Soot predictions in premixed and non-premixed laminar flames using a sectional approach for PAHs and soot

A new soot model is presented, which has been developed for CFD applications, combining accuracy and efficiency. While the chemical reactions of small gas phase species are captured by a detailed chemical kinetic mechanism, polycyclic aromatic hydrocarbons (PAHs) and soot particles are represented by sectional approaches. The latter account for important mechanisms such as the formation of sections, their oxidation, the condensation of acetylene, and the collisions between sections. The model has been designed to predict soot for a variety of fuels with good accuracy at relatively low computational cost. Universal model parameters are applied, which require no tuning in dependence of test case or fuel. Soot predictions of ethylene, propylene, kerosene surrogate, and toluene flames are presented, which show good agreement with the experimental data. Furthermore, the importance of the correct choice for thermodynamic data of PAHs and soot is highlighted and the impact of heat radiation is discussed.     

Influence of plasticizers and cryogenic grinding on the high‐cooling‐rate solidification behavior of PBT/PET blends

Two structurally different plasticizers (cyclic and linear) and the effect of cryogenic grinding on the solidification behavior at high cooling rates by a continuous cooling transformation approach of poly(butylene terephthalate)/poly(ethylene terephthalate), PBT/PET, blends are described. The solidification curve (density versus cooling rate) is confirmed as an effective tool to compare the differences in crystallization behavior under conditions mimicking processing. In comparison to the bulky cyclic plasticizer, the linear oligomeric one was found to have a more pronounced influence on the crystallization behavior. A 60/40 by weight PBT/PET blend shows a drop‐off of density at ～50 K/s. In the plasticized sample, the long‐range crystalline order appears up to a cooling rate of ～250K/s, making the blend comparable to pure PBT. Grinding the components before blending further improves crystallizability and synergy to the addition of the plasticizer. The results suggest the important role of local chain mobility in the solidification behavior at high cooling rates. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 43083.     

Carbon nanotubes/amorphous carbon composites as high-power negative electrodes in lithium ion capacitors

A nitrogen-rich carbon nanotubes/amorphous carbon (CNT/C) composite was prepared by carbonising a CNT/polyaniline (PANI) composite, and characterised. Scanning electron microscopy and X-ray photoelectron spectroscopy confirmed that the composite retained a mesoporous CNT structure as its backbone, whilst the nitrogen-rich PANI-derived carbon formed a thin amorphous coating on the CNT surface. Electrochemical characterisation of the CNT/C composite indicated that it had nearly double the reversible Li⁺ intercalation capacity (390 vs. 219 mAh g^?1) and 39 % less irreversible capacity (622 vs. 1,015 mAh g^?1) than the pristine CNT. The CNT/C composite showed exceptionally high rate capability with a de-intercalation capacity of 81 mAh g^?1 at a very high charge/discharge rate of 60 C (time taken for charge or discharge is 1 min) (1 C = 1 h charge or discharge), whereas the pristine CNT delivered 53 mAh g^?1 at this C-rate. By comparison, the rate capabilities of conventional graphite (N3 and SLP30) were very poor above 5 C (~17 mAh g^?1 at 5 C). Both the pristine CNT and CNT/C composite showed an excellent cyclability at 1 C charge/discharge over 600 cycles. The CNT/C composite maintained a fairly stable capacity of ~200 mAh g^?1 after 600 cycles, whilst the commercial graphite showed a steady and significant decrease in de-intercalation capacity; reaching <70 mAh g^?1 after 600 cycles.     

Mechanical properties of virgin and recycled polyolefin‐based composite laminates reinforced with jute fabric

Polyolefin‐based composite laminates reinforced with jute fabric were prepared by compression molding and investigated in terms of flexural properties and impact behavior. The use of a virgin polypropylene as the matrix was compared with two polyolefin matrices coming from discarded car bumpers and selected packaging wastes, respectively, and mainly constituted by mixtures of polyethylene and polypropylene resins. The influence of a coupling agent (maleated polypropylene) was always considered in order to improve the interfacial adhesion and, consequently, the composite strength. The effect of this coupling agent, clearly dependent on the amount of polypropylene phase in the overall mixture, was found to be satisfactory only in the case of virgin polypropylene‐based systems. These latter, in presence of maleated polypropylene, have shown higher flexural parameters, lower propagation energy and higher breaking impact load with respect to uncompatibilized ones. Results were supported by morphological observations of impact surfaces, always highlighting a poor adhesion at the reinforcement–matrix interface except in compatibilized virgin polypropylene‐based laminates. POLYM. COMPOS., 36:2022–2029, 2015. © 2014 Society of Plastics Engineer     

The Role of Testosterone in the Elderly: What Do We Know?

Testosterone is the most important hormone in male health. Aging is characterized by testosterone deficiency due to decreasing testosterone levels associated with low testicular production, genetic factors, adiposity, and illness. Low testosterone levels in men are associated with sexual dysfunction (low sexual desire, erectile dysfunction), reduced skeletal muscle mass and strength, decreased bone mineral density, increased cardiovascular risk and alterations of the glycometabolic profile. Testosterone replacement therapy (TRT) shows several therapeutic effects while maintaining a good safety profile in hypogonadal men. TRT restores normal levels of serum testosterone in men, increasing libido and energy level and producing beneficial effects on bone density, strength and muscle as well as yielding cardioprotective effects. Nevertheless, TRT could be contraindicated in men with untreated prostate cancer, although poor findings are reported in the literature. In addition, different potential side effects, such as polycythemia, cardiac events and obstructive sleep apnea, should be monitored. The aim of our review is to provide an updated background regarding the pros and cons of TRT, evaluating its role and its clinical applicability in different domains.     

Novel Insights into Autophagy and Prostate Cancer: A Comprehensive Review

Autophagy is a complex process involved in several cell activities, including tissue growth, differentiation, metabolic modulation, and cancer development. In prostate cancer, autophagy has a pivotal role in the regulation of apoptosis and disease progression. Several molecular pathways are involved, including PI3K/AKT/mTOR. However, depending on the cellular context, autophagy may play either a detrimental or a protective role in prostate cancer. For this purpose, current evidence has investigated how autophagy interacts within these complex interactions. In this article, we discuss novel findings about autophagic machinery in order to better understand the therapeutic response and the chemotherapy resistance of prostate cancer. Autophagic-modulation drugs have been employed in clinical trials to regulate autophagy, aiming to improve the response to chemotherapy or to anti-cancer treatments. Furthermore, the genetic signature of autophagy has been found to have a potential means to stratify prostate cancer aggressiveness. Unfortunately, stronger evidence is needed to better understand this field, and the application of these findings in clinical practice still remains poorly feasible.     

Soil-washing design methodology for a lead-contaminated sandy-soil

Soils located near high traffic roadways, particularly where renovations have taken place, typically exhibit elevated levels of trace metals in the upper soil horizon. Regulators are currently seeking an efficient method of site characterization and treatment system design which will lend itself to timely and environmentally efficacious clean-up. The soil investigated in this study was a silty sand collected near a bridge abutment for a major interstate highway. The soil had a total lead content of 1392 mg/kg. In addition, the soil contained a considerable fraction of organic carbon (approximately 6.3%). A sequential chemical extraction indicated that a fraction of contaminants were in labile soil phases and thus amenable to chemical extraction (soil-washing). A soil washing design methodology is presented based on surface chemistry and equilibrium stage operation. In this work, a double layer surface complexation model was used to describe equilibrium sorption behavior and a preliminary design of an ex-situ counter-current equilibrium stage extraction process is presented. Model calibration was conducted using sorption data obtained from a 1:40 solid to liquid ratio (s/l), adsorption edge. Model validation was accomplished with batch titration data and a 1:20 s/l, adsorption edge. The model accurately predicted leachable lead concentrations over a wide pH range. The required number of ideal equilibrium stages was highly sensitive to pH.