Seasonal and diurnal variation of PM2.5 apparent particle density in urban air in Augsburg, Germany

The apparent particle density of particulate matter with aerodynamic diameter < 2.5 microm (rho2.5) was determined at an urban site in Augsburg, Germany and its correlation with chemical composition and meteorological conditions was investigated. rho2.5 showed strong day-to-day variation from 1.05 to 2.36 g cm(-3) (5 to 95% percentile), and nearly 64% of the daily variability could be explained by a multiple variable regression model. A minimum in the morning and afternoon (about 1.5 g cm(-3)), and a maximum (near 1.8 g cm(-3)) during midday was observed. The minima represent fresh primary aerosol emissions, which were related to traffic soot particles with low density due to their agglomerate structure, especially observed in the early morning hours of weekdays. The maximum is likely due to increased secondary particle production and the presence of more aged particles with the built-up of the convectively mixed boundary layer. rho2.5 has the potential to serve as a crude tracer for chemical composition and atmospheric processing and might play an important role when considering the associations between health effects and ambient particles.     

Historical profiles of chlorinated paraffins and polychlorinated biphenyls in a dated sediment core from Lake Thun (Switzerland)

A dated sediment core from Lake Thun covering the last 120 years was analyzed to get an overview of the historical trend of the chlorinated paraffin (CP) and polychlorinated biphenyl (PCB) deposition, because CPs and PCBs have/had similar applications as plasticizers and flame retardants. Total CP concentrations (sum of short chain (SCCP), medium chain (MCCP), and long chain CPs (LCCP)) showed a steep increase in the 1980s and a more-or-less stable level of 50 ng g(-1) dry weight (dw) since then. The concentration-time profile is in good agreement with the available information on global production data. The quantification of higher chlorinated SCCPs using electron capture negative ionization low resolution mass spectrometry (ECNI-LRMS) revealed an increase in recent years. In addition, the degree of chlorination of SCCPs has strongly increased during the past 40 years, which may indicate its use as an additive for plastics, paints, and coatings. Furthermore, PCBs were analyzed in dated sediment slices. The PCB concentrations (sum of the six indicator congeners) peaked around 1969 (18 ng g(-1) dw) and decreased to 1.3 ng g(-1) dw in the surface layer corresponding to 2004. The peak level of CPs exceeded those of PCBs by about a factor of 3.     

Losses in GaInAs(P)/InP and GaAlSb(As)/GaSb lasers--The influence of the split-off valence band

GaInAs(P)/InP and GaAlSb(As)/GaSb are interesting material systems for long wavelength optical fiber communication. However lasers fabricated from these materials exhibit a substantially higher temperature dependence of the threshold current than GaAs/ GaAlAs lasers ("T0-problem"). lntervalence band absorption and CHSH-Auger-recombination have been suggested as two possible causes for the strong temperature dependent losses in long wavelength lasers. Both mechanisms, if present, should lead to a population of the split-off valence band. In GaInAsP/InP lasers, we have studied this population by directly observing the radiative high-energy recombination of electrons with holes in the split-off valence band. In the case of the band structure of GaAlSb(As), the band gap energy E0is close or equal to the spin-orbit splitting energy Δ0, which favors hole-Auger recombination and intervalence band absorption, as confirmed by our experimental results.     

Subpallidal outputs to the nucleus accumbens and the ventral tegmental area: anatomical and electrophysiological studies

The goal of this study was to investigate the functional organization of the subpallidal-->accumbens direct and indirect feedback loops by both anatomical and electrophysiological methods. The results of the dextran-conjugated rhodamine injections into the subpallidal area has shown three distinct projections: (1) a substantial pathway from the subpallidal area to the ventral tegmental area, (2) a more diffuse rostral projection from the subpallidal area to the core area of the nucleus accumbens, and (3) a sparse pathway projecting rostrodorsally from the subpallidal area toward the thalamic regions. Electrical or chemical stimulation of the subpallidal region, which was studied by the axonal tracer, evoked inhibitory responses in the majority (60 and 80%, respectively) of the accumbens and ventral tegmental area neurons in a standard extracellular recording study. Less than 1/3 of the accumbens or ventral tegmental area cells showed an increase in the mean firing rate. The majority (77.5%) of all responded neurons had a latency of less than 10 ms. Furthermore, injection of glutamate into the subpallidal area not only altered the firing pattern of the accumbens neurons, but also attenuated their excitatory responses elicited by the electrical stimulation of the ventral subiculum. Our results indicate that the subpallidal area plays a predominantly inhibitory role in the ventral tegmental area-accumbens-subpallidal circuitry, presumably by its GABAergic projections, and may also modulate subicular input into the nucleus accumbens.     

Semaphorins act as attractive and repulsive guidance signals during the development of cortical projections

Members of the semaphorin family have been implicated in mediating axonal guidance in the nervous system by their ability to collapse growth cones and to function as chemorepellents. The present findings show that recombinant Semaphorin D has similar effects on cortical axons and, in addition, inhibits axonal branching. In contrast, semaphorin E acts as an attractive guidance signal for cortical axons. Attractive effects were only observed when growth cones encountered increasing concentrations or a patterned distribution of Semaphorin E, but not when they are exposed to uniform concentrations of this molecule. Specific binding sites for Semaphorin D and Semaphorin E were present on cortical fibers both in vitro and in vivo at the time when corticofugal projections are established. In situ hybridization analysis revealed that the population of cortical neurons used in our experiments express neuropilin-1 and neuropilin-2, which are essential components of receptors for the class III semaphorins. Moreover, semD mRNA was detected in the ventricular zone of the neocortex whereas semE mRNA was restricted to the subventricular zone. Taken together, these results indicate that semaphorins are bifunctional molecules whose effects depend on their spatial distribution. The coordinated expression of different semaphorins, together with their specific activities on cortical axons, suggests that multiple guidance signals contribute to the formation of precise corticofugal pathways.     

Kinetic Analysis of Terminal and Unactivated C?H Bond Oxyfunctionalization in Fatty Acid Methyl Esters by Monooxygenase‐Based Whole‐Cell Biocatalysis

The alkane monooxygenase AlkBGT from Pseudomonas putida GPo1 constitutes a versatile enzyme system for the ω‐oxyfunctionalization of medium chain‐length alkanes. In this study, recombinant Escherichia coli W3110 expressing alkBGT was investigated as whole‐cell catalyst for the regioselective biooxidation of fatty acid methyl esters to terminal alcohols. The ω‐functionalized products are of general economic interest, serving as building blocks for polymer synthesis. The whole‐cell catalysts proved to functionalize fatty acid methyl esters with a medium length alkyl chain specifically at the ω‐position. The highest specific hydroxylation activity of 104 U g_CDW⁻¹ was obtained with nonanoic acid methyl ester as substrate using resting cells of E. coli W3110 (pBT10). In an optimized set‐up, maximal 9‐hydroxynonanoic acid methyl ester yields of 95% were achieved. For this specific substrate, apparent whole‐cell kinetic parameters were determined with a V_max of 204±9 U g_CDW⁻¹, a substrate uptake constant (K_S) of 142±17 μM, and a specificity constant V_max/K_S of 1.4 U g_CDW⁻¹ μM ⁻¹ for the formation of the terminal alcohol. The same E. coli strain carrying additional alk genes showed a different substrate selectivity. A comparison of biocatalysis with whole cells and enriched enzyme preparations showed that both substrate availability and enzyme specificity control the efficiency of the whole‐cell bioconversion of the longer and more hydrophobic substrate dodecanoic acid methyl ester. The efficient coupling of redox cofactor oxidation and product formation, as determined in vitro, combined with the high in vivo activities make E. coli W3110 (pBT10) a promising biocatalyst for the preparative synthesis of terminally functionalized fatty acid methyl esters.     

Synthesis of structured triglycerides from peanut oil with immobilized lipase

Structured triglycerides (ST) that contain medium- and long-chain fatty acids were synthesized by lipase-catalyzed interesterification between tricaprylin and peanut oil. To select appropriate enzymes, we investigated nine commercial lipase preparations for their ability to hydrolyze pure triglycerides as well as natural oils. Three microbial lipases from Rhizomucor miehei (RML), Candida sp. (CSL), and Chromobacterium viscosum (CVL) gave good results, and immobilized preparations were used in the interesterification. RML gave the highest yields of ST (73%, 40°C), although its hydrolytic activity toward triolein was low. As the temperature was raised to 50°C, the yield of ST increased to 79%. After 120 h reaction time, remaining activities were high for CSL (71%), moderate for CVL (48%), and low for RML (20%). Parts of this paper were presented as a poster at the Biochemical Engineering Conference IX, May 1995, Davos, Switzerland.     

Wood‐Plastic‐Composites: Rheologische Charakterisierung und Füllverhalten im Spritzgießprozess

Wood‐plastic composites (WPC) show a complex and completely different material and flow behavior in comparison to pure polymers. Especially the flow behavior is very important for the processing of these composites. In the following article results of rheological characterization and investigations of the filling behavior during the injection molding process are presented. Furthermore, appearing challenges and possible methods of resolution are discussed.     

Post‐protection effect of heat‐resistant insulations on timber‐frame members exposed to fire

In lightweight walls and floors, the load‐bearing timber members are protected by cladding on the sides to form a divider between two fire compartments or to provide appropriate fire protection to the load‐bearing members. The spaces between the timber members can be void or filled with insulation materials. Although a huge number of different insulation materials exist, the most commonly used material is mineral wool insulation. The existing design model for glass wool‐insulated timber‐frame constructions, given in European standard 1995‐1‐2, assumes collapse of the glass wool after failure of the cladding. However, a new form of glass wool insulation, suitable for use at high maximum service temperatures, is now available in the market. The charring phase after the cladding's failure is known as the post‐protection phase. The behaviour of the new heat‐resistant glass wool in the post‐protection phase is similar to that of stone wool and considerably better than that of traditional glass wool. The protective properties of stone wool have changed over the last decades. Charring is one of the main parameters needed to calculate the resistance of a structure to fire. Based on experimental investigations, this paper describes the analysis of the effect of the insulation with regard to its ability to protect timber members against charring during the post‐protection phase. Copyright © 2011 John Wiley & Sons, Ltd.     

Developments in and practical guidelines for tip-enhanced Raman spectroscopy

This feature review provides an overview of the state-of the art and recent developments in tip-enhanced Raman spectroscopy (TERS), in-depth information about the different available types of instruments including their (dis-)advantages and capabilities as well as a short glance at a number of samples that have recently been investigated using TERS. Issues concerning the progression of TERS from point spectroscopy to an imaging technique are discussed, as well as problems arising from background and contamination signals. This review is concluded with a short TERS 'user guideline', trying to aid researchers new in the field to properly align and test their own TERS setups. Finally, a short outlook is given and some critical issues are raised that need to be solved by the community sooner or later, in order to promote TERS towards a 'push-button' operation.