Preparation of microporous polypropylene sheets containing CaCO3 filler: Effect of draft ratio

Microporous polypropylene sheets were prepared as follows. First, polypropylene pellet-containing CaCO₃ filler was extruded to prepare base sheets, which were then biaxially stretched. The draft effect at the extrusion process was studied in relation to some properties of the resultant microporous polypropylene sheets. © 1996 John Wiley & Sons, Inc.     

Microporous polypropylene fibers containing poly(methylsilsesquioxane) filler

Microporous polypropylene fibers were prepared by stretching polypropylene fibers containing poly(methylsilsesquioxane) filler. The properties of the resultant fibers are controllable by adjusting the filler content and stretching degree. The resultant fibers have a fine texture of polypropylene fibrils, in which the filler particles are dispersed. Some properties were investigated: tensile strength, elongation, Young's modulus, porosity, pore size, and specific surface area. © 1996 John Wiley & Sons, Inc.     

Cytoskeletal Protein 4.1G Is Essential for the Primary Ciliogenesis and Osteoblast Differentiation in Bone Formation

The primary cilium is a hair-like immotile organelle with specific membrane receptors, including the receptor of Hedgehog signaling, smoothened. The cilium organized in preosteoblasts promotes differentiation of the cells into osteoblasts (osteoblast differentiation) by mediating Hedgehog signaling to achieve bone formation. Notably, 4.1G is a plasma membrane-associated cytoskeletal protein that plays essential roles in various tissues, including the peripheral nervous system, testis, and retina. However, its function in the bone remains unexplored. In this study, we identified 4.1G expression in the bone. We found that, in the 4.1G-knockout mice, calcium deposits and primary cilium formation were suppressed in the trabecular bone, which is preosteoblast-rich region of the newborn tibia, indicating that 4.1G is a prerequisite for osteoblast differentiation by organizing the primary cilia in preosteoblasts. Next, we found that the primary cilium was elongated in the differentiating mouse preosteoblast cell line MC3T3-E1, whereas the knockdown of 4.1G suppressed its elongation. Moreover, 4.1G-knockdown suppressed the induction of the cilia-mediated Hedgehog signaling and subsequent osteoblast differentiation. These results demonstrate a new regulatory mechanism of 4.1G in bone formation that promotes the primary ciliogenesis in the differentiating preosteoblasts and induction of cilia-mediated osteoblast differentiation, resulting in bone formation at the newborn stage.     

Mouse Gastric Epithelial Cells Resist CagA Delivery by the Helicobacter pylori Type IV Secretion System

The initial step in bacterial infection is adherence of the bacterium to the target cell surface. Helicobacter pylori exploits the interaction of bacterial adhesin protein HopQ with human epithelial CEACAMs (CEACAM1, 5, and 6) to stably adhere to gastric epithelial cells, which is necessary for delivery of the H. pylori CagA oncoprotein into the epithelial cells via a type IV secretion system. In contrast to human CEACAMs, however, HopQ does not interact with Ceacam1 (mouse CEACAM1) in vitro or in CHO cells ectopically expressing Ceacam1. Since the mouse genome lacks Ceacam5 and Ceacam6, no significant HopQ–Ceacam interaction may occur in mouse gastric epithelial cells. Here, we found that the mouse stomach has a much lower expression level of Ceacam1 than the expression level of CEACAM1 in the human stomach. Consistently, mouse gastric epithelial cells resist CagA delivery by cagA-positive H. pylori, and the delivery is restored by ectopic expression of human CEACAM1 or CEACAM5 in mouse gastric epithelial cells. Thus, despite the fact that mice are routinely used for H. pylori infection studies, a low expression level of Ceacam1 in the mouse stomach together with the loss or greatly reduced interaction of HopQ with Ceacams make the mouse an inappropriate model for studying the role of H. pylori-delivered CagA in gastric pathogenesis, including the development of gastric cancer.     

Deposition of Lead Phosphate by Lead-Tolerant Bacteria Isolated from Fresh Water near an Abandoned Mine

Specialist bacteria can synthesize nanoparticles from various metal ions in solution. Metal recovery with high efficiency can be achieved by metal-tolerant microorganisms that proliferate in a concentrated metal solution. In this study, we isolated bacteria (Pseudomonas sp. strain KKY-29) from a bacterial library collected from water near an abandoned mine in Komatsu City, Ishikawa Prefecture, Japan. KKY-29 was maintained in nutrient medium with lead acetate and synthesized hydrocerussite and pyromorphite nanoparticles inside the cell; KKY-29 also survived nanoparticle synthesis. Quantitative PCR analysis of genes related to phosphate metabolism showed that KKY-29 decomposed organic phosphorus to synthesize lead phosphate. KKY-29 also deposited various metal ions and synthesized metal nanoparticles when incubated in various metal salt solutions other than lead. The present study considers the development of biotechnology to recover lead as an economically valuable material.     

Effect of matrix's type on the dynamic properties for short fiber-elastomer composite

The dynamic moduli, E′ and E″, and tan δ for PET–CR, PET–EPDM, and PET–UR composites with unidirectional short fibers were studied as a function of temperature by using a Rheovibron. The temperature dependence of tan δ showed three peaks for PET–elastomer composites. The peaks at the low temperature corresponded to the main dispersion of the respective matrixes and the peak at about 140°C to the α-dispersion of PET fiber. A small and broad peak observed at a temperature between 60 and 120°C may be caused by the relaxation of the interface region between fibers and matrix. The longitudinal storage modulus for the composite E was given by the parallel model as \documentclass{article}\pagestyle{empty}\begin{document}$ {\rm E'}_\parallel = V_f \cdot E'_f + V_m \cdot E'_m $\end{document}, where E and E are the storage moduli for fiber and matrix and V_f and V_m are the volume fraction of fiber and matrix, respectively. In the transverse direction of fibers, the composite modulus E was expressed by the logarithmic law of mixing as follows: \documentclass{article}\pagestyle{empty}\begin{document}$ \log E'_ \bot = V_f \cdot \log E'_f + V_m \cdot \log E'_m $\end{document}. The peak values of tan δ from the main dispersion of the respective matrixes were given by the equation, (tan δ_⊥max)_c/(tan δ_max)_m 1 ? β · V_f, where (tan δ_⊥max)_c and (tan δ_max)_m are the maximum values of the loss tangent for the composite and matrix, respectively, and β is coefficient depending on matrix's type. The β value of PET–CR composite is the largest one among those of the composites.     

Copolymerization of Vinyl Chloride and Ethylene with Cp<Superscript>*</Superscript>Ti( OCH<Subscript>3</Subscript>)<Subscript>3</Subscript>/MAO Catalyst

Summary Copolymerization of vinyl chloride (VC) and ethylene with Cp^*Ti( OCH₃)₃/MAO catalyst was investigated. The Cp^*Ti( OCH₃)₃/MAO catalyst initiated the copolymerization of VC with ethylene, although the copolymer yields were low. In the ¹³C NMR spectra of the copolymers, the peaks based on junction part between VC and ethylene was observed, but the signals were small. From DSC measurement of the copolymers, only one glass transition temperature was observed. Thus, it is clear that the copolymerization with Cp^*Ti( OCH₃)₃/MAO catalysts gave the copolymer, and the copolymer consisting of block sequence rather than random copolymer. Received: 13 November 2002/Revised: 6 January 2003/Accepted: 10 January 2003 Correspondence to Kiyoshi Endo     

Indentation-induced ductile behavior of glass–ceramics involving layered aluminosilicates

Contact damage in materials is critical in engineering applications because it influences mechanical resistance, such as wear, erosion, and impact failure. Indentation tests were performed using a tungsten carbide ball indenter (Hertzian contact) on the surfaces of glass–ceramics containing hexagonal CaAl₂Si₂O₈ or mica crystals (fluorophlogopite), both of which have a layered structure. The stress–strain relation and the permanent deformation on the surface, as well as the observation of the microcrack zone by X-ray computed tomography using synchrotron radiation, revealed that the glass–ceramic with hexagonal CaAl₂Si₂O₈ showed ductility similar to the quasi-plastic behavior previously observed in the mica glass–ceramic. The yield stresses of the glass–ceramics were estimated from the stress deviating from the stress–strain relation assuming complete elastic response between the ball and the sample. The ratio of the yield stress to Young modulus (Y/E) of the glass–ceramic with hexagonal CaAl₂Si₂O₈ was determined to be higher than that of the mica glass–ceramic.     

Residual stress versus microstructural effects on the strength and toughness of phase-separated PbO–B2O3–Al2O3 glasses

A few authors have reasonably proposed that liquid–liquid phase-separated (LLPS) glasses could show improved fracture strength, S_f, and toughness, K_Ic, as the second phase could provide a barrier to crack propagation via deflection, bowing, trapping, or bridging. Due to the associated tensile or compressive residual stresses, the second phase could also act as a toughening or a weakening mechanism. In this work, we investigated five glasses of the PbO–B₂O₃–Al₂O₃ system spanning across the miscibility gap: Four of them undergo LLPS—three are binodal (two B₂O₃-rich and one PbO-rich) and one is spinodal—and one does not show LLPS (composition outside the miscibility gap). Their compositions were designed in such a way that the amorphous particles are under compressive residual stresses in some and under tensile residual stresses in others. The following mechanical properties were determined: the Vickers hardness, ball on three balls (B3B) strength, and toughness, K_Ic-SEVNB (single-edge V-notch beam [SEVNB]). The microstructures and compositions were analyzed using scanning electron microscopy with energy-dispersive X-ray spectrometry. The spinodal glass showed, by far, the best mechanical properties. Its K_Ic-SEVNB = 1.6 ± 0.1 MPa m^1/2, which embodies an increase of almost 50% over the B₂O₃-rich binodal composition, and 90% considering the PbO-rich binodal composition. Moreover, its fracture strength, S_f = 166 ± 7 MPa, is one of the highest ones ever reported for an LLPS glass. Fracture analyses evidenced that the spinodal composition exhibited the lowest net stress at the fracture point. Moreover, calculations indicate that the internal residual stress level is the lowest in the spinodal glass. The overall results indicate that the microstructural effect of the spinodal glass is the most significant factor for its superior mechanical properties. This work corroborates the idea that LLPS provides a feasible and stimulating solution to improve the mechanical properties of glasses.