High Intensity Operation at Naoshima Smelter

This paper describes the successful test operation of a 50 t/h concentrate feed rate (or on the anode copper basis 9000 tlm) with the Mitsubishi Process. Particular emphasis is given to the analyses of the furnace capacity by the measurement of flow pattern and oxygen potential. Smelting rate on the unit hearth area of the smelting furnace is now one-ton of concentrate/m²·h. The results of the analyses show the further potential of the furnace capacity of the process.     

Immobilization of alkaline phosphatase on magnetic particles by site-specific and covalent cross-linking catalyzed by microbial transglutaminase

Bacterial alkaline phosphatase (BAP) was site-specifically and covalently immobilized on magnetic particles (MPs) using the enzymatic reaction of microbial transglutaminase (MTG). Immobilization efficiency was affected by the chemical surface treatment of MPs and immobilized BAP exhibited more than 90% of the initial activity after 10 rounds of recycling.     

Generation of pedestal-free 22-fs ultrashort pulse using highly nonlinear fiber and reverse-dispersion fiber

We present an all-fiber system for generating pedestal-free 22-fs ultrashort pulses with a single-peak spectrum. High-power Raman soliton pulses and a normally dispersive highly nonlinear fiber are used to generate a smooth, broadened single-peak spectrum. Then, the higher order dispersion is compensated for using a hybrid fiber composed of a reverse-dispersion fiber and a standard single-mode fiber, which allows pedestal-free ultrashort pulses to be successfully generated. To our knowledge, this is the first demonstration of pedestal-free 20-fs-class ultrashort pulse generation without spectral distortion using an all-fiber configuration.     

High-mobility strained-Si PMOSFET's

Operation and fabrication of a new high channel mobility strained-Si PMOSFET are presented. The growth of high-quality strained Si layer on completely relaxed, step-graded, SiGe buffer layer is demonstrated by gas source MBE. The strained-Si layer is characterized by double crystal X-ray diffraction, photoluminescence, and transmission electron microscopy. The operation of a PMOSFET is shown by device simulation and experiment. The high-mobility strained-Si PMOSFET is fabricated on strained-Si, which is grown epitaxially on a completely relaxed step-graded Si_0.82Ge_0.18 buffer layer on Si(100) substrate. At high vertical fields (high |V_g|), the channel mobility of the strained-Si device is found to be 40% and 200% higher at 300 K and 77 K, respectively, compared to those of the bulk Si device. In the case of the strained-Si device, degradation of channel mobility due to Si/SiO₂ interface scattering is found to be more pronounced compared to that of the bulk Si device. Carrier confinement at the type-II strained-Si/SiGe-buffer interface is clearly demonstrated from device transconductance and C-V measurements at 300 K and 77 K     

Preliminary investigation of a vapor-open envelope tailored for subtropical climate

Concerning global warming and resource depletion, the impact of buildings in subtropical regions is becoming even greater due to a high growth rate of urbanized areas. From the viewpoint of building physics, the main problem concerning subtropical climate is the high level of humidity in combination with high temperature. In this study, a flexible building envelope consisting of wood and clay components was developed so that the materials and the assemblies can be easily tailored to comply with local climatic conditions. The movement and accumulation of moisture in the wall was of prime concern. This has been investigated by means of testing full scale walls in a climate chamber and the corresponding one dimensional transient heat and transfer simulation. In order to achieve a consistency between calculation and measurement, the individual materials were tested for their hygric and thermal properties. Based on these findings attempts were made to calculate the behavior of an optimized wall assembly under real climatic conditions of central Japan. As a result, it was shown that the hygrothermal behavior of the envelope is predictable by means of the models and the simulation program used, and that no risk of interstitial condensation and mold growth was predicted under the real climatic conditions of Kyoto.     

X-ray diffraction and H-storage in ultra-small palladium particles

In situ X-ray diffraction (XRD) and gravimetric hydrogen uptake measurements of d ∼ 2–3 nm spherical PdH_x particles have been studied in the temperature and pressure range of 323 < T < 428 K and 0 < P < 10 bar. The Pd particles were protected from sintering with a hydrogen-permeable carbon coating. While only containing ∼300–1000 atoms, the Pd particles were found to exhibit the same fcc structure and lattice constant as the bulk. Our isothermal studies show that, with increasing x, these highly crystalline PdH_x nanoparticles also exhibit a complete transformation from the dilute α solid solution phase to the more concentrated β hydride phase. However, we observed that the character of the α–β phase transition in these nanoparticles is very different from that in the bulk. Indeed, the hydrogen uptake isotherm exhibits a noticeable positive slope in the α + β co-existence region. Furthermore, we also observed a noticeable narrowing of the α + β co-existence region (δx) in the nanoparticles. Also, a significant suppression of the critical temperature T_c for the phase boundary was observed: T_c(nano) ≈ 430 K while T_c(bulk) ≈ 570 K. These results signal a significant change in the thermodynamic behavior of very small hydride nanoparticles that may be common to many other nano-scale metal hydride systems as well.     

Core business concentration vs. corporate diversification in the US electric utility industry: Synergy and deregulation effects

Many economists such as Wilson (2002) [Wilson, R., 2002. Architecture of power market, Econometrica, 70, 1299–1340] have considered that there are similarities between electricity and gas services in the US electric utility industry. Hence, they expect a synergy effect between them. However, the two businesses do not have technology similarities at the level that the gas service produces a synergy effect with electricity. To examine whether there is a synergy effect of corporate diversification in the industry, we compare electricity-specialized firms with diversified utility firms in terms of their financial performance and corporate value. The comparison indicates that core business concentration is more effective for electric utility firms than corporate diversification under the current US deregulation policy.     

Tachykinins and tachykinin receptors in bone

Adrenomedullin (AM) was originally characterized in extracts of an adrenal medullary tumor. Since this original finding the peptide and its mRNA have also been found in the adrenal cortex, specifically, in the cells of the aldosterone-secreting zona glomerulosa. It is clear that the synthesis of AM is actively regulated in both cortex and medulla. Much research effort has been focused on identifying a role for AM in the adrenal gland. To date, no consistent effect on medullary catecholamine biosynthesis has been demonstrated. In the cortex the actions of AM are controversial and appear to depend on both the tissue preparation used and on the specific receptor population expressed in the individual gland. The results of further studies on the long-term actions of AM on adrenal growth and differentiation are awaited with interest.     

A density-independent method for high moisture content measurement using a microstrip transmission line.

This paper describes a method to measure high moisture content in materials from 190% to 350% on a dry weight basis. The method uses a microstrip transmission line, on which the material under test is overlaid. A parameter calculated from the attenuation and phase shift of the microwave signal is proposed to measure the moisture content. The experiments were performed on samples of sawdust, and the results show that the method is able to determine high moisture content independent of density. The standard error of calibration for the moisture content determination was 12.4% in the moisture content range from 190% to 350%.     

Heat-resisting TCO films for PV cells

We developed new heat-resisting transparent conductive oxide (TCO) films with resistivity of 1.4×10⁻⁴ Ω cm, an optical transmittance of above 80% (at 550 nm) and heat-resisting temperature at above 600 °C. The TCO films consists of fluorine-doped tin oxide films coated on indium–tin oxide films. They were prepared by a spray pyrolysis deposition method on glass substrates. The 100×100 mm² dye-sensitized solar cells (DSCs) were prepared with the TCO films. An energy conversion efficiency of the DSC was improved drastically in comparison to the case with conventional TCO films.