Influence of the chemical structure of PUR prepolymers on thermal stability

The thermal stability of adhesives for load-bearing construction has been one of their key parameters since engineered wood products were introduced in timber construction. In the case of one-component moisture-curing polyurethane (1C PUR) adhesives, knowledge about relationships between their chemical structure and the resulting bonding properties is limited, especially under high-temperature conditions. In this study the structure-property relationships of 1C PUR prepolymers were analyzed in the temperature range from 20 to 200 °C by means of mechanical and rheological tests. NCO-terminated urethane prepolymers were prepared from systematically varied MDI and polyether mixtures. The structural parameters investigated were the urea and urethane group content, cross-link density, ethylene oxide content and the adjustment of functionality via NCO or polyether component. Bonded wood joints were tested for their tensile shear strength and polymer films were analyzed by means of DMA and DSC. The results revealed a significant influence of hard segment content and cross-link density on the thermal stability of the prepolymers. Not all parameters that affect the film properties significantly influence bonding.     

A multiscale decomposition method for the optimal planning and scheduling of multi-site continuous multiproduct plants

This paper addresses the solution of simultaneous scheduling and planning problems in a production–distribution network of continuous multiproduct plants that involves different temporal and spatial scales. Production planning results in medium and long-term decisions, whereas production scheduling determines the timing and sequence of operations in the short-term. The production–distribution network is made up of several production sites distributing to different markets. The planning and scheduling model has to include spatial scales that go from a single production unit within a site, to a geographically distributed network. We propose to use two decomposition methods to solve this type of problems. One method corresponds to the extension of the bi-level decomposition of Erdirik-Dogan and Grossmann (2008) to multi-site, multi-market networks. A second method is a novel hybrid decomposition method that combines bi-level and spatial Lagrangean decomposition methods. We present four case studies to study the performance of the full space planning and scheduling model, the bi-level decomposition, and the bi-level Lagrangean method in profit maximization problems. Numerical results indicate that in large-scale problems, decomposition methods outperform the full space solution and that as problem size increases the hybrid decomposition method becomes faster than the bi-level decomposition alone.     

The fate of iron during the alkali‐activation of synthetic (CaO‐)FeOx‐SiO2 slags: An Fe K‐edge XANES study

Slags from the nonferrous metals industry have great potential to be used as feedstocks for the production of alkali‐activated materials. Until now, however, only very limited information has been available about the structural characteristics of these materials. In the work presented herein, synthetic slags in the CaO–FeO_x–SiO₂ system, representing typical compositions of Fe‐rich slags, and inorganic polymers (IPs) produced from the synthetic slags by activation with alkali silicate solutions have been studied by means of X‐ray absorption near‐edge structure (XANES) spectroscopy at the Fe K‐edge. The iron in the slags was largely Fe²⁺, with an average coordination number of approximately 5 for the iron in the amorphous fraction. The increase in average oxidation number after alkali‐activation was conceptualized as the consequence of slag dissolution and IP precipitation, and employed to calculate the degrees of reaction of the slags. The degree of reaction of the slags increased with increasing amorphous fraction. The iron in the IPs had an average coordination number of approximately 5; thus, IPs produced from the Fe‐rich slags studied here are not Fe‐analogs of aluminosilicate geopolymers, but differ significantly in terms of structure from the latter.     

Long term stability of electrocaloric response in barium zirconate titanate

The stability of the electrocaloric effect under electric field cycling is an important consideration in the development of solid-state cooling devices. Here we report measurements carried out on Ba(Zr_0.2Ti_0.8)O₃ ceramics which reveal that the adiabatic temperature change, polarization-electric field hysteresis loops and dielectric permittivity/loss show stable behavior up to 10⁵ cycles. We further demonstrate that the loss in electrocaloric response observed after 10⁵ cycles is associated with the migration of oxygen vacancies. As a result, the electrical properties of the material are changed leading to an increase in leakage current and Joule heating. Reversing the polarity of the electric field after every 10⁵ cycles changes the migration direction of oxygen vacancies, thereby preventing charge accumulation at grain boundaries and electrodes. By doing so, the electrocaloric stability is improved and the adiabatic temperature remains constant even after 10⁶ cycles, much higher than achieved in commercially available barium titanate ceramics.     

Sulfite Action in Glycolytic Inhibition: In Vivo Real‐Time Observation by Hyperpolarized 13C NMR Spectroscopy

Detecting the molecular targets of xenobiotic substances in vivo poses a considerable analytical challenge. Here, we describe the use of an NMR‐based tracer methodology for the instantaneous in vivo observation of sulfur(IV) action on cellular metabolism. Specifically, we find that glycolytic flux is directed towards sulfite adducts of dihydroxyacetone phosphate and pyruvate as off‐pathway intermediates that obstruct glycolytic flux. In particular, the pyruvate–sulfite association hinders the formation of downstream metabolites. The apparent in vivo association constant of pyruvate and sulfite agrees with the apparent inhibition constant of CO₂ formation, thus supporting the importance of pyruvate interception in disturbing central metabolism and inhibiting NAD regeneration.     

Microwave dielectric properties of flexible butyl rubber–strontium cerium titanate composites

Butyl rubber–strontium cerium titanate (BS) composites have been prepared by hot pressing. The tensile tests show that the BS composites are flexible. The dielectric properties of the composites have been investigated at 1 MHz and 5 GHz as a function of ceramic contents. The composite with volume fraction 0.43 of ceramic filler has a dielectric constant (ε_r) of 11.9 and dielectric loss (tan δ) 1.8 × 10^?3 at 5 GHz. The measured values of ε_r are compared with the effective values calculated using different theoretical models. The thermal conductivity of the composites is found to increase with ceramic contents and reaches a value of 4.5 Wm^?1 K^?1 for maximum filler loading 0.43 volume fraction. The coefficient of thermal expansion of the composites decreases gradually with filler loading and reaches a minimum value of 30.2 ppm °C^?1 at a volume fraction 0.43. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

Cyclohexa‐3,5‐diene‐1,2‐trans‐diols – Synthesis and Application in Target‐Oriented Syntheses

An exhaustive overview of the field of cyclohexa‐3,5‐diene‐1,2‐trans‐diols is given. Early and recent methods for the formation of the compounds are reviewed and the various syntheses in which the title compounds have been applied are presented. Special emphasis is given to naturally occurring epoxides, which have been the dominant target molecules since the 1970s. Finally, recent advances in biotechnology are highlighted; with the increased availability of the enantiomerically pure cyclohexa‐3,5‐diene‐1,2‐trans‐diols, new synthetic endeavours were initiated.     

S-Adenosyl-l-Methionine Salvage Impacts Psilocybin Formation in “Magic” Mushrooms

Psychotropic Psilocybe mushrooms biosynthesize their principal natural product psilocybin in five steps, among them a phosphotransfer and two methyltransfer reactions, which consume one equivalent of 5′-adenosine triphosphate (ATP) and two equivalents of S-adenosyl-l -methionine (SAM). This short but co-substrate-intensive pathway requires nucleoside cofactor salvage to maintain high psilocybin production rates. We characterized the adenosine kinase (AdoK) and S-adenosyl-l -homocysteine (SAH) hydrolase (SahH) of Psilocybe cubensis. Both enzymes are directly or indirectly involved in regenerating SAM. qRT-PCR expression analysis revealed an induced expression of the genes in the fungal primordia and carpophores. A one-pot in vitro reaction with the N-methyltransferase PsiM of the psilocybin pathway demonstrates a concerted action with SahH to facilitate biosynthesis by removal of accumulating SAH.     

Crossing the Border: From Keto- to Imine Reduction in Short-Chain Dehydrogenases/Reductases

The family of NAD(P)H-dependent short-chain dehydrogenases/reductases (SDRs) comprises numerous biocatalysts capable of C=O or C=C reduction. The highly homologous noroxomaritidine reductase (NR) from Narcissus sp. aff. pseudonarcissus and Zt_SDR from Zephyranthes treatiae, however, are SDRs with an extended imine substrate scope. Comparison with a similar SDR from Asparagus officinalis (Ao_SDR) exhibiting keto-reducing activity, yet negligible imine-reducing capability, and mining the Short-Chain Dehydrogenase/Reductase Engineering Database indicated that NR and Zt_SDR possess a unique active-site composition among SDRs. Adapting the active site of Ao_SDR accordingly improved its imine-reducing capability. By applying the same strategy, an unrelated SDR from Methylobacterium sp. 77 (M77_SDR) with distinct keto-reducing activity was engineered into a promiscuous enzyme with imine-reducing activity, thereby confirming that the ability to reduce imines can be rationally introduced into members of the “classical” SDR enzyme family. Thus, members of the SDR family could be a promising starting point for protein approaches to generate new imine-reducing enzymes.     

Fabrication of porous silicon by metal-assisted etching using highly ordered gold nanoparticle arrays

ABSTRACT: A simple method for the fabrication of porous silicon (Si) by metal-assisted etching was developed using gold nanoparticles as catalytic sites. Etching masks were prepared by spin-coating of colloidal gold nanoparticles onto Si. Appropriate functionalization of the gold nanoparticle surface prior to the deposition step enabled the formation of quasi-hexagonally ordered arrays by self-assembly which were translated into an array of pores by subsequent etching in a HF solution containing H2O2. The quality of the pattern transfer depended on the chosen preparation conditions for the gold nanoparticle etching mask. The influence of the Si surface properties were investigated by using either hydrophilic or hydrophobic Si substrates resulting from piranha solution or HF treatment, respectively. The polymer coated gold nanoparticles had to be thermally treated in order to provide direct contact at the metal/Si interface which is required for the following metal-assisted etching. Plasma-treatment as well as flame annealing were successfully applied. Best results were obtained for Si substrates which were treated with HF prior to spin-coating and flame annealed in order to remove the polymer matrix. The presented method opens up new resources for the fabrication of porous silicon by metal-assisted etching. Here, the vast variety of metal nanoparticles accessible by well-established wet-chemical synthesis can be employed for the fabrication of the etching masks.