier analysis. The validity of our method has been confirmed by analyzing various test data, and the method has been applied for detecting the pharyngeal pulsation frequencies of C. elegans on some environmental conditions, i.e. feed bacteria-free/rich, doping of nerve inactivating ethyl-alcohol and nerve stimulant neurochemical substance of serotonin. The motion compensation method automatically provided reasonable pulsation frequencies which were found to be comparable to those obtained by manual counting. Thus the method is useful for systematic investigations on the variation of pharyngeal pulsation associated with the activity change of the nervous system in environments.     

A new approach to species determination for yeast strains: DNA microarray-based comparative genomic hybridization using a yeast DNA microarray with 6000 genes

DNA-DNA hybridization is known as the superior method in the elucidation of relationships between closely related taxa, such as species and strain. For species determination we propose a new DNA-DNA hybridization method: the DNA microarray-based comparative genomic hybridization (CGH) method, using a yeast DNA microarray with approximately 6000 genes. The genome from a yeast strain as a sample strain (Sample) was labelled with Cy3-dye and hybridized to a single DNA microarray, together with the Cy5-labelled genome of S. cerevisiae S288C as a reference strain (Reference). The log2 ratio values [log2[Cy3(Sample)/Cy5(Reference)]: Ratio] of signal intensities of all the gene spots were estimated and divided into the following groups: Ratio < or = -1; -1 < Ratio < 1; 1 < or = Ratio. The hybridization profiles of the genomes of type strains belonging to the genus Saccharomyces were significantly different from that of S. cerevisiae S288C. The Ratio-based grouping allowed us to discriminate between some species from S. cerevisiae more clearly. Furthermore, cluster analysis discriminated between closely related species and strains. Using this method, we were able to not only perform species determination but also to obtain information on alternation in gene copy number of such gene amplifications and deletions with single-gene resolution. These observations indicated that DNA microarray-based CGH is a powerful system for species determination and comparative genome analysis.     

Effect of reaction pH on the photodegradation of model melanoidins

The effect was studied of the pH of the amino-carbonyl reaction on the photodegradation of model melanoidins. Nondialyzable model melanoidins were prepared from glucose and lysine with or without initial pH control to 7.0.: 2 mol/l phosphate buffer (buffer-melanoidin) and pH adjustment at the reaction start with NaHCO₃ (NaHCO₃-melanoidin). Melanoidin was also prepared from glucose and the lysine-Cu²⁺complex to investigate the difference of complexes between melanoidin and Cu²⁺ (Cu²⁺-melanoidin). Each melanoidin solution was irradiated with a Xe or tungsten-halogen lamp under dissolved oxygen or by the continuous supply of oxygen in a Cu²⁺/O₂ or ascorbic acid/Cu²⁺/O₂ system. The effects of the concentrations of Cu²⁺ and melanoidin, reaction pH value, and metal ion species on the decolorization rate in the Cu²⁺/O₂ system were investigated. The most effective factor for decolorization was found to be the melanoidin concentration. The decolorization rate was negligible when 14 g/l of Cu²⁺-melanoidin was photodegraded in the ascorbic acid/Cu²⁺/O₂ system under dissolved oxygen, although depolymerization was observed. Photodegradation of NaHCO₃-melanoidins in the Cu²⁺/O₂ system by the continuous supply of oxygen resulted in an increased decolorization rate, decreased molecular mass, production of low-molecular-weight compounds, release of free lysine, and pI change. The buffer- and Cu²⁺-melanoidins did not show changes in chemical characteristics similar to those of the NaHCO₃-melanoidin.     

A new learning method using prior information of neural networks

In this paper, we present a new learning method using prior information for three-layered neural networks. Usually when neural networks are used for identification of systems, all of their weights are trained independently, without considering their interrelation of weight values. Thus the training results are not usually good. The reason for this is that each parameter has its influence on others during the learning. To overcome this problem, first, we give an exact mathematical equation that describes the relation between weight values given by a set of data conveying prior information. Then we present a new learning method that trains a part of the weights and calculates the others by using these exact mathematical equations. In almost all cases, this method keeps prior information given by a mathematical structure exactly during the learning. In addition, a learning method using prior information expressed by inequality is also presented. In any case, the degree of freedom of networks (the number of