Intense spontaneous violet emission due to coherent two-photon excitation in potassium

This paper describes the measured result of intense violet emission at 4048 Å that is due to the strong coherent two-photon excitation in potassium vapor. Anomalous delay and narrowing of the emitted pulse was observed in contrast to the incident pulse. The intensity dependence on the atomic density also is reported.     

Isolation of dimethyl sulfone-degrading microorganisms and application to odorless degradation of dimethyl sulfoxide

With the objective of developing an odorless biodegradation process for dimethyl sulfoxide (DMSO), Hyphomicrobium sp. WU-OM3 was isolated. During the cultivation of strain WU-OM3 cells with 20 mM dimethyl sulfone (DMSO2) as the sole carbon source, DMSO2 was completely consumed within 48 h and sulfate ion accumulated in the culture broth. Methanesulfonate was also detected as an intermediate of DMSO2 degradation. By combining the DMSO-oxidizing microorganism and strain WU-OM3 cells, 0.64 mM (50 mg/l) DMSO was degraded to sulfate ion with 80% molar conversion ratio.     

Study on anisotropy of growth rate of ice crystal in supercooled water

The purpose of this research was to investigate the ice growth of a single crystal in three dimensions. Three-dimensional pattern of ice crystal growth in supercooled water was observed using Mach–Zehnder spectro-interferometer. Temperature was varied from −0.3 to −1.6 °C. It was found that the ice crystal began to grow as a single crystal at the tip of the capillary tube and propagated freely in supercooled water. Time variation of the shape of dendrite on a–c plane was obtained. It was found that half parabola fits the shape very closely, and the coefficient of squared term, a, of a quadratic function was calculated. The coefficient, a varied in time but at quasi steady state it was found to be depending mostly upon the degree of supercooling. Furthermore, the growth velocity in c-axis at the flat surface was calculated from the thickness measured. It was found that the velocity in c-axis is independent of the degree of supercooling but depends upon time, in other words, the thickness in c-axis.     

Low temperature deposition of hexagonal BN films by chemical vapour deposition

Transparent hexagonal BN films were deposited onto copper substrates from the reactant gas BCl₃-NH₃-H₂ at temperatures in the range 250–700°C. The lowest deposition temperature of the films was about 250°C. The films deposited at temperatures below 450°C were unstable in moist atmosphere and devitrified; a 20%–30% decrease in weight was observed when these films were heated above 600°C in an argon atmosphere. In contrast, the films deposited at temperatures above 600°C were very stable, decreased in weight by 1%–2% on heating and were stable in air at temperatures below 750°C.     

Computer-generated Conversation Using Newspaper Headline

In this paper, the authors propose a method that incorporates mechanisms for handling ambiguity in speech and the ability of humans to create associations, and for formulating conversations based on rule base knowledge and common knowledge. Go beyond the level that can be achieved, using only conventional natural language processing and vast repositories of sample patterns. In this paper, the authors propose a method for computer conversation sentences generated using newspaper headlines as an example of how the common knowledge and associative ability are applied.     

On the heat removal characteristics and the analytical model of a thermal energy storage capsule using gelled Glauber's salt as the PCM

An analytical and experimental investigation was performed on a heat removal process of the thermal energy storage (TES) capsule, using gelled Glauber's salt. Transient heat flux at the capsule wall was measured for various cooling conditions. In cases where the initial temperature was lower than the saturation temperature of the phase change material (PCM), numerical analyses were performed, approximating the process by a relaxation phenomenon where crystals grew around crystal nuclei. The results of the numerical solution agreed very well with the experimental results.     

Global Phase Diagram of the Kondo Lattice: From Heavy Fermion Metals to Kondo Insulators

We discuss the general theoretical arguments advanced earlier for the T=0 global phase diagram of antiferromagnetic Kondo lattice systems, distinguishing between the established and the conjectured. In addition to the well-known phase of a paramagnetic metal with a “large” Fermi surface (P_L), there is also an antiferromagnetic phase with a “small” Fermi surface (AF_S). We provide the details of the derivation of a quantum non-linear sigma-model (QNLσM) representation of the Kondo lattice Hamiltonian, which leads to an effective field theory containing both low-energy fermions in the vicinity of a Fermi surface and low-energy bosons near zero momentum. An asymptotically exact analysis of this effective field theory is made possible through the development of a renormalization group procedure for mixed fermion-boson systems. Considerations on how to connect the AF_S and P_L phases lead to a global phase diagram, which not only puts into perspective the theory of local quantum criticality for antiferromagnetic heavy fermion metals, but also provides the basis to understand the surprising recent experiments in chemically-doped as well as pressurized YbRh₂Si₂. We point out that the AF_S phase still occurs for the case of an equal number of spin-1/2 local moments and conduction electrons. This observation raises the prospect for a global phase diagram of heavy fermion systems in the Kondo-insulator regime. Finally, we discuss the connection between the Kondo breakdown physics discussed here for the Kondo lattice systems and the non-Fermi liquid behavior recently studied from a holographic perspective.     

Surface properties of carbon micro-coils oxidized by a low concentration of oxygen gas

Vapor-grown carbon micro-coils were oxidized under a low O₂ flow-rate for introducing oxygen-containing functional groups on the surface. The surface characteristics were then examined. The O1s/C1s intensity ratios of the XPS spectra measured on the surface increased on using the oxidation treatment. The maximum O1s/C1s ratio of 11.4 at.% was obtained under the following conditions: (a) the flow-rate of the mixed gas of O₂+Ar (O₂/Ar=1/10) was 82.5 sccm; (b) the oxidation temperature was 600°C; and (c) the treatment time was 30 min. The maximum O1s/C1s ratio is about 3.5 times that of the source carbon coils. The specific surface area significantly increased due to the oxidation treatment and attained a maximum value of 1050 m² g⁻¹, which is about 10 times that of the source carbon coils. As the specific surface area increased, the surface morphology of the carbon coils became more complicated on a nanometer scale.