Quasi‐Static Single‐Component Hybrid Simulation of a Composite Structure with Multi‐Axis Control

This paper presents a quasi‐static hybrid simulation performed on a single component structure. Hybrid simulation is a substructural technique, where a structure is divided into two sections: a numerical section of the main structure and a physical experiment of the remainder. In previous cases, hybrid simulation has typically been applied to structures with a simple connection between the numerical model and physical test, e.g. civil engineering structures. In this paper, the method is applied to a composite structure, where the boundary is more complex i.e. 3 degrees of freedom. In order to evaluate the validity of the method, the results are compared to a test of the emulated structure – referred to here as the reference test. It was found that the error introduced by compliance in the load train was significant. Digital image correlation was for this reason implemented in the hybrid simulation communication loop to compensate for this source of error. Furthermore, the accuracy of the hybrid simulation was improved by compensating for communication delay. The test showed high correspondence between the hybrid simulation and the reference test in terms of overall deflection as well as displacements and rotation in the shared boundary.     

Influence of vanadium concentration on the microstructure and magnetic properties of V-doped ZnO thin films

Vanadium doped ZnO thin films (Zn_1 − xV_xO, where x = 0.05 or x = 0.13) were grown on c-cut sapphire substrates using pulsed laser deposition technique. Their structure and magnetic properties were examined in relation to the doping concentration. All deposited films were highly oriented along the c-axis and exhibited ferromagnetic behavior with a Curie temperature up to 300 K. The crystal structure was found to be better for layers with lower vanadium concentration. The films had a porous fine-grained microstructure and a column-like character as the V concentration was reduced. A weak dependence of magnetization on temperature was observed. The saturation magnetization was found to be strongly dependent on the crystal structure, grain size and V-ion concentration.     

Gravity Induced Absorption Changes in <Emphasis Type=Italic>Phycomyces blakesleanus</Emphasis> and Coleoptiles of <Emphasis Type=Italic>Zea mays</Emphasis> as Measured on the Drop Tower in Bremen (FRG)

Various spectroscopic experiments performed on the AIRBUS ZERO G in the years 2002 to 2007 clearly exhibited optical reflection changes as a result of gravitational changes (GIAC = Gravity Induced Absorption Change) in Phycomyces sporangiophores and corn coleoptiles. GIACs that occurred during flight parabolas in response to hyper- and microgravity were detected by a micro dual wavelength spectrometer (MDWS) for wavelengths pairs in the visible and the near infrared. We assume that GIACs indicate redox-changes of electron transport components such as flavins and cytochromes. Because microgravity on the AIRBUS 300 ZERO G only amounts to moderate values of ±4 ×10^− 2 g, i.e. far below sensitivity of the MDWS, we performed an experiment on the drop tower in Bremen (Germany) that generates microgravity as low as 4 ×10^− 5 g for 4.7 s. We detected small but significant GIACs during the microgravity phase, different in various specimen.     

The role of microcrystalline structure on optical scattering characteristics of semi-crystalline thermoplastics and the accuracy of numerical input for IR-heating modeling

Infrared (IR) heating is widely used for thermoforming of thermoplastic polymers. The key benefit of radiation heating is that a significant amount of the radiative energy penetrates into the polymers thanks to their semi-transparency. For the case of heating unfilled semi-crystalline polymers, the relation between their microcrystalline structure and optical properties is the key to develop a predictive IR-heating model as microcrystalline structure introduces an optically heterogeneous medium. In this study, a relation between the microcrystalline structure of a polyethylene (PE) and its effect on the thermo-optical properties was experimentally analyzed considering a two-step analysis. At very first step, the relation was analyzed considering samples with identical thicknesses and different morphologies, characterized here in terms of degree of crystallinity (X_c (%)). Using Fourier Transform Infrared (FT-IR) spectroscopy and integrating sphere, optical characteristics of the PE samples were analyzed in near-infrared (NIR) and middle-infrared (MIR) spectral ranges. The analyses showed that a slight variation in X_c (%) has a great effect on the optical characteristics of PE, particularly the transmission characteristics in NIR range. The wavelength-dependent effect of X_c (%) on the transmission behaviors opened a discussion about the fact that the microcrystalline structures -in particular spherulites or their substructures such as lamellae- are responsible for optical scattering. Using the optical properties obtained from the two-step experimental analyses, two different thermo-optical properties were calculated, namely extinction and absorption coefficients, and used as a numerical input for the parametric numerical studies. The numerical studies were performed using an in-house developed radiation heat transfer algorithm -RAYHEAT-. Both the experimental and numerical analyses demonstrated the importance of the optical scattering regarding the identification of thermo-optical properties, used as a numerical input for radiation heat transfer models.     

Numerical modeling of flow in a differential chamber of the gas-dynamic interface of a portable mass-spectrometer

Mathematical modeling of flow in the differential chamber of the gas-dynamic interface of a portable mass-spectrometer was carried out to comprehensively study the flow structure and make recommendations for the optimization of the gas-dynamic interface. Modeling was performed using an OpenFOAM open computational platform. Conditions for an optimal operating mode of the differential chamber were determined.     

Radiation-hardness studies of high OH content quartz fibres irradiated with 500 MeV electrons

We investigated the darkening of nine high OH⁻ fibre types irradiated with 500 MeV electrons from the Linac Injector of LEP (LIL) at CERN. The transmission of Xe light was measured in situ in the 350–800 nm range. The induced attenuation at 450 nm is typically 1.52±0.15 dB/m for a 100 Mrad absorbed dose. Two-parameter fits for darkening and recovery are presented. After irradiation the tensile strength remains essentially unchanged. For Polymicro quartz core fibres the tensile strength is typically 4.6±0.4 GPa.     

Increase in Generation of Poly-Crystalline Silicon by Atmospheric Pressure Plasma-Assisted Excimer Laser Annealing

In this work, a novel atmospheric pressure plasma-assisted excimer laser annealing method for increasing the generation efficiency of poly-crystalline silicon from amorphous silicon layers is presented. Here, both the plasma and the laser propagate coaxially in order to generate energetic synergies. The influence of different process gases and plasma discharge modes as well as the working distance were investigated. Depending on the particularly applied plasma, the crystalline area was increased by a factor of approx. 1.1 to 1.9, where the highest efficiency was observed when introducing an argon plasma beam to the annealing process.     

Validation of an Alternative Method for Testing the Chemical Compatibility of Liquids with Polyethylene Packagings for Dangerous Goods

Safety risks may ensue when the chemicals contained in polyethylene packagings ^a age and damage them. To prevent subsequent accidents, the European Dangerous Goods Regulations have laid down requirements for testing the chemical compatibility of liquid dangerous goods transported in polyethylene packagings. The test procedures include 6 months in which the chemical is prestored in the packaging. After this time, the respective design‐type tests are performed. Alternative methods with so‐called standard liquids, simulating the different types of damaging effects, are also possible. If a packaging has successfully passed the design type tests with a standard liquid, other dangerous goods may also be transported in this packaging, as long as it is demonstrated that they have a less damaging effect than the standard liquid. However, in this area there is only little information and research available. A new potentially effective and time‐saving method for comparing the stress crack damaging influence of liquids with standard liquids was proposed by a major German chemical company. The validation of this method, which was carried out on two polyethylene materials, showed the general applicability of the method. Two kinds of wetting solutions were applied to simulate cracking under stress. The influence of prestorage, test temperatures, wetting agents and material was examined. FEM calculations were carried out to ascertain the influence of the sample shape. Copyright © 2012 John Wiley & Sons, Ltd.