The geodesic dynamic relaxation method for problems of equilibrium with equality constraint conditions

This paper presents an extension to the existing dynamic relaxation method to include equality constraint conditions in the process. The existing dynamic relaxation method is presented as a general, gradient‐based, minimization technique. This representation allows for the introduction of the projected gradient, discrete parallel transportation and pull back operators that enable the formulation of the geodesic dynamic relaxation method, a method that accounts for equality constraint conditions. The characteristics of both the existing and geodesic dynamic relaxation methods are discussed in terms of the system's conservation of energy, damping (viscous, kinetic, and drift), and geometry generation. Particular attention is drawn to the introduction of a novel damping approach named drift damping. This technique is essentially a combination of viscous and kinetic damping. It allows for a smooth and fast convergence rate in both the existing and geodesic dynamic relaxation processes. The case study was performed on the form‐finding of an iconic, ridge‐and‐valley, pre‐stressed membrane system, which is supported by masts. The study shows the potential of the proposed method to account for specified (total) length requirements. The geodesic dynamic relaxation technique is widely applicable to the form‐finding of force‐modeled systems (including mechanically and pressurized pre‐stressed membranes) where equality constraint control is desired. Copyright © 2014 John Wiley & Sons, Ltd.     

3D Micromolding of Arrayed Waveguide Gratings on Upconversion Luminescent Layers for Flexible Transparent Displays without Mirrors,Electrodes, and Electric Circuits

A new technique for the fabrication of arrayed waveguide gratings on upconversion luminescent layers for flexible transparent displays is reported. Ho³⁺‐ and Yb³⁺‐codoped NaYF₄ nanoparticles are synthesized by hydrothermal techniques. Transparent films consisting of two transparent polymers on the NaYF₄ nanoparticle films exhibit mechanical flexibility and high transparence in visible region. Patterned NaYF₄ nanoparticle films are fabricated by calcination‐free micromolding in capillaries. Arrayed waveguide gratings consisting of the two transparent polymers are formed on the patterned NaYF₄ nanoparticle films by micromolding in capillaries. Green and red luminescence is observed from the upconversion luminescent layers of the NaYF₄ nanoparticle films in the arrayed waveguide gratings under excitation at 980 nm laser light. Arrayed waveguide gratings on the upconversion luminescent layers are fabricated with Er³⁺‐doped NaYF₄ nanoparticles which can convert two photons at 850 and 1500 nm into single photon at 550 nm. These results demonstrate that flexible transparent displays can be fabricated by constructing arrayed waveguide gratings on upconversion luminescent layers, which can operate in nonprojection mode without mirrors, transparent electrodes, and electric circuits.     

Additive effects of methyl ammonium bromide or formamidinium bromide in methylammonium lead iodide perovskite solar cells using decaphenylcyclopentasilane

Journal of Materials Science: Materials in Electronics - Fabrication and characterization of methylammonium lead iodide perovskite solar cells incorporated with methylammonium bromide (MABr),...     

Photostability of Isovaline and its Precursor 5-Ethyl-5- methylhydantoin Exposed to Simulated Space Radiations

Aqueous solutions of isovaline and its precursor molecule, 5-ethyl-5-methylhydantoin, were irradiated with ultraviolet and γ-ray photons, to evaluate their structural stability against space radiation. The degree of photolysis was measured and irradiation products were identified using chiral, reversed-phase and ion-exchange high-performance liquid chromatography. The experimental results show that the degree of photolysis of 5-ethyl-5-methylhydantoin is more significant than that of isovaline under ultraviolet light irradiation, while the results under γ-ray irradiation are the opposite. As the products of isovaline photolysis, aspartic acid, serine, glutamic acid and alanine were dominantly detected.     

水力机械模型试验台的设计研究

扼要介绍在水力机械模型试验台建设中,对试验台的主管路系统、流量率定系统、扭矩测量系统等进行的研究。开发了闸板可抽取式强迫压紧特殊阀,杜绝了管路内漏现象的发生;引进了模型水轮机叶片角度联调机构,在保证叶片角度调整精度的同时又提高了工作效率;采取了保持试验水质清洁的相关措施,节约了宝贵的水资源。该试验台通过了由中国电机工程学会和中国水力发电工程学会组织的技术鉴定,达到国际先进水平。     

Stabilization of poly(vinyl chloride). X. Synergisms between epoxidized polybutadienes and metal soaps on the stabilization of poly(vinyl chloride)

Effects of epoxidized 1,2- or 1,4-polybutadienes on the zinc stearate/calcium stearate synergetic soap-induced thermal stabilization of poly(vinyl chloride) (PVC) were investigated by colorimetry. The remarkable stabilization effects of epoxidized polybutadienes could not be observed on the PVC films without synergetic soaps, while the stabilization of PVC was markedly enhanced by combined use of epoxidized polybutadienes with synergetic soaps. Excessive coloration of cool color-producing zinc chloride-polyene complexes that were the source of abrupt discoloration of stabilized PVC was retarded by using epoxidized polybutadienes together with synergetic soap. The synergism of epoxidized polybutadienes was enhanced with increasing epoxy contents. Moreover, the effect is also clearly dependent on degree of dispersion of epoxidized polybutadienes in PVC. Further colorimetries, infrared (IR), and X-ray photoelectron spectroscopies on the various PVC-containing epoxidized polybutadienes and zinc chloride indicated that the epoxy groups capture the zinc chloride. The synergistic effect between epoxidized polybutadienes and metal soap was ascribed to epoxidized polybutadienes serving as acceptors for the excessive cool color-producing zinc chloride produced by zinc stearate to retard the abrupt discoloration of stabilized PVC. The plate-out phenomenon appeared during the molding process of PVC-containing epoxy compounds was considerably retarded by epoxidized polybutadienes which modified polyols. The polyol-modifying epoxidized polybutadienes also exhibited a marked effect on PVC stabilization with metal soap.     

Injection sclerotherapy for gastric varices using N-butyl-2-cyanoacrylate and ethanolamine oleate

BACKGROUND/AIMS: Tissue adhesive agents, such as the cyanoacrylates, have been used as an alternative to conventional sclerotherapy to treat gastric varices, but the long-term efficacy of this approach has not been determined. We evaluated the efficacy and long-term outcome of injection sclerotherapy with n-butyl-2-cyanoacrylate and ethanolamine oleate in 16 patients with gastric varices. METHODOLOGY: We evaluated the effect of injection sclerotherapy in 16 Japanese patients with gastric varices. Injection sclerotherapy was performed on an emergency basis in 6 patients, an elective basis in 5 patients, and as prophylaxis in 5 patients. RESULTS: No bleeding was observed in the 7 patients in whom gastric varices disappeared during the 51 month follow-up period. The non-bleeding rate after treatment was significantly higher in this group than in the 9 patients in whom gastric varices did not disappear (p<0.05). Acute bleeding was stopped in 5 (83.3%) of 6 patients. The single failure was a patient in whom the sclerosant could not be injected into the gastric varices. No serious complications, such as emboli in other organs, were observed. CONCLUSION: The results suggest that this therapy is a safe and useful treatment for gastric varices and that the goal of injection sclerotherapy should be the disappearance of gastric varices.