Towards quantum reversible ternary coded decimal adder

Quantum ternary logic is a promising emerging technology for the future quantum computing. Ternary reversible logic circuit design has potential advantages over the binary ones like its logarithmic reduction in the number of qudits. In reversible logic all computations are done in an invertible fashion. In this paper, we propose a new quantum reversible ternary half adder with quantum cost of only 7 and a new quantum ternary full adder with a quantum cost of only 14. We termed it QTFA. Then we propose 3-qutrit parallel adders. Two different structures are suggested: with and without input carry. Next, we propose quantum ternary coded decimal (TCD) detector circuits. Two different approaches are investigated: based on invalid numbers and based on valid numbers. Finally, we propose the quantum realization of TCD adder circuits. Also here, two approaches are discussed. Overall, the proposed reversible ternary full adder is the best between its counterparts comparing the figures of merits. The proposed 3-qutrit parallel adders are compared with the existing designs and the improvements are reported. On the other hand, this paper suggested the quantum reversible TCD adder designs for the first time. All the proposed designs are realized using macro-level ternary Toffoli gates which are built on the top of the ion-trap realizable ternary 1-qutrit gates and 2-qutrit Muthukrishnan–Stroud gates.     

Critical rotational speed,critical velocity of fluid flow and free vibration analysis of a spinning SWCNT conveying viscous fluid

In this article, the influences of rotational speed and velocity of viscous fluid flow on free vibration behavior of spinning single-walled carbon nanotubes (SWCNTs) are investigated using the modified couple stress theory (MCST). Taking attention to the first-order shear deformation theory, the modeled rotating SWCNT and its equations of motion are derived using Hamilton’s principle. The formulations include Coriolis, centrifugal and initial hoop tension effects due to rotation of the SWCNT. This system is conveying viscous fluid, and the related force is calculated by modified Navier–Stokes relation considering slip boundary condition and Knudsen number. The accuracy of the presented model is validated with some cases in the literatures. Novelty of this study is considering the effects of spinning, conveying viscous flow and MCST in addition to considering the various boundary conditions of the SWCNT. Generalized differential quadrature method is used to approximately discretize the model and to approximate the equations of motion. Then, influence of material length scale parameter, velocity of viscous fluid flow, angular velocity, length, length-to-radius ratio, radius-to-thickness ratio and boundary conditions on critical speed, critical velocity and natural frequency of the rotating SWCNT conveying viscous fluid flow are investigated.     

Spectral characterization and ASTER-based lithological mapping of an ophiolite complex: A case study from Neyriz ophiolite, SW Iran

The Neyriz ophiolite occurs along the Zagros suture zone in SW Iran, and is part of a 3000-km obduction belt thrusting over the edge of the Arabian continent during the late Cretaceous. This complex typically consists of altered dunites and peridotites, layered and massive gabbros, sheeted dykes and pillow lavas, and a thick sequence of radiolarites. Reflectance and emittance spectra of Neyriz ophiolite rock samples were measured in the laboratory and their spectra were used as endmembers in a spectral feature fitting (SFF) algorithm. Laboratory spectral reflectance measurements of field samples showed that in the visible through shortwave infrared (VNIR-SWIR) wavelength region the ultramafic and gabbroic rocks are characterized by ferrous-iron and Fe, MgOH spectral features, and the pillow lavas and radiolarites are characterized by spectral features of ferric-iron and AlOH. The laboratory spectral emittance spectra also revealed a wide wavelength range of SiO spectral features for the ophiolite rock units. After continuum removal of the spectra, the SFF classification method was applied to the VNIR + SWIR 9-band stack, and to the 11-band data set of SWIR and TIR data sets of the Advanced Spaceborne Thermal Emission and Reflection Radiometer (ASTER) sensor, using field spectra as training sets for evaluating the potential of these data sets in discriminating ophiolite rock units. Output results were compared with the geological map of the area and field observations, and were assessed by the use of confusion matrices. The assessment showed, in terms of kappa coefficient, that the SFF classification method with continuum removal applied to the SWIR data achieved excellent results, which were distinctively better than those obtained using VNIR + SWIR data and TIR data alone.     

Array algorithms for H∞ estimation

We develop array algorithms for H^∞ filtering. These algorithms can be regarded as the Krein space generalizations of H ² array algorithms, which are currently the preferred method fur implementing H² filters. The array algorithms considered include two main families: square-root array algorithms, which are typically numerically more stable than conventional ones, and fast array algorithms which, when the system is time-invariant, typically offer an order of magnitude reduction in the computational effort. Both have the interesting feature that one does not need to explicitly check for the positivity conditions required for the existence of H^∞ filters, as these conditions are built into the algorithms themselves. However, since H^∞ square-root algorithms predominantly use J-unitary transformations, rather than the unitary transformations required in the H² case, further investigation is needed to determine the numerical behavior of such algorithms     

TEXEMS: texture exemplars for defect detection on random textured surfaces

We present an approach to detecting and localizing defects in random color textures which requires only a few defect free samples for unsupervised training. It is assumed that each image is generated by a superposition of various-size image patches with added variations at each pixel position. These image patches and their corresponding variances are referred to here as textural exemplars or texems. Mixture models are applied to obtain the texems using multiscale analysis to reduce the computational costs. Novelty detection on color texture surfaces is performed by examining the same-source similarity based on the data likelihood in multiscale, followed by logical processes to combine the defect candidates to localize defects. The proposed method is compared against a Gabor filter bank-based novelty detection method. Also, we compare different texem generalization schemes for defect detection in terms of accuracy and efficiency.     

Modeling industrial thickener using computational fluid dynamics (CFD), a case study: Tailing thickener in the Sarcheshmeh copper mine

Separation of particles from liquid in the large gravitational tanks is widely used in mining and industrial wastewater treatment process. Thickener is key unit in the operational processes of hydrometallurgy and is used to separate solid from liquid. In this study, population balance models were combined with computational fluid dynamics (CFD) for modeling the tailing thickener. Parameters such as feed flow rate, flocculant dosage, inlet solid percent and feedwell were investigated. CFD was used to simulate the industrial tailing thickener with settled bed of 120 m diameter which is located in the Sarcheshmeh copper mine. Important factor of drag force that defines the rake torque of rotating paddles on the bed was also determined. Two phases turbulence model of Eulerian/Eulerian in accordance with turbulence model of k-ε was used in the steady-state. Also population balance model consists of 15 groups of particle sizes with Luo and Lehr kernel was used for aggregation/breakage kernel. The simulation results showed good agreement with the operational data.     

Efficient biodegradation of naphthalene by a newly characterized indigenous Achromobacter sp. FBHYA2 isolated from Tehran Oil Refinery Complex

A bacterial strain, FBHYA2, capable of degrading naphthalene, was isolated from the American Petroleum Institute (API) separator of the Tehran Oil Refinery Complex (TORC). Strain FBHYA2 was identified as Achromobacter sp. based on physiological and biochemical characteristics and also phylogenetic similarity of 16S rRNA gene sequence. The optimal growth conditions for strain FBHYA2 were pH 6.0, 30 °C and 1.0% NaCl. Strain FBHYA2 can utilize naphthalene as the sole source of carbon and energy and was able to degrade naphthalene aerobically very fast, 48 h for 96% removal at 500 mg/L concentration. The physiological response of Achromobacter sp., FBHYA2 to several hydrophobic chemicals (aliphatic and aromatic hydrocarbons) was also investigated. No biosurfactant was detected during bacterial growth on any aliphatic/aromatic hydrocarbons. The results of hydrophobicity measurements showed no significant difference between naphthalene- and LB-grown cells. The capability of the strain FBHYA2 to degrade naphthalene completely and rapidly without the need to secrete biosurfactant may make it an ideal candidate to remediate polycyclic aromatic hydrocarbon (PAH)-contaminated sites.     

Dynamic hierarchical bandwidth allocation using Russian Doll Model in EPON

This paper demonstrates a new hierarchical Dynamic Bandwidth Allocation algorithm using the Russian Doll Model (RDM) to allocate bandwidth for intra-Optical Network Unit (ONU) in an Ethernet Passive Optical Network (EPON). The allocation of bandwidth is based on the classification and prioritization of service. The algorithm addresses the requests of ONUs and provides differentiated services by balancing priority and fairness. The simulation results show that the proposed algorithm performs well in supporting the triple-play services, i.e. video, voice, and data, as well as making effective adjustment in balancing bandwidth sharing between the ONUs compared with two other existing Dynamic Bandwidth Allocation (DBA) algorithm. The proposed algorithms shows significant performance improvements in terms of bandwidth utilization, packet delay and the fairness.     

Cluster Size Optimization in Sensor Networks with Decentralized Cluster-Based Protocols

Network lifetime and energy-efficiency are viewed as the dominating considerations in designing cluster-based communication protocols for wireless sensor networks. This paper analytically provides the optimal cluster size that minimizes the total energy expenditure in such networks, where all sensors communicate data through their elected cluster heads to the base station in a decentralized fashion. LEACH, LEACH-Coverage, and DBS comprise three cluster-based protocols investigated in this paper that do not require any centralized support from a certain node. The analytical outcomes are given in the form of closed-form expressions for various widely-used network configurations. Extensive simulations on different networks are used to confirm the expectations based on the analytical results. To obtain a thorough understanding of the results, cluster number variability problem is identified and inspected from the energy consumption point of view.