Code-to-code comparison study on rotor aeromechanics in descending flight

This paper conducts the aeromechanics study using the two different rotorcraft computational structural dynamics (CSD) codes, CAMRAD II and DYMORE II, for the rotor in low-speed descending flight. The three test cases of the HART (Higher-harmonic control aeroacoustic rotor test) I -baseline, minimum noise, and minimum vibration- are considered in this study of the blade-vortex interaction (BVI) airloads, rotor trim, blade elastic deformations, and blade structural loads. The two prediction results are compared to each other for a code-to-code comparison study as well as to the measured data. Although CAMRAD II and DYMORE II use different theories and models, most of the prediction results are similar to each other and compared fairly well with the wind tunnel test data. For all the three test cases, the two rotorcraft CSD analyses show good prediction on the fluctuations of the section normal force (M²C_n) due to BVI, but both over-predict the trimmed collective pitch angle. The blade elastic deformations, such as flap deflection and elastic torsion deformation at the tip, are reasonably predicted by both rotorcraft CSD analyses. But, the CAMRAD II result using the multiple-trailer wake model with consolidation is slightly better than the DYMORE II prediction with the single wake panel model particularly for the elastic torsion deformation in the baseline case. In addition, CAMRAD II and DYMORE II both correlate reasonably the blade structural loads, such as flap bending, lead-lag bending, and torsion moments, with the measured data; however, the CAMRAD II results are moderately better than the DYMORE II predictions.     

Ce3+/Tb3+-coactived NaMgBO3 phosphors toward versatile applications in white LED,FED, and optical anti-counterfeiting

Ce³⁺/Tb³⁺ co-doped NaMgBO₃ phosphors were successfully synthesized by solid-state method. Under 381 nm excitation, the cyan emission owing to the 5d → 4f of Ce³⁺ ions and green emissions arising from the ⁵D₄ → ⁷F_J (J = 6, 5, 4, and 3) transitions of Tb³⁺ ions were seen in all the phosphors. Through theoretical analysis, one knows that the energy transfer from Ce³⁺ to Tb³⁺ ions with high efficiency of 83.74% was contributed by dipole–dipole transition. Furthermore, the internal quantum efficiency of NaMgBO₃:0.01Ce³⁺,0.03Tb³⁺ phosphor was 54.28%. Compared with that of at 303 K, the emission intensity of the developed products at 423 K still kept 73%, revealing the splendid thermal stability of the studied phosphors. Through utilizing the resultant phosphors as cyan-green components, the fabricated white-LED device exhibited an excellent correlated color temperature of 2785 K, high color-rendering index of 85.73, suitable luminance efficiency of 25.00 lm/W, and appropriate color coordinate of (0.4279, 0.3617). Aside from the superior photoluminescence, the synthesized phosphors also exhibited excellent cathode-luminescence properties which were sensitive to the current and accelerating voltage. Furthermore, the NaMgBO₃:0.01Ce³⁺,0.03Tb³⁺ phosphors with multi-mode emissions were promising candidates for optical anti-counterfeiting. All the results indicated that the Ce³⁺/Tb³⁺ co-doped NaMgBO₃ phosphors were potential multi-platforms toward white-LED, field emission displays, and optical anti-counterfeiting applications.     

Nitrogen removal using recycled polystyrene bottles as biofilm media

The performance of an attached growth wastewater treatment process was investigated in an effort to improve nitrogen removal efficiency. Recycled Yakult (lactic acid fermentation drink) bottles made of polystyrene were used as a biofilm media. The use of Yakult bottles as a biofilm media has been attempted by numerous researchers in Japan for the removal of solids and organics. However, these studies focused only on the removal of solids and organics. This study extended their application to the removal of nitrogen for domestic sewage treatment. Yakult media was placed in a reactor with 70% apparent reactor volume in a conventional A/O process. The bottom of the Yakult media was removed, and randomly filled Yakult media were effectively able to reduce the flow in tanks, resulting in an increase in the contact time between pollutants and microorganisms. With higher HRT, the nitrogen removal efficiency was increased by up to 83% with 12 hr of HRT. Nitrification appeared to be the limiting factor of nitrogen removal at an HRT that is less than 12 hr, indicating that the Yakult process requires more retention time to achieve nitrification compared to other biofilm processes. The removal efficiencies of organics and solids were high regardless of the change of operational parameters. This article is based on a presentation in “The 7th Korea-China Workshop On Advanced Materials” organized by the Korea-China Advanced Materials Cooperation Center and the China-Korea Advanced Materials Cooperation Center, held at Ramada Plaza Jeju Hotel, Jeju Island, Korea on August 24–27, 2003.     

Effect of low-cycle fatigue on the hot ductility of plain carbon steel

In a continuous casting steelmaking operation, the surface of a slab is under a condition that can be characterized as high-temperature, low-cycle fatigue in which the tensile and compressive stress is repeatedly developed. For this reason, for the evaluation of the hot ductility of a slab, considering the fatigue deformation is more feasible before a tensile or compressive test. In this study, the effects of low-cycle fatigue on the hot ductility of steels with a carbon content of 0.06–0.8 wt.% are investigated at various temperatures. For a carbon content of 0.06%, there were no significant differences between the RA values from a simple tensile test and those from a tensile test after fatigue deformation. The tendency of ductility deterioration with fatigue deformation is evident in 0.1 %C steel, and is due to the deformation-induced ferrite film that forms around the prior austenite grain. Conversely, high carbon steel containing 0.8 %C did not show a recovery of hot ductility in a low temperature region, and the specimen on which the tensile was measured after fatigue showed a higher hot ductility in the low temperature region, which is thought to result from the pearlite refinement effects. As the results obtained in this work showed noticeable differences in the hot ductility of carbon steel through the test conditions, it is suggested that for more accurate data, fatigue deformation be adopted in which the temperature range in an unbending operation is determined in the steelmaking factory.     

Thermodynamic reassessment of the Cd−Zn system

The Cd−Zn system has been thermodynamically reassessed with the CALPHAD method by combining more recent experimental data, in particular the activities of zinc in the liquid phase. A good agreement is obtained between the calculated and experimental thermodynamic parameters as well asphase boundaries.     

How purchase intention consummates purchase behaviour: the stochastic nature of product valuation in electronic commerce

This study challenges the conventional assumption that online customers with high purchase intention routinely move to the purchase stage. To this end, the process of how online customers form purchase intention and behaviour is examined. On the basis of product value distribution (PVD), we propose that the hypothetically expected product value (i.e. PVD average) determines purchase intention, whereas the actual probability of attaining the expected product value (i.e. PVD variance) moderates purchase behaviour. This proposal indicates that the expected product value has significance only when repeated purchase is assumed given that most consumers do not repeatedly purchase the same product in reality. Thus, the actual probability of attaining the expected product value more critically affects customer behaviour than does its expected value. The effectiveness of the research model is verified by conducting a survey on 300 online mall shoppers in Korea. The results confirm model effectiveness.     

Retracted: Antecedents and Consequences of Gender Swapping in Online Games

This study examines the reasons underlying gender swapping and its impacts on online gaming behavior. While previous studies considered gender swapping to be an abnormal or rare exception in one's self‐presentation, this study hypothesized that people swap genders as a rational choice based on practical benefits. An online survey was conducted with 318 male players of MMORPGs in Korea. Players swapped gender in games to gain benefits from other players under the condition of anonymity rather than to represent their own gender identity. Men playing female avatars displayed more socially amiable behaviors conventionally characterized as more feminine. Moreover, players were more willing to purchase virtual goods to decorate their gender swapped avatars, mediated by their emotional attachment to their avatar.     

Korean-English bilingual videotext recognition for news headline generation based on a split-merge strategy

This paper deals with Korean-English bilingual videotext recognition for news headline generation. Because videotext contains semantic content information, it can be effectively used for understanding videos. Despite its usefulness, it is a challengeable task to apply text recognition technologies to practical video applications because of the computational complexity and recognition accuracy. In this paper, we propose a novel Korean-English bilingual videotext recognition method to overcome the computational complexity as well as achieve comparable recognition accuracy. To recognize both Korean and English characters effectively, the proposed method employs an elaborate split-merge strategy in which the split segments are merged into characters using the recognition scores. Moreover, it avoids unnecessary computation using geometric features such as squareness and internal gap, and thus its computational overhead is remarkably reduced. Therefore, the proposed method is successfully employed in generating news headlines. The effectiveness and efficiency of the proposed method are verified by extensive experiments on a challenging database containing 51,290 text images (176,884 characters).     

Distinct element method analysis of a retaining wall using a steel frame and fill materials

A technique is developed to clearly establish the shear resistance of a cellular structure, retaining wall composed of a steel frame and fill materials with both continuous and discontinuous characteristics. To overcome the limitation of the existing analysis approach based on continuum mechanics, in which the shear behavior and interaction between the frames and fill material of this type of structure are difficult to describe, this paper introduces displacement incremental analysis into the distinct element method. The results obtained by using the proposed approach are compared with experimental results to verify its accuracy. The results show an internal friction angle of fill materials and overburdening load are major factor determining the shear resistance of a retaining wall with a cellular structure type. From the results of the parametric study on the shear behavior of this type of structure, this paper also proposes a shear resistance moment-shear displacement formula for designing a retaining wall with a cellular structure type.