Corrosion evaluation of Au-Cu-Pd ternary alloys

The corrosion resistivity of single-phase Au-Cu-11 at% Pd alloys was evaluated by using a parameterQ which represented the total amount of anodic reaction in a potentiostatic polarization test. The result was compared with those for binary Au-Cu, ternary Au-Cu-11 at % Ag and some commercial alloys. The validity of usingQ as a corrosion parameter was confirmed by the good agreement between the analysed and calculated values of copper ion dissolved into the test solution. By replacing a part of the copper in Au-Cu alloys with palladium the corrosion resistivity can be greatly improved, but silver has no such significant effect. The value ofQ decreased by both treatments of homogenization and grain refinement of the alloy. One of the advantages of the alloy having a single-phase structure is that inhomogeneity in the distribution of the constituents is small even in the as-cast state, which results in a small galvanic effect.     

High Field ESR System and Its Application to the Study of Quantum Spin Systems

Developments of the high field ESR system in Kobe University is presented. Using Gunn oscillators and backward traveling oscillators (BWO), we can cover the frequency region from 30 to 1183.6 GHz with the use of InSb detector. Pulsed magnetic field up to 30 T is available and we are now trying to extend the field up to 40 T. Temperature range is from 1.8 to 300 K. Using this system, we studied S=1/2 ladder like system Cu₂(C₅H₁₂N₂)₂Cl₄, and found a new magnetic transition at 10.1 T at 1.8 K. The temperature dependence of ESR in Cu₂(C₅H₁₂N₂)₂CI₄ shows g-shift below 8 K which corresponds to the maximum of the magnetic susceptibility. The g-shift below 8 K suggests the increase of the quantum fluctuation in the system, and the role of the quantum fluctuation in Cu₂(C₅H₁₂N₂)₂CI₄ is discussed.     

Kinetic study on free radical polymerization of alkyl acylamidoacrylates by pulsed laser polymerization using nitrogen laser

Radical polymerization of captodatively substituted alkyl acylamidoacrylates was studied by pulsed laser polymerization using a N₂ laser. Propagation rate coefficient of the acrylates was varied with solvents used in spite of a radical mechanism, but little varied with methyl, n-propyl, and isopropyl substituents on the acrylates. Arrhenius parameters for the propagation indicated that a solvent affected mostly on a frequency factor rather than a activation energy. In addition, it was suggested that these captodatively substituted propagating radicals were thermodynamically persistent but kinetically active in propagation, which resulted in rather smooth propagation in spite of bulky 1,1-disubstituted olefins. The mechanism of the polymerizations was discussed in detail on the basis of the kinetic studies and ESR spectroscopy.     

Formulation of a standard deviate observer by a nonlinear optimization technique

A standard deviate observer (SDO) has been formulated that can predict the average color mismatches of metameric color pairs by 20 Stiles' observers. A nonlinear optimization technique, rather than a statistical analysis, has been employed to derive it. The colorimetric characteristics of the present SDO are compared with those of SDOs previously proposed.     

Transport of direct dye into cellulose membrane

The dyeing process for a cellulose membrane–direct dye system is analyzed based on a parallel transport mechanism of surface and pore diffusion with Freundlich isotherm. Numerical solutions were obtained in order to clarify how the surface and pore diffusion resistances affect the uptake curve. The numerical solutions were also compared with an analytical solution for surface diffusion control to establish the range where the analytical solution can be considered as an acceptable approximation. The uptake curves in the cellulose membrane-chromophore (C.I. Direct Yellow 12) system in the presence of inorganic electrolyte were measured. The rate of adsorption and the maximum amount of adsorption increased with an increase in the concentration of those electrolytes. The rate of adsorption was approximately controlled by the surface diffusion rather than by pore diffusion. The surface diffusivities of the dye were little affected by either the concentration and or nature of the electrolyte.     

CMOS retinal prosthesis with on-chip electrode impedance measurement

A retinal prosthesis device with built-in self-test capability is proposed and demonstrated. The measurement of electrode impedance as a self-test is achieved without increasing the chip area by employing analogue multiplexers to allow the electrodes to be used for both stimulation of retinal cells and measurement of impedance. Measurement is performed using a four-terminal method to ensure good accuracy. A prototype stimulus chip with 16/spl times/16 channels is fabricated using standard 0.6 /spl mu/m CMOS technology, and is demonstrated to provide self-test functionality with error of as little as 0.05% in the frequency range of 100 Hz to 100 kHz.     

Functional characterization and evolutionary implication of the internal 157-amino-acid sequence of an exoinulinase from Penicillium sp. strain TN-88

An extracellular exoinulinase from the filamentous fungus Penicillium sp. strain TN-88 has a 14-fold higher specific activity of 743 U/mg toward inulin than its equivalent from the Aspergillus niger strain 12 and possesses an internal 157-amino-acid sequence whose corresponding region is absent in the A. niger enzyme. On the basis of sequence alignment, the internal region D' encoding the 157-amino-acid sequence in the Penicillium exoinulinase gene inuD cDNA was inserted into the site between the nucleotides 897 and 898 of the A. niger exoinulinase gene inuE cDNA. The resultant inuE::D' fusion was expressed in the methylotrophic yeast Pichia pastoris. The K(m) value of the secreted hybrid enzyme InuE::D' for inulin hydrolysis was about 1/15 that of the A. niger InuE, whereas its k(cat) value did not differ greatly from that of the InuE. These observations indicate that the Penicillium exoinulinase has evolved by the horizontal transfer and integration of a relevant DNA segment and that the internal sequence D' functions as an additional noncatalytic inulin-affinity region.