Focal calcium monitoring with targeted nanosensors at the cytosolic side of endoplasmic reticulum

Ca²⁺ distribution is spatially and temporally non-uniform inside cells due to cellular compartmentalization. However, Ca²⁺ sensing with small organic dyes, such as fura-2 and fluo-4, has been practically applied at a single cell level where the averaged signal from freely diffusing dye molecules is acquired. In this study, we aimed to target azide-functionalized fura-2 (N₃-fura-2) to a specific site of subcellular compartments to realize focal Ca²⁺ sensing. Using scAVD (single-chain avidin)–biotin interaction and a copper-free click reaction system, we linked N₃-fura-2 to specifically-targeted scAVD protein fused with a red fluorescent protein mCherry, so that Ca²⁺ sensors conjugated with four N₃-fura-2 dyes with dibenzocyclooctyne (DBCO)-PEG4-biotin as a linker were generated at subcellular compartments in living cells. In cytoplasm, N₃-fura-2 showed a prolonged retention period after binding to scAVD. Furthermore, the reacted N₃-fura-2 was retained inside cells even after free dyes were washed out by methanol fixation. When scAVD was overexpressed on endoplasmic reticulum (ER) membranes, N₃-fura-2 was accumulated on ER membranes. Upon histamine stimulation, which increases cytosolic Ca²⁺ concentration, ER-localized N₃-fura-2 successfully sensed the Ca²⁺ level changes at the cytosolic side of ER membrane. Our study demonstrated specific targeting of N₃-fura-2 to subcellular compartments and the ability of sensing focal Ca²⁺ level changes with the specifically targeted Ca²⁺ sensors.     

Superior electrocatalytic activity of mesoporous Au film templated from diblock copolymer micelles

Mesoporous Au films consisting of a network of interconnected Au ligaments around ultra-large pores were found to exhibit a promising electrocatalytic activity towards sluggish reactions. Mesoporous Au films with pore sizes up to 25 nm were successfully fabricated using a polymeric micelle approach. A superior catalytic activity of the mesoporous Au films towards methanol oxidation was confirmed, which was thoroughly analyzed and compared with that of other Au materials. An intrinsic investigation on the high catalytic activity revealed that the superior performance of the as-prepared mesoporous Au film was related to its unique atomic structures around the mesopores with well-crystallized facets and several step/kink sites on the Au surfaces. These findings showcase a strategic and feasible design for preparing highly active Au-based catalysts that could be used as promising candidates in electrocatalytic applications.

Open image in new window

     

Out‐of‐Plane Strain Induced in a Moiré Superstructure of Monolayer MoS2 and MoSe2 on Au(111)

Making contact of transition metal dichalcogenides (TMDCs) with a metal surface is essential for fabricating and designing electronic devices and catalytic systems. It also generates strain in the TMDCs that plays significant role in both electronic and phonon structures. Therefore, detailed understanding of mechanism of the strain generation is important to fully comprehend the modulation effect for the electronic and phonon properties. Here, MoS₂ and MoSe₂ monolayers are grown on Au surface by chemical vapor deposition and it is demonstrated that the contact with a crystalline Au(111) surface gives rise to only out‐of‐plane strain in both MoS₂ and MoSe₂ layers, whereas no strain generation is observed on polycrystalline Au or SiO₂/Si surfaces. Scanning tunneling microscopy analysis provides information regarding consequent specific adsorption sites between lower S (Se) atoms in the S? Mo? S (Se? Mo? Se) structure and Au atoms via unique moiré superstructure formation for MoS₂ and MoSe₂ layers on Au(111). This observation indicates that the specific adsorption sites give rise to out‐of‐plane strain in the TMDC layers. Furthermore, it also leads to effective modulation of the electronic structure of the MoS₂ or MoSe₂ layer.     

ARSlice: Head-Mounted Display Augmented with Dynamic Tracking and Projection

Computed tomography (CT) generates cross-sectional images of the body. Visualizing CT images has been a challenging problem. The emergence of the augmented and virtual reality technology has provided promising solutions. However, existing solutions suffer from tethered display or wireless transmission latency. In this paper, we present ARSlice, a proof-of-concept prototype that can visualize CT images in an untethered manner without wireless transmission latency. Our ARSlice prototype consists of two parts, the user end and the projector end. By employing dynamic tracking and projection, the projector end can track the user-end equipment and project CT images onto it in real time. The user-end equipment is responsible for displaying these CT images into the 3D space. Its main feature is that the user-end equipment is a pure optical device with light weight, low cost, and no energy consumption. Our experiments demonstrate that our ARSlice prototype provides part of six degrees of freedom for the user, and a high frame rate. By interactively visualizing CT images into the 3D space, our ARSlice prototype can help untrained users better understand that CT images are slices of a body.     

Design and analysis of a pneumatic high-impact force drive mechanism for in-pipe inspection robots

A pneumatic actuator is suitable and safe for in-pipe inspection robots in inflammable circumstances because of its ability to withstand explosions. However, ordinary pneumatic actuators limit driving speed because of their slow response. In this paper, we propose a novel pneumatic drive mechanism that can produce a high-impact force to move the in-pipe robot forward with sufficient speed by a catastrophic phenomenon using rapid release between a magnet and springs. We also introduce an anisotropic friction mechanism that uses a self-locking phenomenon to transmit the impact force to the pipe walls efficiently. A pin retraction mechanism that releases the self-locking condition is applied to retrieve the robot from the pipes. Optimizations of the proposed design were conducted based on a motion simulation model and verified in experiments. The experimental results obtained for maximum driving speeds in a straight pipe with different material types were approximately 90 and 50 mm/s for horizontal and vertical pipes, respectively. Stable strokes were also observed at different driving frequencies from 0.5 to 2.0 Hz.     

Molecular and Genetic Interactions between CCN2 and CCN3 behind Their Yin–Yang Collaboration

Cellular communication network factor (CCN) 2 and 3 are the members of the CCN family that conduct the harmonized development of a variety of tissues and organs under interaction with multiple biomolecules in the microenvironment. Despite their striking structural similarities, these two members show contrastive molecular functions as well as temporospatial emergence in living tissues. Typically, CCN2 promotes cell growth, whereas CCN3 restrains it. Where CCN2 is produced, CCN3 disappears. Nevertheless, these two proteins collaborate together to execute their mission in a yin–yang fashion. The apparent functional counteractions of CCN2 and CCN3 can be ascribed to their direct molecular interaction and interference over the cofactors that are shared by the two. Recent studies have revealed the mutual negative regulation systems between CCN2 and CCN3. Moreover, the simultaneous and bidirectional regulatory system of CCN2 and CCN3 is also being clarified. It is of particular note that these regulations were found to be closely associated with glycolysis, a fundamental procedure of energy metabolism. Here, the molecular interplay and metabolic gene regulation that enable the yin–yang collaboration of CCN2 and CCN3 typically found in cartilage development/regeneration and fibrosis are described.     

Elevated Alpha 1(I) to Alpha 2(I) Collagen Ratio in Dermal Fibroblasts Possibly Contributes to Fibrosis in Systemic Sclerosis

Systemic sclerosis (SSc) is characterized by excessive collagen deposition in the skin and internal organs. Activated fibroblasts are the key effector cells for the overproduction of type I collagen, which comprises the α1(I) and α2(I) chains encoded by COL1A1 and COL1A2, respectively. In this study, we examined the expression patterns of α1(I) and α2(I) collagen in SSc fibroblasts, as well as their co-regulation with each other. The relative expression ratio of COL1A1 to COL1A2 in SSc fibroblasts was significantly higher than that in control fibroblasts. The same result was observed for type I collagen protein levels, indicating that α2(I) collagen is more elevated than α2(I) collagen. Inhibition or overexpression of α1(I) collagen in control fibroblasts affected the α2(I) collagen levels, suggesting that α1(I) collagen might act as an upstream regulator of α2(I) collagen. The local injection of COL1A1 small interfering RNA in a bleomycin-induced SSc mouse model was found to attenuate skin fibrosis. Overall, our data indicate that α2(I) collagen is a potent regulator of type I collagen in SSc; further investigations of the overall regulatory mechanisms of type I collagen may help understand the aberrant collagen metabolism in SSc.     

Iron–Nitrogen‐Doped Vertically Aligned Carbon Nanotube Electrocatalyst for the Oxygen Reduction Reaction

A highly active iron–nitrogen‐doped carbon nanotube catalyst for the oxygen reduction reaction (ORR) is produced by employing vertically aligned carbon nanotubes (VA‐CNT) with a high specific surface area and iron(II) phthalocyanine (FePc) molecules. Pyrolyzing the composite easily transforms the adsorbed FePc molecules into a large number of iron coordinated nitrogen functionalized nanographene (Fe–N–C) structures, which serve as ORR active sites on the individual VA‐CNT surfaces. The catalyst exhibits a high ORR activity, with onset and half‐wave potentials of 0.97 and 0.79 V, respectively, versus reversible hydrogen electrode, a high selectivity of above 3.92 electron transfer number, and a high electrochemical durability, with a 17 mV negative shift of E _1/2 after 10 000 cycles in an oxygen‐saturated 0.5 m H₂SO₄ solution. The catalyst demonstrates one of the highest ORR performances in previously reported any‐nanotube‐based catalysts in acid media. The excellent ORR performance can be attributed to the formation of a greater number of catalytically active Fe–N–C centers and their dense immobilization on individual tubes, in addition to more efficient mass transport due to the mesoporous nature of the VA‐CNTs.     

Dynamic Power Integrity Control of ATE for Eliminating Overkills and Underkills in Device Testing

This paper proposes a power integrity control technique for dynamically controlling power supply voltage fluctuations for a device under test (DUT), and demonstrates its effectiveness for eliminating the overkills/underkills due to the difference of power supply impedance between an automatic test equipment (ATE) and a practical operating environment of the DUT. The proposed method injects compensation currents into the power supply nodes on the ATE system in a feed-forward manner such that the ATE power supply waveform matches with the one on the customer’s operating environment of the DUT. A method for calculating the compensation current is also described. Experimental results show that the proposed method can emulate the power supply voltage waveform under a customer’s operating condition and eliminate 95 % of overkills/underkills in the maximum operating frequency testing with 105 real silicon devices. Limitations and applications of the proposed method are also discussed.     

Estimating the creep behavior of polycarbonate with changes in temperature and aging time

Thermoplastic resins are typically used without any kind of physical aging treatment. For such materials, creep behavior and physical aging, which depend on time and temperature, occur simultaneously. The effects of these processes are evident after quenching and are recorded in the material as a thermal history. This history strongly influences mechanical properties and creep behavior in particular. Thus, a more thorough understanding of the physical aging process is desirable. We examined the creep deformation of polycarbonate (PC) to reveal the effects of physical aging on creep behavior. The effects were dependent on both time and temperature. The relationship between physical aging and creep behavior exemplified superposition principles with regard to time and both pre-test aging time and pre-test aging temperature. The superposition principles allowed the calculation of creep deformations at a given temperature; the calculated results were corroborated by experimental data.