In Situ Observation of Phase Separation of a Barium Borate Melt in a Stable Immiscibility Region under Microgravity

The precipitation of droplets was directly observed on a BaO–B₂O₃ melt in a drop shaft experiment. This is the first time that precipitation of droplets has been observed in a 4.5 s drop test. The melt film of 4BaOz96B₂O₃ (mol%) held on a platinum wire loop was heated above the critical tem-perature to produce uniformity and was cooled down to the phase separation temperature range. Phase separation of the melt was observed directly with a video camera. The IR image of the melt was simultaneously detected with a CCD array and was converted into a two-dimensional thermograph.     

Decomposition of chlorofluorocarbons on TiO2ZrO2

The decomposition of chlorofluorocarbons (CFCs) in the presence of water was examined over a variety of solid acid catalysts. The TiO₂ZrO₂ catalyst was found to have the highest activity and longest life among the catalysts examined. The activity of the TiO₂ZrO₂ catalysts depended upon the content of TiO₂. At the contents of TiO₂ from 58 to 90 mole%, the TiO₂ZrO₂ catalysts exhibited high activity, and these catalysts were proven to contain TiZrO₄ crystal. From the study of the XRD peak intensity of the TiZrO₄ crystal, it was highest on the TZ-58 which contained 58 mole% of TiO₂, and decreased with increasing the content of TiO₂. Furthermore, the conversion of CFC113 measured at 673 K was highest at TZ-58, and decreased gradually with increasing TiO₂ content. Therefore, the TiZrO₄ crystal influences the activity of decomposition of CFC113. However, the TiO₂ZrO₂ catalyst was gradually deactivated during the reaction due to the elimination of titanium atoms. A good relationship was found between the activity on TiO₂ZrO₂ catalyst and bond energy of CCl in the compounds of chlorofluorocarbons and hydrochlorocarbons, suggesting that the rate controlling step was the cleavage of CCl bond.     

Effect of cell structure on oil absorption of highly oil absorptive polyurethane foam for on-site use

This article reports the effect of cell structure on oil absorption of highly oil-absorptive polyurethane foam (ON-PUR), which is suitable for on-site foaming. We have developed ON-PUR as an oil absorbing polyurethane foam using a very reactive recipe. ON-PUR was synthesized by mixing polyol, water, additives, and polymeric diphenylmethane diisocyanate (P-MDI) using a high-pressure foaming machine. Density, airflow, oil absorption of this foam, and cell structure by microscopy were measured. From these results, it was found that the airflow of this foam increased by crushing, and the oil absorption of this foam increased sharply in a narrow airflow range (from 0.1 to 0.8 scfm). This increase is estimated to be due to the decrease of closed cell structures by crushing treatment. Furthermore, we constituted on-site foaming system in bench scale, which was expected to be applicable to on-site preparation of ON-PUR. © 1997 John Wiley & Sons, Inc. J Appl Polym Sci 65: 179–186, 1997     

Preparation and properties of biocomposites composed of sorbitol‐based epoxy resin,pyrogallol–vanillin calixarene,and wood flour

The reaction of pyrogallol (PG) and vanillin (VN), both of which are derived from plant resources, in the presence of p‐toluenesulfonic acid gave PG–VN calixarene (PGVNC) mainly composed of guaiacyl pyrogallol[4]arene. After sorbitol polyglycidyl ether (SPE) was mixed with PGVNC in tetrahydrofuran at an optimized epoxy/hydroxy ratio 1/2.65, the obtained SPE/PGVNC solution was mixed with wood flour (WF), prepolymerized at 150°C, and subsequently compressed at 190°C for 3 h to give SPE–PGVNC/WF biocomposites with WF content 0–20 wt%. The tan δ peak temperature of SPE–PGVNC was 148.1°C, which was much higher than that of the SPE cured with petroleum‐based phenol novolac (SPE–PN) at an optimized epoxy/hydroxy ratio 1/1. Although tan δ peak temperature slightly decreased with increasing WF content, the storage moduli of the SPE–PGVNC/WF biocomposites in the rubbery state at more than 150°C were much higher than those of SPE–PGVNC and SPE–PN. Also, the tensile modulus and strength for SPE–PGVNC/WF increased with increasing WF content. Field emission‐scanning electron microscopy analysis of the biocomposites revealed that WF is tightly incorporated into the crosslinked epoxy resins. POLYM. COMPOS., 2012. © 2012 Society of Plastics Engineers     

Pregnancy by Assisted Reproductive Technology Is Associated with Shorter Telomere Length in Neonates

Telomere length (TL) influences the development of lifestyle-related diseases, and neonatal TL may influence their prevalence. Various factors have been reported to affect neonatal TL. Although the fetus is exposed to multiple conditions in utero, the main factors affecting the shortening of neonatal TL are still not known. In this study, we sought to identify factors that influence fetal TL. A total of 578 mother-newborn pairs were included for TL analysis. TL was measured in genomic DNA extracted from cord blood samples using quantitative PCR. The clinical factors examined at enrollment included the following intrauterine environmental factors: maternal age, assisted reproductive technology (ART) used, body mass index (BMI), gestational diabetes mellitus (GDM), maternal stress, smoking, alcohol consumption, preterm delivery, small-for-gestational-age, neonatal sex, and placental weight. Univariate and multivariate regression analyses were used to verify the relationship between neonatal TL and these clinical factors. The median neonatal TL to single-copy gene ratio was 1.0. Pregnancy with ART was among the 11 factors associated with shorter neonatal TL. From multiple regression analysis, we determined that neonatal TL was significantly shorter for pregnancies in the ART group than in the other groups. We conclude that pregnancy with ART is associated with shorter neonatal TL.     

Enhancing low-temperature energy harvesting by lead-free ferroelectric Ba(Zr0.1Ti0.9)O3

The energy-harvesting ability of the lead-free ferroelectric Ba(Zr,Ti)O₃ was investigated and greatly enhanced using the Kim novel electrothermodynamic cycle for low-temperature application. Ba(Zr,Ti)O₃ was synthesized with a Zr:Ti ratio of 10:90 (BZT10) by hot-press sintering, which exhibited a mix relaxor-ferroelectric behavior. For power generation using the Kim cycle with low and high temperatures of T_L = 25°C, T_H = 120°C, the most optimized temperature pattern occurred for a heating time of 12.5 s and a cooling time of 22.5 s. Under these conditions, the electric field increased during the novel isodisplacement process, and the displacement variation in the isoelectric step reached the highest value and maximized the BZT10 cycle loop area. Applying these conditions while lowering T_L to 20°C, an energy density N_D = 504 mJ/cm³ was achieved. This value is the highest obtained energy density in a practical test for lead-free ferroelectric bulk material in the BaTiO₃ family.     

Potential bile acid metabolites. 24. An efficient synthesis of carboxyl-linked glucosides and their chemical properties

A facile and efficient synthesis of the carboxyl-linked glucosides of bile acids is described. Direct esterification of unprotected bile acids with 2,3,4,6-tetra-O-benzyl-d-glucopyranose in pyridine in the presence of 2-chloro-1,3,5-trinitrobenzene as a coupling agent afforded a mixture of the α- and β-anomers (ca. 1∶3) of the 1-O-acyl-d-glucoside benzyl ethers of bile acids, which was separated effectively on a C₁₈ reversedphase chromatography column (isolated yields of α- and β-anomers are 4–9% and 12–19%, respectively). Subsequent hydrogenolysis of the α- and β-acyl glucoside benzyl ethers on a 10% Pd−C catalyst in acetic acid/methanol/EtOAc (1∶2∶2, by vol) at 35°C under atmospheric pressure gave the corresponding free esters in good yields (79–89%). Chemical specificities such as facile hydrolysis and transesterification of the acyl glucosides in various solvents were also discussed.     

Controlling the familywise error rate in functional neuroimaging: a comparative review

Functional neuroimaging data embodies a massive multiple testing problem, where 100,000 correlated test statistics must be assessed. The familywise error rate, the chance of any false positives is the standard measure of Type I errors in multiple testing. In this paper we review and evaluate three approaches to thresholding images of test statistics: Bonferroni, random field and the permutation test. Owing to recent developments, improved Bonferroni procedures, such as Hochberg's methods, are now applicable to dependent data. Continuous random field methods use the smoothness of the image to adapt to the severity of the multiple testing problem. Also, increased computing power has made both permutation and bootstrap methods applicable to functional neuroimaging. We evaluate these approaches on t images using simulations and a collection of real datasets. We find that Bonferroni-related tests offer little improvement over Bonferroni, while the permutation method offers substantial improvement over the random field method for low smoothness and low degrees of freedom. We also show the limitations of trying to find an equivalent number of independent tests for an image of correlated test statistics.     

Effects of ultrasonic irradiation on crystallization behavior of tripalmitoylglycerol and cocoa butter

Effects of application of ultrasonic power (20 kHz, 100 W) on the crystallization behavior of tripalmitoylglycerol (PPP) and cocoa butter have been examined in terms of rate of nucleation and polymorphic control. High-purity PPP (>99%) and low-purity PPP (>80%) samples were employed to mimic real fat systems, which usually have higher concentrations of minor components in addition to the main component. For both the high-purity and low-purity PPP, the application of ultrasonic power accelerated the rate of nucleation as measured by induction time for the occurrence of crystals and by the number of crystals nucleated. As for the polymorphic influences, the nucleation of both the β′ and β forms was accelerated by the ultrasound, yet the β′ form nucleation was more accelerated when the low-purity PPP samples were employed. As for cocoa butter, sonication for a short period accelerated the crystallization of Form V. The present results indicate that ultrasound irradiation is an efficient tool for controlling polymorphic crystallization of fats.