Low-jitter design method based on Wn-domain jitter analysis for 10 Gbit/s clock and data recovery ICs

A low-jitter design method based on vn-domain jitter analysis for the clock and data recovery (CDR) ICs using the linear phase-locked loop (PLL) is proposed. Using this method, the loop parameters of the PLL can be optimised, which makes it possible to design the CDR IC for various targets.     

Competitive adsorption of α-lactalbumin in the molten globule state

The molten globule state of α-lactalbumin is a partially denatured form with native-like secondary structure and disordered tertiary structure. Using circular dichroism measurements, it was demonstrated that the molten globule state was produced by decreasing the pH to 2.0 at 25°C or by removing bound Ca²⁺ by treatment with ethylenediamine—tetraacetic acid (EDTA) at pH 7.5 and 40°C. Tension measurements showed that α-lactalbumin in the molten globule state is more easily unfolded at liquid interfaces than is the native protein. Results of competitive adsorption experiments involving α-lactalbumin and β-lactoglobulin at the oil droplet surface in emulsions are consistent with preferential adsorption of α-lactalbumin during emulsification when it is in the molten globule state. In contrast to the difficulty of exchange between α-lactalbumin and β-lactoglobulin at the oil-water interface in emulsions at 25°C, it has been found that the two whey proteins are able partially to displace one another from the oil—water interface at 40°C. While native α-lactalbumin was found to be readily displaced from the oil—water interface by β-lactoglobulin at 40°C, it was found that α-lactalbumin in the molten globule state in the presence of EDTA at 40°C had itself the capacity for displacing β-lactoglobulin from the interface.     

Low Capture Switching Activity Test Generation for Reducing IR-Drop in At-Speed Scan Testing

At-speed scan testing, based on ATPG and ATE, is indispensable to guarantee timing-related test quality in the DSM era. However, at-speed scan testing may incur yield loss due to excessive IR-drop caused by high test (shift & capture) switching activity. This paper discusses the mechanism of circuit malfunction due to IR-drop, and summarizes general approaches to reducing switching activity, by which highlights the problem of current solutions, i.e. only reducing switching activity for one capture while the widely used at-speed scan testing based on the launch-off-capture scheme uses two captures. This paper then proposes a novel X-filling method, called double-capture (DC) X-filling, for generating test vectors with low and balanced capture switching activity for two captures. Applicable to dynamic & static compaction in any ATPG system, DC X-filling can reduce IR-drop, and thus yield loss, without any circuit/clock modification, timing/circuit overhead, fault coverage loss, and additional design effort.

High performance 35 nm gate length CMOS with NO oxynitride gate dielectric and Ni salicide

The 35 nm gate length CMOS devices with oxynitride gate dielectric and Ni salicide have been fabricated to study the feasibility of higher performance operation. Nitrogen concentration in gate oxynitride was optimized to reduce gate current I/sub g/ and to prevent boron penetration in the pFET. The thermal budget in the middle of the line (MOL) process was reduced enough to realize shallower junction depth in the S/D extension regions and to suppress gate poly-Si depletion. Finally, the current drives of 676 /spl mu/A//spl mu/m in nFET and 272 /spl mu/A//spl mu/m in pFET at V/sub dd/=0.85 V (at I/sub off/=100 nA//spl mu/m) were achieved and they are the best values for 35 nm gate length CMOS reported to date.     

Dirac Cone Spin Polarization of Graphene by Magnetic Insulator Proximity Effect Probed with Outermost Surface Spin Spectroscopy

The effects of the proximity contact with magnetic insulator on the spin‐dependent electronic structure of graphene are explored for the heterostructure of single‐layer graphene (SLG) and yttrium iron garnet Y₃Fe₅O₁₂ (YIG) by means of outermost surface spin spectroscopy using a spin‐polarized metastable He atom beam. In the SLG/YIG heterostructure, the Dirac cone electrons of graphene are found to be negatively spin polarized in parallel to the minority spins of YIG with a large polarization degree, without giving rise to significant changes in the π band structure. Theoretical calculations reveal the electrostatic interfacial interactions providing a strong physical adhesion and the indirect exchange interaction causing the spin polarization of SLG at the interface with YIG. The Hall device of the SLG/YIG heterostructure exhibits a nonlinear Hall resistance attributable to the anomalous Hall effect, implying the extrinsic spin–orbit interactions as another manifestation of the proximity effect.     

An integrated photodetector-amplifier using a-Si p-i-n photodiodesand poly-Si thin-film transistors

The authors propose a photodetector-amplifier circuit consisting of a bridge photodetector circuit and a CMOS differential amplifier, both monolithically integrated on a transparent substrate. A test circuit was fabricated using a-Si p-i-n photodiodes and poly-Si thin-film transistors on a quartz substrate. A clear effect of the differential amplifier was demonstrated in the test circuit. It is shown that the circuit performance can be controlled by changing the bias current of the differential amplifier. With a relatively low bias current on the order of 10^-11 A, the circuit works digitally with output voltages either close to 0 V or V_DD. The power consumption of the circuit is approximately 60 μW, which is low enough for use in two-dimensional arrays     

Microstructure Development and Dielectric Properties of Potassium Strontium Niobate Ceramics

Sintering of a KSr₂Nb₅O₁₅ powder compact at 1350°C resulted in a duplex structure. Prefiring of the compact between 1200° and 1300°C inhibited the abnormal grain growth responsible for the duplex structure. The Curie temperature and dielectric constant were dependent on the microstructure.     

Fabrication of 80 mm diameter-sized solid oxide fuel cells using a water-based NiO–YSZ slurry

Solid oxide fuel cells (SOFCs) are very attractive for their high energy conversion efficiency and low emissions. Generally, a supported layer of SOFCs is fabricated by tape casting, using an organic solvent. Recently, a slurry based on water instead of an organic solvent has been sought in order to avoid environmental pollution. In this study, the anode of SOFCs was fabricated by aqueous tape casting, and the electrolyte and the cathode were deposited by screen printing. The I–V characteristics of the cell thus obtained were evaluated. As a result, an 80 mm diameter-sized cell with a power density of 0.33 W/cm² at 800 °C was successfully fabricated by controlling sintering conditions.     

Preparation of poly(N-isopropylacrylamide)–SiO2 hybrid gels and their thermosensitive properties

The swelling and adsorption behavior of poly(N-isopropylacrylamide)–SiO₂ hybrid gels, derived from copolymerization of N-isopropylacrylamide and 3-methacryloxypropyltrimethoxysilane (MPTMOS) and following hydrolysis and condensation, were investigated. The hybrid gels exhibited temperature dependence of both the swelling ratio and adsorption of solutes, and their temperature dependence of both the swelling ratio and adsorption of solutes, and their temperature dependence was related to the MPTMOS content in the hybrid gels. In addition, the modification of thermosensitive properties of the hybrid gels could be achieved by treatment with other silane compounds. © 1996 John Wiley & Sons, Inc.     

Ketones from carboxylic acids over supported magnesium oxide and related catalysts

Silica-supported alkaline earth oxides revealed excellent activity to convert acetic acid selectively into acetone in a vapor-phase fixed-bed flow system. Acetone was obtained through the cyclic formation of alkaline earth acetate followed by decomposition. Magnesium oxide should be supported on the silica surface without formation of magnesium silicate, which was inactive for the present reaction. Attempted syntheses of benzophenone and acetophenone are also described.