Dipeptidyl peptidase IV from porcine seminal plasma: purification, characterization, and N-terminal amino acid sequence

Dipeptidyl peptidase IV (DPP IV) was purified to homogeneity from porcine seminal plasma by polyacrylamide gel electrophoresis (PAGE). The molecular weight of the purified enzyme was calculated to be approximately 290,000 on PAGE in the absence of sodium dodecyl sulfate (SDS) and 310,000 on Sephacryl S-300 HR column chromatography, and to be 115,000 and 105,000 on SDS-PAGE in the absence and presence of beta-mercaptoethanol. The enzyme is suggested to be composed of three identical subunits. The enzyme rapidly hydrolyzed the substrate Gly-Pro-MCA, and weakly the substrate Lys-Ala-MCA. It was strongly inhibited by diisopropylphosphofluoridate (DFP), and moderately by both phenylmethyl-sulfonyl fluoride (PMSF) and 4-(2-aminoethyl)-benzenesulfonyl fluoride (AEBSF). It was also strongly inhibited by zinc ion. The amino acid sequence of the first 18 residues of the enzyme was Asn-Lys-Gly-Thr-Asp-Asp-Ala-Ala-Ala-Asp-Ser-Arg-Arg- Thr-Tyr-Thr-Leu-Thr-. This sequence was highly homologous to the sequences in the rear of the transmembrane site of human and rat liver DPP IVs and mouse thymus DPP IV. The native DPP IV is suggested to be released into the seminal plasma after the cleavage of the hydrophobic N-terminal domain by chymotrypsin-like or pepsin-like enzymes. Other properties of DPP IV including kinetic parameters, pH stability and heat stability were characterized.     

On-machine measurement of a cylindrical surface with sinusoidal micro-structures by an optical slope sensor

This paper describes the measurement of a cylindrical surface with sinusoidal micro-structures over a large area on a diamond turning machine. The sinusoidal micro-structures, which are fabricated on the periphery surface of a cylinder by the fast tool servo-based diamond turning, are superposition of periodic sine-waves along the cylinder axis and the cylinder circumference with amplitudes of 100 nm and wavelengths of 100 μm, respectively. An optical two-dimensional (2D) slope sensor with a multi-spot light beam is developed for measurement of the 2D local slopes of the sinusoidal micro-structured surface. A cylindrical lens is employed in the sensor for removing the influence of the curvature of the cylinder surface. Experiments of fabrication and measurement of the sinusoidal micro-structured surface on an ultra-precision diamond turning machine are carried out.     

Graded evolution of anisotropic microstructure during sintering from crystal-oriented powder compact

Anisotropic sintering, including shrinkage and grain growth, was examined for c-axis-oriented (Sr,Ca)₂NaNb₅O₁₅ (SCNN) ceramics, which were prepared by colloidal processing under a magnetic field. In the c-axis-oriented SCNN powder compact, shrinkage and grain growth along the c-axis were higher than those along the a-axis. The anisotropic microstructural development was clearly associated with anisotropic sintering shrinkage. X-ray diffraction, scanning electron microscopy, and energy back scattering diffraction showed that the grain growth of oriented particles by including random grains contribute to the development of the oriented microstructure. Finally, the highly crystal-oriented SCNN ceramics with a densified microstructure were obtained through anisotropic sintering. These results clearly showed the potential to develop a well-defined anisotropic microstructure during sintering by designing and controlling the particle packing structure in a powder compact.     

Consideration on the Relationship Between Dielectric Breakdown Voltage and Water Content in Fatty Acid Esters

Mineral oil is commonly used as an electrical insulating oil in transformers because of its relatively high electrical insulating ability and fluidity. Considering the depletion of resources and environmental problems, however, fatty acid esters synthesized from natural plant oils are attracting attention as an environmentally friendly insulating oil. In addition, fatty acid esters such as methyl octanoate, methyl dodecanoate, 2-ethylhexyl octanoate, and 2-ethylhexyl dodecanoate have high fluidity, and also show excellent moisture tolerance against dielectric breakdown compared to mineral oil. In the present study, to clarify the reason for the superior moisture tolerance of fatty acid esters, the status of dissolved water in esters is investigated with IR spectroscopic measurements and density functional theory (DFT) calculations. It is revealed that water molecules in fatty acid esters are trapped by the ester moiety of fatty acid esters. As a result, fatty acid esters have a higher moisture tolerance against dielectric breakdown than mineral oil.     

Biosynthesis of Trehangelin in Polymorphospora rubra K07–0510: Identification of Metabolic Pathway to Angelyl‐CoA

Trehangelins are trehalose angelates discovered from endophytic actinomycete Polymorphospora rubra K07‐0510. We identified the trehangelin biosynthetic gene cluster, including genes that encode a glycoside hydrolase‐like protein (thgC), α‐amylase (thgD), 3‐ketoacyl‐ACP synthase III (thgI), 3‐ketoacyl‐ACP reductase (thgK), enoyl‐CoA hydratase (thgH) and acyl transferase (thgJ). Heterologous expression of thgH, thgI, thgJ and thgK confirmed the importance of these genes in the biosynthesis of trehangelin A. Enzymatic activity studies showed that ThgI catalyses the condensation of acetyl‐CoA and methylmalonyl‐CoA to 2‐methylacetoacetyl‐CoA (MAA‐CoA), ThgK catalyses NADPH‐dependent reduction of MAA‐CoA to 3‐hydroxy‐2‐methylbutyryl‐CoA (HMB‐CoA) and ThgH catalyses the dehydration of HMB‐CoA to angelyl‐CoA (AN‐CoA). This is the first report on the elucidation of the enzymatic formation of AN‐CoA.     

Mass transfer in polycrystalline ytterbium monosilicate under oxygen potential gradients at high temperatures

Mass transfer in polycrystalline Yb₂SiO₅ wafers with precise composition control was evaluated and analyzed by oxygen permeation experiments at high temperatures using an oxygen tracer. Oxygen permeation proceeded due to mutual grain boundary diffusion of oxide ions and Yb ions without synergistic effects such as acceleration or suppression. The oxygen shielding properties of Yb₂SiO₅ were compared with those of the other line compounds such as Yb₂Si₂O₇ and Al₂O₃ based on the determined mass transfer parameters. It was found that the more preferentially an oxide ion diffuses in the grain boundary compared to the interior of the grain, the greater the effect of suppressing the movement of the oxide ion by applying an oxygen potential gradient becomes.     

Effect of matrix's type on the dynamic properties for short fiber-elastomer composite

The dynamic moduli, E′ and E″, and tan δ for PET–CR, PET–EPDM, and PET–UR composites with unidirectional short fibers were studied as a function of temperature by using a Rheovibron. The temperature dependence of tan δ showed three peaks for PET–elastomer composites. The peaks at the low temperature corresponded to the main dispersion of the respective matrixes and the peak at about 140°C to the α-dispersion of PET fiber. A small and broad peak observed at a temperature between 60 and 120°C may be caused by the relaxation of the interface region between fibers and matrix. The longitudinal storage modulus for the composite E was given by the parallel model as \documentclass{article}\pagestyle{empty}\begin{document}$ {\rm E'}_\parallel = V_f \cdot E'_f + V_m \cdot E'_m $\end{document}, where E and E are the storage moduli for fiber and matrix and V_f and V_m are the volume fraction of fiber and matrix, respectively. In the transverse direction of fibers, the composite modulus E was expressed by the logarithmic law of mixing as follows: \documentclass{article}\pagestyle{empty}\begin{document}$ \log E'_ \bot = V_f \cdot \log E'_f + V_m \cdot \log E'_m $\end{document}. The peak values of tan δ from the main dispersion of the respective matrixes were given by the equation, (tan δ_⊥max)_c/(tan δ_max)_m 1 ? β · V_f, where (tan δ_⊥max)_c and (tan δ_max)_m are the maximum values of the loss tangent for the composite and matrix, respectively, and β is coefficient depending on matrix's type. The β value of PET–CR composite is the largest one among those of the composites.     

Characterization of Aspergillus oryzae glycoside hydrolase family 43 β-xylosidase expressed in Escherichia coli

This is the first report of glycoside hydrolase family 43 β-xylosidase from Aspergillus oryzae. To characterize this enzyme, the recombinant enzyme was expressed in Escherichia coli. Unlike known β-xylosidases from fungal origins, the enzyme did not show substrate ambiguity and was stable at alkaline pH.     

Strain selection and scale-up fermentation for FR901379 acylase production by Streptomyces sp. no. 6907

Micafungin (FK463) is a widely used treatment for life-threatening, deep-seated fungal infections. It is an echinocandin-like lipopeptide derived from the chemical modification of deacylated FR901379, a type of lipopeptide antibiotic produced by Coleophoma empetri F-11899. The palmitoyl moiety of FR901379 is deacylated by FR901379 acylase produced by Streptomyces sp. no. 6907. In this study, our goal was to generate an improved strain of Streptomyces sp. no. 6907 capable of hyperproducing the FR901379-acylase enzyme. To accomplish this goal, modified strains of Streptomyces sp. no. 6907 were generated using UV-irradiation mutagenesis, and strain selection was performed using an agar-plate screening method to efficiently select an acylase-hyperproducing strain. Three marker indices were shown to correlate with elevated acylase production: decreased candidacidal activity of FR901379, decreased proteolytic activity on skim milk, and phenotypic characteristics. Cloning and subsequent sequencing of the acylase gene from the hyperproducing mutant revealed no mutations in either the acylase structural gene or the 5'-flanking region required for gene expression. The growth medium was also modified to maximize acylase production. We successfully increased acylase activity approximately 65-fold, compared with the original growth conditions (wild strain cultured in the original unmodified medium). To minimize formation of excess foam during the fermentation process, we optimized the parameters of agitation speed, as calculated from the discharge flow rate. Using our improved strain and the optimized medium and growth conditions, we have developed an improved and highly reproducible method for stable large-scale production of FR901379-acylase.