High precision in Raman frequency achieved using real-time calibration with a neon emission line: application to three-dimensional stress mapping observations

A three-dimensional (3D) Raman mapping system with a real-time calibration function was developed for detecting stress distributions in solid materials from subtle frequency shifts in Raman spectra. An atomic emission line of neon at 918.3 cm(-1) when excited at 514.5 nm was used as a wavenumber standard. An emission spectrum of neon and a Raman spectrum from a sample were introduced into a single polychromator using a bifurcated optical fiber. These two spectra were recorded simultaneously on a charge-coupled device (CCD) detector using double-track mode. Energy deviation induced by the fluctuation of laboratory temperature, etc., was removed effectively using the neon emission line. High stability during long measurements was achieved. By applying curve fitting, positions of the Raman line were determined with precision of about 0.05 cm(-1). The present system was applied to measurements of residual pressure around mineral inclusions in a natural diamond: 3D stress mapping was achieved.     

Supersolidity and Disorder in Solid Helium 4

Supersolidity is a rather controversial issue which has been revived recently by a number of torsional oscillator (ac-rotation) experiments with solid helium 4. One possibility would be that the ground state of helium 4 crystals contains a Bose-Einstein condensate of mobile vacancies. However, the supersolid signal was shown to depend on sample history. In addition, dc-flow experiments show that superfluid transport of mass does not occur in solid helium, except if it contains appropriate grain boundaries. As a consequence, we believe that supersolidity is not an intrinsic property of helium single crystals, but that it is due to quenched disorder. We report experiments on pressure relaxation in and light scattering from solid samples, that give additional evidence for the existence of disorder in helium crystals. We also describe our recent study of the wetting properties of grain boundaries.      

The Surface Density of States of Superfluid 3He for Different Surface Boundary Conditions

We measured the complex transverse acoustic impedance of superfluid ³He in the B phase by coating a surface with ⁴He to study the boundary condition dependence of the surface bound states. Observed features in the temperature dependence were similar to those without ⁴He coating. However, temperatures showing singularities became higher and variations in the dependence became smaller. The small variations indicated that a specular surface was realized by the ⁴He coating. Increase in the singularity temperature indicated that the bandwidth of the surface Andreev bound states became broader by the coating.      

Preparation of barium titanate nanoparticle sphere arrays and their dielectric properties

Barium titanate (BaTiO3) nanoparticles from 27 to 192 nm were prepared by the 2-step thermal decomposition method from barium titanyl oxalate nanoparticles. These particles were dispersed well into 1-propanol, and dense BaTiO3 nanoparticle sphere arrays without stress-field were prepared by the meniscus method. Temperature dependence of dielectric properties was successfully measured using these dense nanoparticle sphere arrays, and size effect on dielectric properties was discussed.     

TiO2 promoted Co/SiO2 catalysts for Fischer–Tropsch synthesis

The addition of small amount of TiO₂ to silica-supported cobalt catalysts significantly increasing the dispersion of cobalt and Co metallic surface area resulting in the remarkable enhancement of the Fisher–Tropsch synthesis (FTS) activity in the slurry-phase reaction. The addition of TiO₂ adjusted the interaction between cobalt and silica support quite well to realize the favorite dispersion and reduction degree of supported cobalt, leading to high catalytic activity in FTS. The properties of various catalysts were characterized by in-situ DRIFT, XRD, TPR, N₂ physisorption and H₂ chemisorption.     

Two-dimensional photonic crystal resist membrane nanocavity embedding colloidal dot-in-a-rod nanocrystals

A novel technique for the fabrication of photonic crystal (PC) nanocavities coupled with colloidal nanocrystals is presented. A waveguiding resist membrane embedding highly emitting dot-in-a-rod nanocrystals was patterned through e-beam lithography and released through wet etching process. The proposed approach makes the PC structure independent of fabrication imperfections induced by etching steps. Micro-photoluminescence spectra revealed degenerated resonant modes (Q-factor approximately 700) whose fabrication-induced spectral splitting is comparable to the full width at half-maximum of the peaks. Active nanocavities tunable from visible to infrared spectral range on GaAs or Si substrates can be easily implemented by this technique.     

Highly spin-polarized materials and devices for spintronics?

The performance of spintronics depends on the spin polarization of the current. In this study half-metallic Co-based full-Heusler alloys and a spin filtering device (SFD) using a ferromagnetic barrier have been investigated as highly spin-polarized current sources. The multilayers were prepared by magnetron sputtering in an ultrahigh vacuum and microfabricated using photolithography and Ar ion etching. We investigated two systems of Co-based full-Heusler alloys, Co₂Cr_{1 − x}Fe_xAl (CCFA(x)) and Co₂FeSi_{1 − x}Al_x (CFSA(x)) and revealed the structure and magnetic and transport properties. We demonstrated giant tunnel magnetoresistance (TMR) of up to 220% at room temperature and 390% at 5 K for the magnetic tunnel junctions (MTJs) using Co₂FeSi_0.5Al_0.5 (CFSA(0.5)) Heusler alloy electrodes. The 390% TMR corresponds to 0.81 spin polarization for CFSA(0.5) at 5 K. We also investigated the crystalline structure and local structure around Co atoms by x-ray diffraction (XRD) and nuclear magnetic resonance (NMR) analyses, respectively, for CFSA films sputtered on a Cr-buffered MgO (001) substrate followed by post-annealing at various temperatures in an ultrahigh vacuum. The disordered structures in CFSA films were clarified by NMR measurements and the relationship between TMR and the disordered structure was discussed. We clarified that the TMR of the MTJs with CFSA(0.5) electrodes depends on the structure, and is significantly higher for L2₁ than B2 in the crystalline structure. The second part of this paper is devoted to a SFD using a ferromagnetic barrier. The Co ferrite is investigated as a ferromagnetic barrier because of its high Curie temperature and high resistivity. We demonstrate the strong spin filtering effect through an ultrathin insulating ferrimagnetic Co-ferrite barrier at a low temperature. The barrier was prepared by the surface plasma oxidization of a CoFe₂ film deposited on a MgO (001) single crystal substrate, wherein the spinel structure of CoFe₂O₄ (CFO) and an epitaxial relationship of MgO(001)[100]/CoFe₂ (001)]110]/CFO(001)[100] were induced. A SFD consisting of CoFe₂ /CFO/Ta on a MgO (001) substrate exhibits the inverse TMR of - 124% at 10 K when the configuration of the magnetizations of CFO and CoFe₂ changes from parallel to antiparallel. The inverse TMR suggests the negative spin polarization of CFO, which is consistent with the band structure of CFO obtained by first principle calculation. The - 124% TMR corresponds to the spin filtering efficiency of 77% by the CFO barrier.     

Dietary Lipids Impacts on Healthy Ageing

Healthy ageing is gaining attention in the lipid nutrition field. As in vivo biomarkers of healthy ageing, we have evaluated the survival, learning/memory performance, and physical potencies in rodents fed a diet supplemented with high-linoleic acid (LNA, ω6) safflower oil or high-α-linolenic acid (ALA, ω3) perilla oil for long periods. The results suggested that perilla oil with a low ω6/ω3 ratio is beneficial for healthy ageing. In order to address this issue further, we determined the survival of stroke-prone SHR (SHRSP) rats fed a conventional rodent diet supplemented with 10% fat or oil. Survival was longer with ω3-rich oils compared with ω6-rich oils. However, some kinds of vegetable oils and hydrogenated oils shortened the survival of SHRSP rats to an unusual degree (ca. 40% compared with that of ω6-rich oil) that could not be accounted for by the fatty acid and phytosterol composition of the oils. The observed decrease in platelet counts was associated with pathological changes in the kidney and other organs. Dihydro-vitamin K1 is proposed as a likely candidate as a stroke-stimulating factor in hydrogenated oils. Thus, factors other than fatty acids (ω6/ω3 balance) and phytosterols must be taken into account when fats and oils are evaluated in relation to healthy ageing.     

The Role of Crystallographic Texture and Basal Plane Slip on Microstructurally Short Fatigue Crack Initiation and Propagation in Forged Billet and Rolled Bar Ti-6Al-4V Alloy

Tension-compression fatigue tests were conducted on forged (F-950) and rolled (R-950) Ti-6Al-4V alloys. The role of basal texture, produced by forging, was compared with prismatic texture, produced by rolling, on microstructurally short fatigue crack growth initiation and growth resistance. The fatigue life of R-950 alloy proved to be higher than that of F-950 alloy. Major differences in fatigue crack growth rate were detected in the short fatigue crack region at crack lengths of below 100 µm (F-950 alloy showing low resistance). To quantify the effect of texture alone, the opening/closure behaviour of a microstructurally small crack was analysed from the data obtained by combining an automatic in situ observation system with a digital image correlation technique. This analysis showed the crack opening stress of both alloys to be close to identical in the short fatigue crack growth region, nullifying the effect of crack closure. To study the effect of texture, cross-sectional electron backscatter diffraction analysis was performed at crack initiation sites. The results revealed that in F-950 alloy, short fatigue crack growth proceeded along basal planes that had similarly-oriented grains, whereas in R-950 alloy, short fatigue crack growth did not follow prismatic planes: the orientation varied.