Sensitization of MCF7 Cells with High Notch1 Activity by Cisplatin and Histone Deacetylase Inhibitors Applied Together

Histone deacetylase inhibitors (HDIs) are promising anti-cancer agents that inhibit proliferation of many types of cancer cells including breast carcinoma (BC) cells. In the present study, we investigated the influence of the Notch1 activity level on the pharmacological interaction between cisplatin (CDDP) and two HDIs, valproic acid (VPA) and suberoylanilide hydroxamic acid (SAHA, vorinostat), in luminal-like BC cells. The type of drug–drug interaction between CDDP and HDIs was determined by isobolographic analysis. MCF7 cells were genetically modified to express differential levels of Notch1 activity. The cytotoxic effect of SAHA or VPA was higher on cells with decreased Notch1 activity and lower for cells with increased Notch1 activity than native BC cells. The isobolographic analysis demonstrated that combinations of CDDP with SAHA or VPA at a fixed ratio of 1:1 exerted additive or additive with tendency toward synergism interactions. Therefore, treatment of CDDP with HDIs could be used to optimize a combined therapy based on CDDP against Notch1-altered luminal BC. In conclusion, the combined therapy of HDIs and CDDP may be a promising therapeutic tool in the treatment of luminal-type BC with altered Notch1 activity.     

X-ray Fluorescence Uptake Measurement of Functionalized Gold Nanoparticles in Tumor Cell Microsamples

Quantitative cellular in vitro nanoparticle uptake measurements are possible with a large number of different techniques, however, all have their respective restrictions. Here, we demonstrate the application of synchrotron-based X-ray fluorescence imaging (XFI) on prostate tumor cells, which have internalized differently functionalized gold nanoparticles. Total nanoparticle uptake on the order of a few hundred picograms could be conveniently observed with microsamples consisting of only a few hundreds of cells. A comparison with mass spectroscopy quantification is provided, experimental results are both supported and sensitivity limits of this XFI approach extrapolated by Monte-Carlo simulations, yielding a minimum detectable nanoparticle mass of just 5 pg. This study demonstrates the high sensitivity level of XFI, allowing non-destructive uptake measurements with very small microsamples within just seconds of irradiation time.     

Comparison of antimicrobial resistance of Campylobacter jejuni and Campylobacter coli isolated from humans and chicken carcasses in Poland

Campylobacter-associated gastroenteritis remains an important cause of morbidity worldwide, and some evidence suggests that poultry is an important source of this foodborne infection in humans. This study was conducted to analyze the prevalence and genetic background of resistance of 149 Campylobacter jejuni and 54 Campylobacter coli strains isolated from broiler chicken carcasses and from stool samples of infected children in Poland from 2003 through 2005. Nearly all isolates were susceptible to macrolides and aminoglycosides. The highest resistance in both human and chicken strains was observed for ciprofloxacin (more than 40%), followed by ampicillin (13 to 21%), and tetracycline (8 to 29%). Resistance to ampicillin and tetracycline rose significantly between 2003 and 2005. Slight differences in resistance between human and chicken isolates indicate that although chicken meat is not the only source of Campylobacter infection in our population, it can be involved in the transmission of drug-resistant Campylobacter strains to humans.     

Environmental history of one of the largest freshwater neotropical fish (Zungaro jahu) from otolith isotopic analysis

The Manguruyú Zungaro jahu, endemic to the La Plata Basin, is one of the largest neotropical fish species whose life history is virtually unknown. The objectives of this study were to determine if Z. jahu is a large-scale migratory species and to describe habitat use throughout ontogeny using the otolith Sr isotope (⁸⁷Sr/⁸⁶Sr) ratio. Surface water samples were collected in 2020 at four sites representing the main water courses of the Great Pantanal in Brazil (upper Paraguay, Cuiabá, São Lourenço and Vermelho rivers). Eighteen fish individuals were collected from the Paraná River (Argentina). New water ⁸⁷Sr/⁸⁶Sr data were incorporated into previously established statistical models to infer the fish habitat use through the otolith ⁸⁷Sr/⁸⁶Sr ratios. The water ⁸⁷Sr/⁸⁶Sr ratio of the upper Paraguay tributaries varied (0.7209 and 0.7229) and were the highest in the La Plata Basin. The dispersal area of Z. jahu was restricted to the surroundings of the confluence of the Paraná and Paraguay rivers. Fish showed chemical signatures compatible with those of the middle Paraná (88%), Paraguay-Pilcomayo-Bermejo (50%) and the lower/upper Paraná (66%). The discriminant analysis based on otolith core indicated natal origins from the middle Paraná (37%), upper Paraná (32%), and Paraguay sub-basin (32%). The dispersal area of Z. jahu migrations could be restricted to the surroundings of the confluence of Paraná and Paraguay, which highlights the need to review regional fishing regulations, especially between latitudes 30°–34° S.     

Simulation of an air conditioning absorption refrigeration system in a co-generation process combining a proton exchange membrane fuel cell

In this work, a computer simulation program was developed to determine the optimum operating conditions of an air conditioning system during the co-generation process. A 1 kW PEMFC was considered in this study with a chemical/electrical theoretical efficiency of 40% and a thermal efficiency of 30% applying an electrical load of 100%. A refrigeration-absorption cycle (RAC) operating with monomethylamine–water solutions (MMA–WS), with low vapor generation temperatures (up to 80 °C) is proposed in this work. The computer simulation was based on the refrigeration production capacity at the maximum power capacity of the PEMFC. Heat losses between the fuel cell and the absorption air conditioning system at standard operating conditions were considered to be negligible. The results showed the feasibility of using PEMFC for cooling, increasing the total efficiency of the fuel cell system.     

Energy efficient office buildings with passive cooling – Results and experiences from a research and demonstration programme

To gain access to information on energy use in office buildings, the German Federal Ministry for Economy launched an intensive research and demonstration programme in 1995. In advance of the 2002 EU energy performance directive a limited primary energy coefficient of about 100 kW h m⁻² a⁻¹ as a goal for the complete building services technology was postulated (HVAC + lighting) for all demonstration buildings to be supported. A further condition was that active cooling be avoided. Techniques such as natural or mechanical night ventilation or heat removal by slab cooling with vertical ground pipes as well as earth-to-air heat exchangers in the ventilation system were applied. An accompanying research was established to keep track of the results and the lessons learned from about 22 demonstration buildings realized and monitored until the end of 2005. As one outcome this paper summarises the energy performance of a selection of characteristic buildings together with an overview on the summer thermal comfort situations achieved. The research program will proceed during the next five years. Detailed reports and future results may be downloaded from the internet: www.enbau-monitor.de.     

Evaluation of Crop Models for Simulating and Optimizing Deficit Irrigation Systems in Arid and Semi-arid Countries Under Climate Variability

The variability of fresh water availability in arid and semi-arid countries poses a serious challenge to farmers to cope with when depending on irrigation for crop growing. This has shifted the focus onto improving irrigation management and water productivity (WP) through controlled deficit irrigation (DI). DI can be conceived as a strategy to deal with these challenges but more knowledge on risks and chances of this strategy is urgently needed. The availability of simulation models that can reliably predict crop yield under the influence of soil, atmosphere, irrigation, and agricultural management practices is a prerequisite for deriving reliable and effective deficit irrigation strategies. In this context, this article discusses the performance of the crop models CropWat, PILOTE, Daisy, and APSIM when being part of a stochastic simulation-based approach to improve WP by focusing primarily on the impact of climate variability. The stochastic framework consists of: (i) a weather generator for simulating regional impacts of climate variability; (ii) a tailor-made evolutionary optimization algorithm for optimal irrigation scheduling with limited water supply; and (iii) the above mentioned models for simulating water transport and crop growth in a sound manner. The results present stochastic crop water production functions (SCWPFs) that can be used as basic tools for assessing the impact on the risk for the potential yield due to water stress and climate variability. Example simulations from India, Malawi, France and Oman are presented and the suitability of these crop models to be employed in a framework for optimizing WP is evaluated.     

Numerical analysis of the effect of different gas feeding modes in a proton exchange membrane fuel cell with serpentine flow-field

In this work we present a 3D computational model of a proton exchange membrane fuel cell (PEMFC) to investigate the effect of employing different modes of gas feeding on distributions. The model is based on a commercial fuel cell with serpentine flow-field. From a rigorous analysis of species concentration, current density and ionic conductivity distributions a correct form of feeding gases in the fuel cell is determined. Optimal operating conditions are found for a better utilization of fuel. Simulation results reveal that local current distribution on catalyst layer can be improved by feeding gases in similar mode and changing the channel height. However, polarization curves present an opposite response to this result. The polarization curve obtained in simulation is well correlated with experimental data.     

Properties of purified direct steam grown silicon thermal oxides

Thermal silicon oxides are known to very effectively passivate silicon surfaces. Choosing a water vapor ambient instead of a dry oxygen atmosphere increases the oxidation rate by about one order of magnitude and considerably reduces process time and costs. State of the art pyrox systems produce steam by pyrolysis of hydrogen and oxygen gas. A new approach is the purification of vaporized deionized (DI) water. In this work we present a direct comparison of both steam generation systems, which are connected to the same quartz tube of an industrial high quality tube furnace. The higher steam saturation of the direct steam process enhances the growth rate by about 20% compared to a pyrolytic steam based process. On low-resistivity p-type substrates, excellent surface recombination velocities of around 25 cm/s are found for both systems after a forming gas anneal. Detailed characterization shows similar physical properties of the oxide layers grown by either steam from pyrolysis or purified steam. Moreover, thermal oxide rear surface passivated silicon solar cells show similar high efficiencies exceeding 18.0% irrespective of the applied steam generation technology.