Morphological characteristics of flood refugia of cobble-bed vegetation

Periodic flooding alters riverine vegetation community composition; moderate flood disturbance maintains communities at an early seral stage, whereas severe floods may remove entire communities. After disturbance, plants may recolonize riverbeds from refugia.Here, we investigated the morphological characteristics of refugia where riverine plants survived large floods. At three sites, plant communities growing on cobble-bars were surveyed, and the hydraulic characteristics of each site were analyzed. The populations of an indicator plant, Anaphalis margaritacea sub-species yedoensis (Franch. et Savat.) were assessed after major floods in 2004 and 2009. At each survey, the particle size and bed composition were measured, and the critical shear-stress required to move particles at each site was calculated. A one-dimensional flow and the average and local shear-stress at ten different discharges, including that of the largest flood were calculated. The results demonstrate that the A. margaritacea community is maintained at locations where the local shear-stress at peak discharge in large-floods does not exceed a critical value. These conditions were achieved in locations with particular morphological characteristics, where the river is not constrained by levees and is restricted by a downstream narrow-pass; in this reach river width increases with discharge thus limiting the increase in water depth with increasing discharge and allowing the establishment of refugia where plant species may survive large floods.Flooding and reestablishment from refugia maintain a characteristic riverbed community in equilibrium.     

粒子网格混合方法模拟液滴夹带起始点

环状流动的特性对反应堆事故工况分析具有重要意义,本研究基于粒子网格混合方法对这一现象中的液滴夹带起始点问题进行了数值分析,利用网格求解流场,利用粒子模拟液膜及液滴的运动,探讨了气水流动大密度比情况下,不同流动方向,不同流体粘度,不同液膜厚度下的液滴夹带所需的临界气相流速,结果同经典关系式进行了对比,吻合良好．这一方法对于反应堆事故中的两相流动研究具有参考意义．     

A facile synthesis of hydro- and vinyl-functionalized di- and tetrasiloxanes and polyaddition via hydrosilylation

Summary Hydro- and vinyl-bifunctionalized di- or tetrasiloxane were synthesized by degradative cleavage of functional cyclic siloxanes with methyllithium followed by quenching with a functional chlorosilane, or by ring-opening of hexamethylcyclotrisiloxane (D₃) by functional alkyllithium followed by quenching with a functional chlorosilane. These bifunctionalized siloxanes were used as monomers in polyaddition with transition metal catalysts.     

Triglyceride analysis by combined argentation/nonaqueous reversed phase high performance liquid chromatography

Full analysis of triglycerides of natural fats and oils has been investigated by the combination of argentation high performance liquid chromatography (HPLC) with nonaqueous reversed phase (NARP) HPLC. An infrared detector was used in argentation HPLC, because it indicated molar responsibility to all triglycerides. After peak trapping with argentation HPLC, each triglyceride fraction was analyzed with NARP chromatography using the glyceride-selective post-column reactor detector. The results of the analyses of triglycerides of palm oil and cocoa butter by the proposed method agreed well with those reported earlier.     

Chemical response of Picea glehnii seed-epiphytic Penicillium species to Pythium vexans under in vitro competitive conditions for mycelial growth

The potential protection of Picea glehnii seedlings from damping-off by seed-epiphytic Penicillium species was investigated. We studied the chemical response of seed-epiphytic Penicillium species (Pen. cyaneum, Pen. damascenum, and Pen. implicatum) to Pythium vexans, a damping-off fungus, in vitro. Penicillium species were cultured singly or cocultured with Pyt. vexans for 14 or 18 d, and mycelial growth, pH of culture filtrate, antifungal activity of the culture filtrate against Pyt. vexans, and the amount of antifungal compound produced by each Penicillium species, were examined. The filtrate of both the single culture of Penicillium and the coculture of Penicillium and Pyt. vexans showed antifungal activity against Pyt. vexans. In a coculture with Pyt. vexans, Pen. cyaneum produced an antifungal compound (patulin) as in the single culture. Pen. damascenum cocultured with Pyt. vexans produced an antifungal compound (citrinin), as it did in the single culture and in larger amounts on day 10. Pen. implicatum produced two antifungal compounds, frequentin and palitantin, and the ratio of frequentin (with higher antifungal activity than palitantin) to palitantin was higher in the coculture with Pyt. vexans than in the single culture. Our results indicate that these Penicillium species have the ability to produce antifungal compounds and to keep antifungal activity under competitive condition with Pyt. vexans. The chemical response of these Penicillium species to Pyt. vexans may contribute to protect P. glehnii seedlings from damage by Pyt. vexans.     

The use of lifetime functions in the optimization of interventions on existing bridges considering maintenance and failure costs

In the last decade, it became clear that life-cycle cost analysis of existing civil infrastructure must be used to optimally manage the growing number of aging and deteriorating structures. The uncertainties associated with deteriorating structures require the use of probabilistic methods to properly evaluate their lifetime performance. In this paper, the deterioration and the effect of maintenance actions are analyzed considering the performance of existing structures characterized by lifetime functions. These functions allow, in a simple manner, the consideration of the effect of aging on the decrease of the probability of survival of a structure, as well as the effect of maintenance actions. Models for the effects of proactive and reactive preventive maintenance, and essential maintenance actions are presented. Since the probability of failure is different from zero during the entire service life of a deteriorating structure and depends strongly on the maintenance strategy, the cost of failure is included in this analysis. The failure of one component in a structure does not usually lead to failure of the structure and, as a result, the safety of existing structures must be analyzed using a system reliability framework. The optimization consists of minimizing the sum of the cumulative maintenance and expected failure cost during the prescribed time horizon. Two examples of application of the proposed methodology are presented. In the first example, the sum of the maintenance and failure costs of a bridge in Colorado is minimized considering essential maintenance only and a fixed minimum acceptable probability of failure. In the second example, the expected lifetime cost, including maintenance and expected failure costs, of a multi-girder bridge is minimized considering reactive preventive maintenance actions.     

Comparison between SiO2 films deposited by atomic layer deposition with SiH2[N(CH3)2]2 and SiH[N(CH3)2]3 precursors

Thin SiO₂ layers were deposited by atomic layer deposition (ALD) using either Bis-dimethylamino-silane (BDMAS: SiH₂(N(CH₃)₂)₂) or Tris-dimethylamino-silane (TDMAS: SiH(N(CH₃)₂)₃) precursors. The purpose of this study is to evaluate these precursors for their suitability for ALD of hafnium (Hf)-silicate gate dielectrics. The advantages of these precursors are that the melting points and vapor pressures are moderate. The thickness of SiO₂ deposited using ALD process is controlled by the number of growth cycles and the growth rate was different for each precursor, that for BDMAS being 1.5 times that for TDMAS at the same reactor pressure. The carbon impurity in the SiO₂ film deposited using BDMAS was about half an order of magnitude less than that using for TDMAS. Furthermore, the carbon impurity was reduced to about the detection limit of secondary ion mass spectrometry after high temperature annealing at 1000 °C during 5 s.     

Carrier Transport and Optical Properties of InGaN SQW With Embedded AlGaN$delta$-Layer

We investigate the carrier transport and optical properties of a thick InGaN single quantum well (SQW) where an AlGaN delta-layer is embedded. By way of simulation, it is found that the carrier density distribution in the active region is more uniform in such a QW structure, compared to a double QW (DQW) configuration showing a discontinuity in the hole quasi-Fermi level due to the large effective mass of the holes along with the strong piezoelectric field. Through the photoluminescence (PL) measurements, we have shown that the PL peak energy varies depending sensitively on the delta-layer thickness, providing an extra degree of freedom in the wavelength-tuning control. In particular, such a QW structure is highly desired for long-wavelength emission as the wavelength tuning can be achieved with lower indium composition. The embedded delta-layer also increases the wave function overlap between holes and electrons, thereby shortening the PL lifetime. The results of PL measurements are shown to be consistent with the self-consistent numerical results. A possible application of the proposed QW structure is to the design of long-wavelength light-emitting diodes and laser diodes     

Theory of Three-Dimensional Discontinuous Deformation Analysis and Its Application to a Slope Toppling at Amatoribashi, Japan

A three-dimensional (3D) rock slope toppling occurred in a discontinuous rock mass. To simulate the failure process and study the mechanism of this rock failure with contact and large displacement in 3D, a new discrete numerical method has been developed called the 3D discontinuous deformation analysis (DDA). This article first introduces the basic principles and then derives the formulas in detail. Finally, the slope failure simulation is applied as an example to investigate the applicability of this new method to rock slope failure research. The simulation results indicate the advantages of using this new method to study the mechanism of a rock slope failure with 3D behavior.     

Development of specimen and test method for strength analysis of MEMS micromirror

Specimens and fracture test methods for strength analysis of MEMS micromirrors were proposed. Bending and combined loading tests were performed, and torsion strength was estimated from those results. Two-parameter Weibull distribution was used to evaluate the fracture stresses estimated from the FEM model. The resulting scale and shape parameters were 787 MPa and 7.77 for the bending test and 517 MPa and 5.28 for the combined loading test. There was a difference in strength between the results of the bending and combined loading tests. From the load factor analysis, it was found that both geometry and stress distribution have to be considered to estimate the strength of MEMS since flaws are non-uniformly distributed. It was also found that torsional strength can be estimated on the safe side using the results of the combined loading test.