Energy Efficiency Trade-Off Between Duty-Cycling and Wake-Up Radio Techniques in IoT Networks

Wireless Personal Communications - For robust monitoring, control and proper energy management of renewable energy sources (RES), wireless sensing networks (WSNs) are proved to be a vital solution....     

Modular and Versatile Spatial Functionalization of Tissue Engineering Scaffolds through Fiber‐Initiated Controlled Radical Polymerization

Native tissues are typically heterogeneous and hierarchically organized, and generating scaffolds that can mimic these properties is critical for tissue engineering applications. By uniquely combining controlled radical polymerization (CRP), end‐functionalization of polymers, and advanced electrospinning techniques, a modular and versatile approach is introduced to generate scaffolds with spatially organized functionality. Poly‐ε‐caprolactone is end functionalized with either a polymerization‐initiating group or a cell‐binding peptide motif cyclic Arg‐Gly‐Asp‐Ser (cRGDS), and are each sequentially electrospun to produce zonally discrete bilayers within a continuous fiber scaffold. The polymerization‐initiating group is then used to graft an antifouling polymer bottlebrush based on poly(ethylene glycol) from the fiber surface using CRP exclusively within one bilayer of the scaffold. The ability to include additional multifunctionality during CRP is showcased by integrating a biotinylated monomer unit into the polymerization step allowing postmodification of the scaffold with streptavidin‐coupled moieties. These combined processing techniques result in an effective bilayered and dual‐functionality scaffold with a cell‐adhesive surface and an opposing antifouling non‐cell‐adhesive surface in zonally specific regions across the thickness of the scaffold, demonstrated through fluorescent labelling and cell adhesion studies. This modular and versatile approach combines strategies to produce scaffolds with tailorable properties for many applications in tissue engineering and regenerative medicine.     

Efficiency of Light Outcoupling Structures in Organic Light‐Emitting Diodes: 2D TiO2 Array as a Model System

Organic light‐emitting diodes (OLEDs) are widely used in research and are established in the industry. The building block nature of organic compounds enables a vast variety of materials. On top of that, there exist many strategies to improve the light outcoupling of OLEDs making a direct comparison of outcoupling technologies difficult. Here, a novel approach is introduced for the evaluation of light outcoupling structures. The new defined “efficiency of light outcoupling structures” (ELOS) clearly determines the effectiveness of the light outcoupling structure by weighting the experimental efficiency enhancement over the theoretical outcoupling gain. It neither depends on cavity design nor on the chosen organic material. The methodology is illustrated for red phosphorescent OLEDs comprising internal and external light outcoupling structures. Assumptions and further uses are discussed with respect to experimental and theoretical handling. In addition, the ELOS is calculated for various outcoupling techniques from literature to demonstrate the universality. Finally, most suitable reference OLEDs are discussed for application of light outcoupling structures. The presented approach enables new possibilities for studying light outcoupling structures and improves their comparability in a highly material‐driven research field.     

Liquid–Liquid Diffusion‐Assisted Crystallization: A Fast and Versatile Approach Toward High Quality Mixed Quantum Dot‐Salt Crystals

Here, a new, fast, and versatile method for the incorporation of colloidal quantum dots (QDs) into ionic matrices enabled by liquid–liquid diffusion is demonstrated. QDs bear a huge potential for numerous applications thanks to their unique chemical and physical properties. However, stability and processability are essential for their successful use in these applications. Incorporating QDs into a tight and chemically robust ionic matrix is one possible approach to increase both their stability and processability. With the proposed liquid–liquid diffusion‐assisted crystallization (LLDC), substantially accelerated ionic crystallization of the QDs is shown, reducing the crystallization time needed by one order of magnitude. This fast process allows to incorporate even the less stable colloids including initially oil‐based ligand‐exchanged QDs into salt matrices. Furthermore, in a modified two‐step approach, the seed‐mediated LLDC provides the ability to incorporate oil‐based QDs directly into ionic matrices without a prior phase transfer. Finally, making use of their processability, a proof‐of‐concept white light emitting diode with LLDC‐based mixed QD‐salt films as an excellent color‐conversion layer is demonstrated. These findings suggest that the LLDC offers a robust, adaptable, and rapid technique for obtaining high quality QD‐salts.     

Contiguous and Atomically Thin Pt Film with Supra‐Bulk Behavior Through Graphene‐Imposed Epitaxy

The nature of the atomic configuration and the bonding within epitaxial Pt‐graphene films is investigated. Graphene‐templated monolayer/few‐multilayers of Pt, synthesized as contiguous 2D films by room temperature electrochemical methods, is shown to exhibit a stable {100} structure in the 1–2 layer range. The fundamental question being investigated is whether surface Pt atoms rendered in these 2D architectures are as stable as those of their bulk Pt counterparts. Unsurprisingly, a single layer Pt on the graphene (Pt_1ML/GR) shows much larger Pt dissociation energy (?7.51 eV) than does an isolated Pt atom on graphene. However, the dissociation energy from Pt_1ML/GR is similar to that of bulk Pt(100), ?7.77 eV, while in bi‐layer Pt on the graphene (Pt_2ML/GR), this energy changes to ?8.63 eV, surpassing its bulk counterpart. At Pt_2ML/GR, the dissociation energy also slightly surpasses that of bulk Pt(111). Bulk‐like stability of atomically thin Pt–graphene results from a combination of interplanar Pt? C covalent bonding and inter/intraplanar metallic bonding. This unprecedented stability is also accompanied by a metal‐like presence of electronic states at the Fermi level. Such atomically thin metal‐graphene architectures can be a new stable platform for synthesizing 2D metallic films with various applications in catalysis, sensing, and electronics.     

Antenna Array Designs for OFDM WLAN Indoor Transmission

Wireless local area networks (WLAN??s) based on the 802.11 standards are ubiquitous. However, the popularity of WLAN??s has made interference between WLAN users an issue. Spatial division multiple access (SDMA) is one way to orthogonalize these users and reduce interference. The contribution of this paper is to use real antenna array prototypes to determine the best array design for implementing indoor SDMA. Two SDMA antenna array prototypes are constructed and used to collect propagation measurements in an indoor environment. The propagation data is then incorporated into an SDMA orthogonal frequency division multiplexing (OFDM) analysis. This approach is able to very accurately predict how the two array designs will influence SDMA-OFDM performance in the indoor environment where the measurements are collected. The results indicate that the compact sectorized antenna array prototype performs better than the linear array prototype for in-room communication and that the reverse is true for inter-room communication.     

Intensity dependent but temperature independent charge carrier generation in organic photodiodes and solar cells

Measurements of the transient photoresponse of organic photodiodes and solar cells show a strong saturation effect in the quantum efficiency at laser fluences above approximately 3.3 μJ/cm². By a comparison of the measured intensity, temperature and field dependence of the transient pulse responses with extended drift–diffusion simulations, the loss of charge carriers can be traced back to a quadratic loss channel in the charge carrier generation process. In contrast to the predictions of the commonly used Onsager–Braun charge carrier generation model, we demonstrate that the dissociation of bound electron–hole-pairs is temperature independent but slightly field dependent.     

Ortho‐ vs Bay‐Functionalization: A Comparative Study on Tetracyano‐Terrylenediimides

In this paper n‐type semiconductors synthesized via selective fourfold cyanation of the ortho‐ and bay‐positions (2,5,10,13‐ and 1,6,9,14‐positions respectively) of teyrrylenediimides are reported. A detailed study about the impact of the diverse functionalization topologies on the optoelectronic properties, self‐organization from solution, solid‐state packing, and charge carrier transport in field‐effect transistors is presented. The ortho‐substitution preserves the planarity of the core and favors high order in solution processed films. However, the strong intermolecular interactions lead to a microstructure with large aggregates and pronounced grain boundaries which lower the charge carrier transport in transistors. In contrast, the well‐soluble bay‐functionalized terrylenediimide forms only disordered films which surprisingly result in n‐type average mobilities of 0.17 cm²/Vs after drop‐casting with similar values in air. Processing by solvent vapor diffusion enhances the transport to 0.65 cm²/Vs by slight improvement of the order and surface arrangement of the molecules. This mobility is comparable to highest n‐type conductivities measured for solution processed PDI derivatives demonstrating the high potential of TDI‐based semiconductors.