Effect of stress wave shape on the crack propagation velocity in cyclic delayed failure

Crack propagation velocity in delayed failure under superposed repeating load, ($\text{d}\text{a/}\text{d}\text{t)}{}_{\mathrm{R}}$, was compared with that under static load, ($\text{d}\text{a/}\text{d}\text{t)}{}_{\mathrm{S}}$Two peaks appear on the relation between decreasing rate of crack propagation velocity, $\text{1-β = 1 ? (}\text{d}\text{a/}\text{d}\text{t))}{}_{\mathrm{R}}\text{/(}\text{d}\text{a/}\text{d}\text{t)}{}_{\mathrm{S}}$ and frequency, ?, both under sinusoidal and square load. By changing the ratio of holding time at maximum stress intensity factor to that at minimum stress intensity factor in square load, it was deduced that the existence of two peaks on the 1 ? β vs $\text{f}$ curve was caused by an asymmetric interaction between hydrogen atoms and cyclic moving of the position with triaxial tensile stress at crack tip. Moreover, the relation between 1 ? β and $\text{f}$ under the positive or negative saw tooth load could be well explained by the interaction model.     

Eosinophilic granular ceels in oligodendrogliomas. An ultrastructural study

In three cases of oligodendrogliomas, atypical cells rich in eosinophilic cytoplasm, resembling plump astroyctic or astroblastic cells, were studied under the electron microscopy. These cells showed finely granular cytoplasm with routine hematoxylin-eosin preparation; ultrastructurally, they exhibited abundant, round cytoplasmic bodies of autophagic-vacuole type, in addition to other fine structures characteristic of oligodendroglioma cells.     

Acidophilic xylanase from Aureobasidium pullulans: efficient expression and secretion in Pichia pastoris and mutational analysis

A yeast-like fungus Aureobasidium pullulans var. melanigenum strain ATCC 20524 produces an extracellular acidophilic endo-1,4-beta-xylanase with an optimum pH of 2.0 [Ohta et al., J. Biosci. Bioeng., 92, 262-270 (2001)]. The xynI cDNA encoding the precursor protein (XynI) was expressed in the methylotrophic yeast Pichia pastoris under the control of the alcohol oxidase I gene promoter. The 34 amino acid prepro-signal peptide of the A. pullulans XynI directed the efficient secretion of 178 mg of active xylanase per liter of the culture medium. The secretion level of the xylanase with its own signal peptide was comparable to that of the mature protein fused to the prepro leader from Saccharomyces cerevisiae alpha-mating factor and twofold higher than that of the mature protein fused to the pre-type signal peptide from P. pastoris acid phosphatase. The N-terminal amino acid sequence and the apparent M(r) of 24 kDa of the secreted recombinant protein indicated the native-like processing of the A. pullulans XynI signal sequence in P. pastoris. The three-dimensional model and mutational analysis of the xynI gene product showed that Asp-73 and Glu-157 residues located at the upper and lower edges of the active site cleft, respectively, play a significant role in its low pH optimum.     

The protein encoded by cancer/testis gene D40/AF15q14 is localized in spermatocytes, acrosomes of spermatids and ejaculated spermatozoa

We have previously identified and cloned a human gene, D40, that is preferentially expressed in testis among normal organs, while it is widely expressed in various human tumor cell lines and primary tumors derived from different organs. In this report, we have examined the expression and localization of this protein in human testis with an antibody specific to D40 protein. In Western analyses, the anti-D40 antibody recognized a major band with a molecular mass of 300 kDa and a minor band of 250 kDa. These bands were not observed in the testis lysates from patients with Sertoli-cell-only syndrome and with Kleinfelter syndrome, who lack germ cells of the testis, indicating that D40 protein is expressed in the germ cells of normal testis. Immunohistochemical studies have revealed that D40 protein is highly expressed in spermatocytes and in the pre-acrosome of round spermatids. In the acrosome, D40 protein expression is observed not inside but outside the acrosome membrane. This is consistent with the finding that the amino-acid sequence at the amino terminal of the D40 protein lacks a hydrophobic signal peptide that is required for proteins to translocate to the membrane. Expression of D40 protein is observed in the acrosome of ejaculated spermatozoa as well, although the level is low compared with that in the pre-acrosome of spermatids. These results suggest that D40 protein plays important roles in spermatogenesis, especially in the formation and maintenance of the acrosome.     

Application of focused ion beam techniques and transmission electron microscopy to thin-film transistor failure analysis

The locations of process-induced defects in hydrogenated amorphous silicon thin-film transistors (a-Si:H TFTs), which are used as elements of active-matrix liquid crystal displays, were investigated by combining focused ion beam techniques with cross-sectional transmission electron microscopy (X-TEM). The FIB technique is applied to TFT failure analysis problems, which require considerable localised etching without inducing mechanical stress or damage at fragile failure locations. We demonstrate the manner in which these techniques are used to characterise TFT defects such as pinholes and portions of the multilayer damaged by mechanical stress. A dramatic improvement brought about by the FIB technique is the increase in temporal efficiency of sample preparations. X-TEM observations also lead to identification of the fault and analysis of its cause, which in turn lead to a marked yield improvement.     

Environmental remediation by an integrated microwave/UV illumination technique. 8. Fate of carboxylic acids, aldehydes, alkoxycarbonyl and phenolic substrates in a microwave radiation field in the presence of TiO2 particles under UV irradiation

Thermal and nonthermal effects originating when a system is subjected to a microwave radiation field in the TiO2-photocatalyzed transformation of model substances containing various functional groups (e.g., benzoic acid, phthalic acid, o-formylbenzoic acid, phthalaldehyde, succinic acid, dimethyl phthalate, diethyl phthalate, and phenol) have been examined under simultaneous irradiation by ultraviolet (UV) and microwave (MW) radiations. Characteristics of the microwave effects and the fate of each substrate during the microwave-assisted photocatalytic process were monitored by UV absorption spectroscopy, HPLC methods, total organic carbon assays, and identification of intermediates using electrospray mass spectral techniques. Microwave thermal and nonthermal effects were delineated by comparing results from MW-generated internal heat versus conventional external heating, and at constant ambient temperature under a microwave field. Factors involved in the nonthermal component of the microwave radiation were inferred for the initial adsorption of the substrate and its subsequent degradation occurring on the surface of TiO2 particles. Microwave effects bear on the mechanism through which a model substrate undergoes oxidative degradation. A characteristic feature of these effects was briefly examined by considering the behavior of polar (dipole moments) substrates in a microwave radiation field.     

Elasto-plastic analysis of orthogonally stiffened plates with initial imperfections under uniaxial compression

In general, the stiffened plates consisting of steel plate elements are unavoidably accompanied by initial imperfections such as residual stresses and initial deflections, which have considerable effects on their ultimate strength. Therefore, it is needed for designing them to develop more rational method taking the ultimate strength influenced by initial imperfections into account rather than the conventional design method being on the basis of the linear elastic buckling theory.From this point of view, this study aims to evaluate rigorously the ultimate strength of orthogonally stiffened plate with initial imperfections under uniaxial in-plane compression. The elasto-plastic finite element method is applied to attain this purpose. By a happy combination of modal analytical technique and conventional finite element method, much reduction of the degree of freedom can be expected to be realized herewith. Some numerical calculations are performed by means of this rigorous method to examine the exactness of the analysis. Moreover, the numerical results are compared with the experimental ones.     

Electrodeposition of nickel from Ni(CF3COO)2-halide-MeOH bath

The following effects were found for nickel deposition from NI(CF₃COO)₂-halide-MeOH bath:

The anode and cathode current efficiencies became higher by the addition of halide (NH₄Cl, KBr, or NH₄Br) into the Ni(CF₃COO)₂-MeOH bath.

Especially, the cathode current efficiency and the range of cd which can be obtained good nickel deposits became higher and wider respectively, by the addition of ammonium halide (NH₄ or NH₄Br).

The values of _c and i_oc for nickel deposition also became larger by the addition of ammonium halide. Therefore, it appears that the addition of ammonium halide facilitates the nickel deposition.

In view of n^.=.1 and E_c^.=.5kcal/mol in Tafel region, it may be concluded that the nickel deposition from the Ni(CF₃COO)₂-halide-MeOH bath takes place through Ni⁺.     

Electron holographic 3-D nano-analysis of Au/TiO2 catalyst at interface

Three-dimensional (3-D) nanostructures of gold catalysts supported on TiO2 were analysed by electron holography and high-resolution electron microscopy. The contact angle of the gold particle on TiO2 tended to be >90 degrees in the case of gold particles with a size (height) of >4 nm and it tended to be <90 degrees for gold particles with a height of <2 nm. The change in morphology increases the perimeter at the Au/TiO2 interface as the particle size decreases. This change in 3-D structure should be attributed to a change in electronic structure at the interface. It was found that electron holography enabled 3-D analysis at the atomic level and was effective for analysing nanostructured particles.     

MolSpace: a computer desktop tool for visualization of massive molecular data

The authors have developed a software tool, MolSpace, to visualize massive molecular datasets. MolSpace can project a set of massive multivariate data onto a visual space (two- or three-dimensional space) by means of principal component analysis. MolSpace allows users not only to draw a scatter diagram of the data but also to display their two- or three-dimensional molecular structures as the objects in that space. With a probe (a molecular object) the user can navigate vast data spaces, thus facilitating understanding of the data structure. In addition, partial space searching is also available that is based on similarity searching techniques. It is possible to interrogate a three-dimensional structure of a chemical compound that corresponds to each object on the space in real time. The detail of the system is discussed with an illustrative example.