Corrosion inhibition of steel by sodium sulphite

The corrosion inhibition of steel in a closed system containing sodium sulphite at room temperature has been established. Steady-state potential as well as weight loss measurements indicated that sodium sulphite did not only remove O₂ from the solution but also brought complete cathodic protection. It was found also that sodium sulphite could tolerate the presence of Cl^?, SO₄^2? and S^2?. In case of sulphite—sulphate or sulphite—chloride mixtures a concentration of 5 × 10^?3M Na₂SO₃ was required to tolerate a wide range of concentration of these aggressive ions. A linear relationship was found between log sulphite concentration and log maximum tolerated concentration of sulphide.     

Comparing the Effects of Microwave and Conventional Heating Methods on the Evaporation Rate and Quality Attributes of Pomegranate (<Emphasis Type="Italic">Punica granatum</Emphasis> L.) Juice Concentrate

Pomegranate juice was concentrated by conventional heating and microwave heating at different operational pressures (12, 38.5, and 100 kPa), and their effects on evaporation rate and quality attributes of concentrated juice were investigated. The final juice concentration of 40° Brix was achieved in 140, 127, and 109 min at 100, 38.5, and 12 kPa, respectively, by using conventional heating. Applying microwave energy decreased required times to 118, 95, and 75 min. The changes in color, anthocyanin content, and antioxidant capacity during concentration processes were investigated. L*, a*, and b* parameters were measured to estimate the intensity of color loss. All Hunter color parameters decreased with time. Results showed that the degradation of color, anthocyanins, and antioxidant activity were more important in conventional heating compared to microwave heating method. Degradation rates increases by increasing process pressure. A first-order kinetics model was applied to modeling changes in total solid content, anthocyanin content, and antioxidant capacity.     

Recycling of used engine oil by different solvent

The refining of lubricating oils from waste lubricating oil was examined utilizing a novel blend of solvent extraction and activated alumina adsorbent. The activity of these solvent extraction blends {toluene, butanol and methanol (A)}, {toluene, butanol and ethanol (B)} and {toluene, butanol and isopropanol (C)} was evaluated experimentally, oil to solvent proportions from 1:1 to 1:3 were analyzed for mixture blend (C). The results confirm solvent mixture (A) gave good efficiency with the highest percent sludge removal. The maximum percent of sludge removal improves with the increase of solvent to oil ratios. The physical properties of the recycle oil were measured. The results show the change in the properties of recycling oil and have good efficiency.     

Efficient 3D point clouds classification for face detection using linear programming and data mining

Most of the applications related to security and biometric rely on skin region detection such as face detection, adult 3D objects filtering, and gesture recognition. In this paper, we propose a robust method for skin detection on 3D coloured point clouds. Then, we extend this method to solve the problem of 3D face detection. To do so, we construct a weighted graph from initial coloured 3D point clouds. Then, we present a linear programming algorithm using a predictive model based on a data mining approach to classify and label graph vertices as skin and non-skin regions. Moreover, we apply some refinement rules on skin regions to confirm the presence of a face. Furthermore, we demonstrate the robustness of our method by showing and analysing some experimental results. Finally, we show that our method deals with many data that can be represented by a weighted graph such as 2D images and 3D models.     

Synthesis and reactions of 2-(p-chloroanilino)-5- (D-galacto-1,2,3,4,5-pentahydroxypentyl)-1,3,4-thiadiazole

Oxidative cyclization of D -galactose (p-chlorophenyl)thiosemicarbazone gave 2-(p-chloroanilino)-5-( D -galacto-1,2,3,4,5-pentahydroxypentyl)-1,3,4-thiadiazole ( 1 ), whose acetylation afforded 2-[N-acetyl-N-(p-chlorophenyl)]-amino-5-( D -galacto-1,2,3,4,5-pentacetoxypentyl)- 1,3,4-thiadiazole ( 3 ). Its periodate oxidation of the glycol groups gave 2-(p-chloroanilino)-1,3,4-thiadiazole-5-carboxaldehyde ( 4 ), which can be transformed into 1,2-[2-(p-chloroanilino)-1,3,4-thiadiazol-5-yl]-1-hydroxy-2-oxoethane. A number of hydrazones of the formyl thiadiazole was prepared and its reduction with sodium borohydride gave 2-(p-chloroanilino)-5-hydroxymethyl-1,3,4-thiadiazole ( 6 ), whose acetylation gave a mono-O-acetyl derivative ( 7 ). Oxidation of the formyl thiadiazole gave 2-(p-chloroanilino)-1,3,4-thiadiazole ( 9 ). The spectral data of the compounds were discussed.     

Calculation of maximum surface settlement induced by EPB shield tunnelling and introducing most effective parameter

This study aims to predict ground surface settlement due to shallow tunneling and introduce the most affecting parameters on this phenomenon.Based on data collected from Shanghai LRT Line 2 project undertaken by TBM-EPB method,this research has considered the tunnel's geometric,strength,and operational factors as the dependent variables.At first,multiple regression(MR) method was used to propose equations based on various parameters.The results indicated the dependency of surface settlement on many parameters so that the interactions among different parameters make it impossible to use MR method as it leads to equations of poor accuracy.As such,adaptive neuro-fuzzy inference system(ANFIS),was used to evaluate its capabilities in terms of predicting surface settlement.Among generated ANFIS models,the model with all input parameters considered produced the best prediction,so as its associated R~2 in the test phase was obtained to be 0.957.The equations and models in which operational factors were taken into consideration gave better prediction results indicating larger relative effect of such factors.For sensitivity analysis of ANFIS model,cosine amplitude method(CAM) was employed; among other dependent variables,fill factor of grouting(n) and grouting pressure(P) were identified as the most affecting parameters.     

Diameter of Single-Walled Carbon Nanotubes (SWCNTs) as an Effective Factor in the Detection and Degradation of PCBs

Polychlorinated biphenyls (PCBs) are chlorinated organic compounds and well known carcinogenic and toxic pollutants. Currently, their detection and degradation to products with less risk are among environmental and health priorities. Passing 2,2′,4,4′,5,5′-Hexachlorobiphenyl (PCB-153) through the armchair single-walled carbon nanotubes (SWCNTs) (8, 8) and (10, 10) was investigated by Modified Neglect of Diatomic Overlap in the semi-empirical method. The analysis of results suggests that there are meaningful changes in the middle of the tubes. Based on the obtained evidence, the nanotubes have substantial potential to interact with the PCB-153 molecule effectively. The results show that the increased diameter in the armchair SWCNTs improves the detection and degradation potential of the tube to PCBs. According to the calculated thermodynamic parameters, the diameter of nano-structures is an effective factor in PCBs removal efficiency, as it could be helpful to make a more sensitive PCB nano-sensor.     

Dielectric properties of new fully conjugated 2H‐ and metal‐pyrazinoporphyrazine network polymers

2,7‐Di‐tert‐butylpyrene was oxidized to 2,7‐di‐tert‐butylpyrene‐4,5,9,10‐tetraone. The latter through condensation reaction with vicinal diamine such as diaminomaleodinitrile afforded heterocyclic monomer, 2,7‐di‐tert‐butyl pyrene[4,5][9,10]bis(2,3‐pyrazine‐5,6‐dinitrile), which was cyclotetramerized to the corresponding 2H‐ and metal‐pyrazinoporphyrazine‐based network polymers (2H‐PyzPz and M‐PyzPz, M = Co, Ni, Zn, or Cu). Elemental analytical results, Infrared, and NMR spectral data of the new prepared molecules are consistent with their assigned formulations. Molecular masses and metal contents of the synthesized polymers proved to be of high molecular masses, which confirm the efficiency of tetramerization polymerization and complexation reactions. Dielectric permittivity, ε′, loss tangent, tan δ, and ac conductivity, σac(ω), of 2H‐PyzPz and M‐PyzPz films were studied as a function of temperature and frequency. It was found that dielectric permittivity, ε′, decreases with the increase of frequency and increases with the increase in temperature. Ac conductivity, σac(ω), is found to vary as Bωs and the frequency exponent, s, is less than unity around room temperature indicating a dominant hopping process. On the other hand, σac(T) of all samples is thermally activated with low activation energies. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011.     

Influence of silicon carbide on structural,optical and magnetic properties of Wollastonite/Fe2O3 nanocomposites

The influence of adding 10, 20 and 30% molar ratio of silicon carbide (SiC) separately to a composite of wollastonite (W) with a fixed content of 10%Fe₂O₃ prepared by wet precipitation method was studied. The crystal structure of the annealed composite powders was inspected by X-ray diffraction (XRD); revealing multi-phase structure. The highest estimated crystallite size investigated by Scherrer equation of W, SiC, WFe:SiC₁₀, WFe:SiC₂₀ and WFe:SiC₃₀ were 53.89, 54.6, 56.3, 48.5 and 54.6 nm respectively; demonstrating the formation of nanocomposites. Particles shape, size and crystallinity of the samples were studied using high resolution transmission electron microscope (HR-TEM). The band gap E_g values of the nanocomposites increased with SiC content having an intermediate value that lies between that of γ-Fe₂O₃ (maghemite) and SiC. Ferromagnetic and paramagnetic contributions were observed in the magnetic hysteresis loops for the composites. This study highlighted that the coercive field (H_ci) of the composites improved with increasing the SiC content. The innovative wollastonite/Fe₂O₃/SiC with amended magnetic properties elicited attention due to their promising application in bone filler and industrial purposes.     

Progression from Graphene and Graphene Oxide to High Performance Polymer-Based Nanocomposite: A Review

In this article, various types of carbon nanofiller and modification of graphene oxide and graphene for the preparation of polymer-based nanocomposites are reviewed. Recently, polymer/graphene and graphene oxide-based materials have attracted tremendous interest due to high performance even at low filler content. The property enhancement is due to the high aspect ratio, high surface area and excellent electrical, thermal and mechanical properties of nanofiller. Different techniques have been employed to fabricate polymer/graphene and graphene oxide nanocomposite with uniform dispersion due to fine matrix/nanofiller interaction. Here we discuss the structure, properties and preparation of these nanocomposites.