Volume Changes of Iron Oxide Compacts under Isothermal Reduction Conditions

Compacts made from chemically grade Fe₂O₃ were fired at 1473K for 6 hrs. The fired compacts were isothermally reduced either by hydrogen or carbon monoxide at 1073–1373K. The O₂ weight‐loss resulting from the reduction process was continuously recorded as a function of time using TGA technique, whereas the volume change at different reduction conditions was measured by displacement method. Porosity measurements, microscopic examination and X‐ray diffraction analysis were used to characterize the fired and reduced products. The rate of reduction at both the initial and final stages was increased with temperature. The reduction mechanism deduced from the correlations between apparent activation energy values, structure of partially reduced compacts and application of gas‐solid reaction models revealed the reduction rate (dr/dt) at both the initial and final stages. At early stages, the reduction was controlled by a combined effect of gaseous diffusion and interfacial chemical reaction mechanism, while at the final stages the interfacial chemical reaction was the rate determining step. In H₂ reduction, maximum swelling (80%) was obtained at 1373K, which was attributed to the formation of metallic iron plates. In CO reduction, catastrophic swelling (255%) was obtained at 1198K due to the formation of metallic iron plates and whiskers.     

A Leakage-Based Precoding Scheme for Downlink Multi-User MIMO Channels

In multiuser MIMO downlink communications, it is necessary to design precoding schemes that are able to suppress co-channel interference. This paper proposes designing precoders by maximizing the so-called signal-to-leakage-and-noise ratio (SLNR) for all users simultaneously. The presentation considers communications with both single- and multi-stream cases, as well as MIMO systems that employ Alamouti coding. The effect of channel estimation errors on system performance is also studied. Compared with zero-forcing solutions, the proposed method does not impose a condition on the relation between the number of transmit and receive antennas, and it also avoids noise enhancement. Simulations illustrate the performance of the scheme     

Design of Unskewed Interior Permanent Magnet Traction Motor with Asymmetric Flux Barriers and Shifted Magnets for Electric Vehicles

Abstract

Interior permanent magnet synchronous motors (IPMSMs) are commonly used in electric and hybrid electric vehicles. Nissan Leaf electric vehicle (EV) uses skewed-rotor IPMSM as a traction motor. This motor is considered as a benchmark in this work. Although, skewing improves the torque quality of the motor by reducing the torque ripple, it reduces the average torque and increases the motor manufacturing complexity and cost. This article proposes improvements to the benchmark motor torque quality without skewing. The proposed motor uses the same stator winding and rotor magnet topologies of the benchmark motor with the same geometric constraints and magnet volume. Modifications are applied to the placement of the magnets in the rotor and the shape of the flux barriers to achieve the performance requirements. The design procedure of the proposed unskewed design is illustrated. Moreover, the electromagnetic performance of the proposed design is investigated. The design shows competitive performance in terms of the average torque, torque ripple, cogging torque, and efficiency compared to the benchmark motor. The mechanical integrity of the design is also verified. The proposed design is found to be a suitable alternative to the benchmark traction motor with a reduced rotor weight and without skewing.     

Distributed Bayesian diagnosis for modular assembly systems—A case study

The growing interest in modular and distributed approaches for the design and control of intelligent manufacturing systems gives rise to new challenges. One of the major challenges that have not yet been well addressed is monitoring and diagnosis in distributed manufacturing systems. In this paper we propose the use of a multi-agent Bayesian framework known as Multiply Sectioned Bayesian Networks (MSBNs) as the basis for multi-agent distributed diagnosis in modular assembly systems. We use a close-to-industry case study to demonstrate how MSBNs can be used to build component-based Bayesian sub-models, how to verify the resultant models, and how to compile the multi-agent models into runtime structures to allow consistent multi-agent belief update and inference.     

Three proteins involved in Caenorhabditis elegans vulval invagination are similar to components of a glycosylation pathway

We have molecularly analyzed three genes, sqv-3, sqv-7, and sqv-8, that are required for wild-type vulval invagination in Caenorhabditis elegans. The predicted SQV-8 protein is similar in sequence to two mammalian beta(1,3)-glucuronyltransferases, one of which adds glucuronic acid to protein-linked galactose-beta(1, 4)-N-acetylglucosamine. SQV-3 is similar to a family of glycosyltransferases that includes vertebrate beta(1, 4)-galactosyltransferases, which create galactose-beta(1, 4)-N-acetylglucosamine linkages. One model is therefore that SQV-8 uses a SQV-3 product as a substrate. SQV-7 is similar to members of a family of nucleotide-sugar transporters. The sqv genes therefore are likely to encode components of a conserved glycosylation pathway that assembles a C. elegans carbohydrate moiety, the absence of which perturbs vulval invagination.     

A framework for state-space estimation with uncertain models

Develops a framework for state-space estimation when the parameters of the underlying linear model are subject to uncertainties. Compared with existing robust filters, the proposed filters perform regularization rather than deregularization. It is shown that, under certain stabilizability and detectability conditions, the steady-state filters are stable and that, for quadratically-stable models, the filters guarantee a bounded error variance. Moreover, the resulting filter structures are similar to various (time- and measurement-update, prediction, and information) forms of the Kalman filter, albeit ones that operate on corrected parameters rather than on the given nominal parameters. Simulation results and comparisons with ℋ_∞ guaranteed-cost, and set-valued state estimation filters are provided     

Light-dependent changes in outer segment free-Ca2+ concentration in salamander cone photoreceptors

Simultaneous measurements of photocurrent and outer segment Ca2+ were made from isolated salamander cone photoreceptors. While recording the photocurrent from the inner segment, which was drawn into a suction pipette, a laser spot confocal technique was employed to evoke fluorescence from the outer segment of a cone loaded with the Ca2+ indicator fluo-3. When a dark-adapted cone was exposed to the intense illumination of the laser, the circulating current was completely suppressed and fluo-3 fluorescence rapidly declined. In the more numerous red-sensitive cones this light-induced decay in fluo-3 fluorescence was best fitted as the sum of two decaying exponentials with time constants of 43 +/- 2.4 and 640 +/- 55 ms (mean +/- SEM, n = 25) and unequal amplitudes: the faster component was 1.7-fold larger than the slower. In blue-sensitive cones, the decay in fluorescence was slower, with time constants of 140 +/- 30 and 1,400 +/- 300 ms, and nearly equal amplitudes. Calibration of fluo-3 fluorescence in situ from red-sensitive cones allowed the calculation of the free-Ca2+ concentration, yielding values of 410 +/- 37 nM in the dark-adapted outer segment and 5.5 +/- 2.4 nM after saturating illumination (mean +/- SEM, n = 8). Photopigment bleaching by the laser resulted in a considerable reduction in light sensitivity and a maintained decrease in outer segment Ca2+ concentration. When the photopigment was regenerated by applying exogenous 11-cis-retinal, both the light sensitivity and fluo-3 fluorescence recovered rapidly to near dark-adapted levels. Regeneration of the photopigment allowed repeated measurements of fluo-3 fluorescence to be made from a single red-sensitive cone during adaptation to steady light over a range of intensities. These measurements demonstrated that the outer segment Ca2+ concentration declines in a graded manner during adaptation to background light, varying linearly with the magnitude of the circulating current.     

Cysteine-scanning mutagenesis of helix IV and the adjoining loops in the lactose permease of Escherichia coli: Glu126 and Arg144 are essential. off

Cys-scanning mutagenesis has been applied to the remaining 45 residues in lactose permease that have not been mutagenized previously (from Gln100 to Arg144 which comprise helix IV and adjoining loops). Of the 45 single-Cys mutants, 26 accumulate lactose to > 75% of the steady state observed with Cys-less permease, and 14 mutants exhibit lower but significant levels of accumulation (35-65% of Cys-less permease). Permease with Phe140-->Cys or Lys131-->Cys exhibits low activity (15-20% of Cys-less permease), while mutants Gly115-->Cys, Glu126-->Cys and Arg144-->Cys are completely unable to accumulate the dissacharide. However, Cys-less permease with Ala or Pro in place of Gly115 is highly active, and replacement of Lys131 or Phe140 with Cys in wild-type permease has a less deleterious effect on activity. In contrast, mutant Glu126-->Cys or Arg144-->Cys is inactive with respect to both uphill and downhill transport in either Cys-less or wild-type permease. Furthermore, mutants Glu126-->Ala or Gln and Arg144-->Ala or Gln are also inactive in both backgrounds, and activity is not rescued by double neutral replacements or inversion of the charged residues at these positions. Finally, a mutant with Lys in place of Arg144 accumulates lactose to about 25% of the steady state of wild-type, but at a slow rate. Replacement of Glu126 with Asp, in contrast, has relatively little effect on activity. None of the effects can be attributed to decreased expression of the mutants, as judged by immunoblot analysis. Although the activity of most of the single-Cys mutants is unaffected by N-ethylmaleimide, Cys replacement at three positions (Ala127, Val132, or Phe138) renders the permease highly sensitive to alkylation. The results indicate that the cytoplasmic loop between helices IV and V, where insertional mutagenesis has little effect on activity [McKenna, E., et al. (1992) Proc. Natl. Acad. Sci. U.S.A. 89, 11954-11958], contains residues that play an important role in permease activity and that a carboxyl group at position 126 and a positive charge at position 144 are absolutely required.     

Fabrication and modification of polyvinylchloride based heterogeneous cation exchange membranes by simultaneously using Fe-Ni oxide nanoparticles and Ag nanolayer: Physico-chemical and antibacterial characteristics

Polyvinylchloride-blend-styrene butadiene rubber based nanocomposite cation exchange membranes were prepared by solution casting technique. Iron-oxide nanoparticles and Ag-nanolayer were simultaneously utilized as filler and surface modifier in membrane fabrication. The effects of Ag-nanolayer film thickness on membrane physicochemical and antibacterial characteristics of nanocomposite PVC-blend-SBR/Iron-oxide nanoparticles were studied. SEM images showed membrane roughness decreasing by Ag nanolayer thickness increasing. Membrane charge density and selectivity declined by Ag nanolayer coating up to 5 nm in membranes and then showed increasing trend by more nanolayer thickness. Ionic flux also showed increasing trend. Membranes showed good ability in E-Coli removal. 20 nm Ag-nanolayer coated membrane showed better performance compared to others.