Injection molding of products with functional surfaces by micro-structured, PVD coated injection molds

Molding of micro structures by injection molding leads to special requirements for the molds e.g. regarding wear resistance and low release forces of the molded components. At the same time it is not allowed to affect the replication precision. Physical vapor deposition (PVD) is one of the promising technologies for applying coatings with adapted properties like high hardness, low roughness, low Young’s modulus and less adhesion to the melt of polymers. Physical vapor deposition technology allows the deposition of thin films on micro structures. Therefore, the influence of these PVD layers on the contour accuracy of the replicated micro structures has to be investigated. For this purpose injection mold inserts were laser structured with micro structures of different sizes and afterwards coated with two different coatings, which were deposited by a magnetron sputter ion plating PVD technology. After deposition, the coatings were analyzed by techniques regarding hardness, Young’s modulus and morphology. The geometries of the micro structures were analyzed by scanning electron microscopy before and after coating. Afterwards, the coated mold inserts were used for injection molding experiments. During the injection molding process, a conventional and a variothermal temperature control of the molds were used. The molded parts were analyzed regarding roughness, structure height and structure width by means of laser microscopy.     

Ant algorithms and simulated annealing for multicriteria dynamic programming

The paper presents a comparison of ant algorithms and simulated annealing as well as their applications in multicriteria discrete dynamic programming. The considered dynamic process consists of finite states and decision variables. In order to describe the effectiveness of multicriteria algorithms, four measures of the quality of the nondominated set approximations are used.     

Reoptimization of the Shortest Common Superstring Problem

A reoptimization problem describes the following scenario: given an instance of an optimization problem together with an optimal solution for it, we want to find a good solution for a locally modified instance.     

Mathematical programs with complementarity constraints in the context of inverse optimal control for locomotion

In this paper an inverse optimal control problem in the form of a mathematical program with complementarity constraints (MPCC) is considered and numerical experiences are discussed. The inverse optimal control problem arises in the context of human navigation where the body is modelled as a dynamical system and it is assumed that the motions are optimally controlled with respect to an unknown cost function. The goal of the inversion is now to find a cost function within a given parametrized family of candidate cost functions such that the corresponding optimal motion minimizes the deviation from given data. MPCCs are known to be a challenging class of optimization problems typically violating all standard constraint qualifications (CQs). We show that under certain assumptions the resulting MPCC fulfills CQs for MPCCs being the basis for theory on MPCC optimality conditions and consequently for numerical solution techniques. Finally, numerical results are presented for the discretized inverse optimal control problem of locomotion using different solution techniques based on relaxation and lifting.     

Rapid evaluation of long-term thermal degradation of carbon fibre epoxy composites

Two commercially available carbon fibre reinforced composites (8552/IM7 and M18-1/G939) were exposed to heat above maximum operational temperature at various durations. Mass loss and mechanical properties were measured over time. A chemical analysis was also performed on these composites. The two primary components of each matrix, the epoxy resin and the thermoplastic, were observed to degrade at different rates under various thermal loading conditions. The epoxy resins degrade predominantly as measured by IR spectroscopy and thermal desorption/gas chromatography mass spectrometry. By using mass loss, strength, and IR spectroscopic data, a correlation was made between strength characteristics of each composite and the relative amount of the two primary matrix components. The developed relationship can be used to estimate rapidly the mechanical properties from the intensity ratio of IR bands characteristic of the two components.     

China’s ‘old’ and ‘new’ Mekong River politics: the Lancang-Mekong Cooperation from a comparative benefit-sharing perspective

This article analyzes China’s Mekong River politics before and after the establishment of the Lancang-Mekong Cooperation (LMC) from a comparative benefit-sharing perspective. China’s pre-LMC approach focused too much on the creation of economic benefits from and beyond the river while neglecting ecological benefits to the river. Moreover, despite the problems this ‘old’ approach caused for China and its downstream neighbours, China’s current LMC strategy seems to essentially replicate its former approach. While sustainable water resources management is identified as a priority area, actual cooperation and benefit sharing in this field remain insufficient.     

A Novel Formalism for Partially Defined Asynchronous Feedback Digital Circuits

In contrast to combinational logic and master clocked sequential logical, asynchronous feedback circuits are partially defined due to analogous meta-stabilities. We present a novel formalism to exactly explore this digitally assisted analog phenomenon in order to build up a representative test bench that is able to enforce race constraints (meta-stable behavior) for non-deterministics, instabilities as well as for oscillations in feedback structures. Further, we introduce our definitions for consistently modeling under state transition graphs, we provide all entities for modeling asynchronous feedback structures and state our proposed methodology with an exemplary asynchronous circuitry. The given example is explained at a high level of abstraction, all data for revision is provided, too. The approach seems to be capable to test for meta-stabilities, analog behavior in feedback digital structures.     

Acousto-capacitive tomography of liquid multiphase systems

This paper discusses a tomographic approach focusing on ultrasonic measurements to monitor liquid multiphase mixtures. Separately a capacitive tomography low-cost setup is regarded. Both sensor arrays aim for the localization of variable phase boundaries and the physical characterisation of spatially distributed phases. Focusing on a real time processing, a reduced number of transducers in combination with a fast linear modelling and direct image reconstruction methods are used. Experimental results of a layered 3-phase-system validate the potential and limits of physical resolution of both approaches. Finally, the prospectively intended data fusion of both approaches is discussed.