The effect of a periodic tangential magnetic field on the stability of a horizontal magnetic fluid sheet

The current article aims at investigating the effect of a periodic tangential magnetic field on the stability of a horizontal flat sheet. The media were considered porous, the three viscous‐fluid layers were initially streaming with uniform velocities, and the magnetic field admitted the presence of free‐surface currents. Furthermore, the transfer of mass and heat phenomenon was taken into account. The analysis, in this paper, was followed by the viscous potential theory. Moreover, the stability of the boundary‐value problem resulted in coupled second‐order linear differential equations with damping and complex coefficients. In regard to the uniform and periodic magnetic field, the standard normal mode approach was applied to deduce a general dispersion relation and judge the stability criteria. In addition, several unfamiliar cases were reported, according to appropriate data choices. The stability conditions were theoretically analyzed, and the influences of the various parameters in the stability profile were identified through a set of diagrams. In accordance wth the oscillating field, the coupled dispersion equations were combined to give the established Mathieu equation. Therefore, the governed transition curves were, theoretically, obtained. Finally, the results were numerically confirmed.     

Wear resistance of δ-type aluminafibre reinforced Al-4% Cu matrix composite

The wear behaviour of Al-4% Cu alloy and its composite containing-type alumina fibres has been studied at roomtemperature and at 150°C, using a standard pin-on-ringtribometer. The results show higher wear resistance and a lowercoefficient of friction for the composite material as comparedwith the matrix alloy. Three wear mechanisms of the matrix alloytested at room temperature were observed: oxidation-induceddelamination, seizure and subsequent wear due to surfacemelting. At 150°C, however, the matrix wear is due toseizure and melting. In the case of the composite material,different wear mechanisms were found: at low loads, oxidation-induced delamination was predominant, changing to high-strain-induced delamination at higher loads up to 80 N; at high loads(beyond 120 N) sub-surface delamination was the prevailingmechanism.     

Different Evolutions of the Microstructure,Texture, and Mechanical Performance During Tension and Compression of 316L Stainless Steel

Metallurgical and Materials Transactions A - The tensile and compressive behaviors of 316L stainless steel at room temperature were compared. The differences between the stress–strain...     

Erratum to: Quantum Confined Stark Effect and Temperature Dependencies of Photoluminescence of InAs Quantum Dots Coupled with AlGaAs/GaAs Two-Dimensional Electron Gas

Semiconductors - Later One of the co-authors, A.M. El Sayed withdrew his name as a co-author of this article claiming that he has not contributed to this work, since it is out of the scope of his...     

Enhanced fair earliest due date first scheduling strategy for multimedia applications in LTE downlink framework

Guaranteeing a certain delay threshold for delay‐sensitive applications in long term evolution (LTE) cellular communication system is a very challenging mission. By implementing an optimal scheduling strategy, this mission will be achieved. In this article, a novel scheduler is introduced in order to meet a predefined level of service quality by guaranteeing a specific delay threshold for delay‐sensitive applications in LTE cellular systems. The proposed scheduler assigns the available resource blocks (RBs) to active user equipments (UEs) tacking into consideration several attributes. The expiration date of each packet, the channel quality, the average data rate previously achieved by each UE, and the number of dropped packets for each UE compared with the average number of packets totally dropped are all considered in the proposed scheduler working mechanism. Consequently, the proposed scheduling strategy reduces the number of packets dropped for multimedia applications, and at the same time maximizes the overall throughput of the network. Simulation results are provided to study and evaluate the performance of the proposed scheduling strategy. A comparative study is presented between the proposed strategy and the most recent scheduling techniques. The obtained results prove that the proposed scheduling strategy has considerably acceptable and appreciated results compared with the results of the state‐of‐the‐art scheduling techniques.     

Apodized chirped fiber Bragg grating for postdispersion compensation in wavelength division multiplexing optical networks

In this paper, a postdispersion compensation unit is proposed leading to a better performance for the optical communication systems. This unit utilizes a chirped fiber Bragg grating (CFBG). For enhanced performance of the CFBG, a proper apodization function is chosen to improve the quality factor (Q‐factor) and the bit error rate (BER) of the system. A 110‐km wavelength division multiplexing (WDM) optical link is investigated. The system performance is evaluated through its Q‐factor, eye diagram, and BER showing best performance when using the Hamming apodization function.     

Computational intelligence techniques for human brain MRI classification

This study proposes an image classification methodology that automatically classifies human brain magnetic resonance (MR) images. The proposed methods contain four main stages: Data acquisition, preprocessing, feature extraction, feature reduction and classification, followed by evaluation. First stage starts by collecting MRI images from Harvard and our constructed Egyptian database. Second stage starts with noise reduction in MR images. Third stage obtains the features related to MRI images, using stationary wavelet transformation. In the fourth stage, the features of MR images have been reduced using principles of component analysis and kernel linear discriminator analysis (KLDA) to the more essential features. In last stage, the classification stage, two classifiers have been developed to classify subjects as normal or abnormal MRI human images. The first classifier is based on K‐Nearest Neighbor (KNN) on Euclidean distance. The second classifier is based on Levenberg‐Marquardt (LM‐ANN). Classification accuracy of 100% for KNN and LM‐ANN classifiers has been obtained. The result shows that the proposed methodologies are robust and effective compared with other recent works.     

Implementing and sustaining lean processes: the dilemma of societal culture effects

Lean processes allow the elimination of waste and the resulting improvements in productivity. However, implementing and sustaining lean processes are easier in some organisations than in others. There may be societal culture differences, as the successes in initial implementation in Japan have not been followed by global success. As organisations accelerate their lean efforts to gain or maintain competitive advantage, studying societal cultural effects seems timely. Understanding of the societal culture that the firm or subsidiary is operating in would be useful in determining how lean processes should lead the effort. Using the cultural dimensions developed by Hofstede, we examine the interconnection of societal culture and lean processes. For example, a societal emphasis on individualism is positively associated with a high level of lean process adoption, in terms of individual employee involvement, individual creativity and firm efficiency. A societal emphasis on high uncertainty avoidance is positively associated with a high level of lean process adoption, in terms of control and standardisation, efficiency and long-term philosophy. A societal emphasis on high power distance is positively associated with a high level of lean process adoption, in terms of control and standardisation, and efficiency. A long-term orientation in the society will be positively associated with a high level of lean process adoption, in terms of all of the dimensions. A societal emphasis on femininity will be positively associated with a high level of lean process adoption, in terms of employee involvement, creativity and long-term philosophy.     

Influence of preparation procedure and ferric oxide nanoparticles addition on transport properties of homogeneous cation-exchange SPPO/SPVC membrane

Homogeneous cation-exchange membranes were prepared through evaporation and phase inversion methods using sulfonated poly(2,6-dimethyl-1,4-phenylene oxide) (SPPO) and sulfonated polyvinylchloride as binders. The effect of polymers blend’s ratio and preparation method on structure and electrochemical properties of the prepared membranes were evaluated. The microstructures of the membranes were investigated by scanning electron microscopy (SEM) and the sulfonation of polyvinylchloride was confirmed by elemental analyses. Moreover, the membranes performance was evaluated by ion-exchange capacity (IEC), fixed ion concentration, membrane potential, transport number, permselectivity, areal resistance, ionic permeability, flux of ions, current efficiency, membrane oxidative stability, mechanical properties and water content tests. The results indicated that IEC and water content were affected by the SPPO content and microstructures of the membranes. The results showed increased efficiency and suitable electrochemical properties for membranes prepared by the evaporation method in comparison with others. Also, \(\hbox {Fe}_{2}\hbox {O}_{3}\) nanoparticles were synthesized at room temperature by a simple sonochemical reaction between ferric chloride and NaOH. The results revealed that the addition of different amounts of \(\hbox {Fe}_{2}\hbox {O}_{3}\) nanoparticles to the polymeric matrix could affect the hydrophilicity and transport properties of ion-exchange membranes.     

Determination of antioxidant activity of surface‐treated PET films coated with rosemary and clove extracts

Commercial PET films were surface treated and subsequently coated with either rosemary (RME) or clove (CE) extracts. Surface treatments involved (1) corona treatment, (2) chemical modification, and (3) plasma treatment. Radical scavenging activity (RSA) of both pure plant extracts and coated film extracts were determined using the 1,1‐diphenyl‐2‐picrylhydrazyl (DPPH) method. RME‐coated films showed a % RSA of 25.6%, 22.4%, and 24.1% for plasma, chemical modification, and corona treatment, respectively, at an extract concentration of 1402 ppm, respectively, while pure RME showed a %RSA of 16.0%. Respective %RSA values for CE were 25.0% for plasma, 25.2% for chemically modified, and 25.2% for corona‐treated films at 1402 ppm, while pure CE showed a %RSA of 47.6%. Thiobarbituric acid (TBA) test, performed on ground fish muscle wrapped in all types of employed films, showed a remarkable decrease in the degree of fish oxidation ranging between 50.0 and 80.0% after 6 days of storage. Contact angle measurements confirmed that surface chemically modified films had the highest adhesion strength followed by corona and plasma‐treated films. Scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FTIR), and X‐ray photoelectron spectroscopy (XPS) data also supported contact angle measurements. Finally, the oxygen permeability of surface‐treated films did not differ from untreated films indicating that surface treatment did not affect film barrier properties.