Determination of residual avoparcin in chicken muscle by HPLC with ultraviolet and amperometric detection

An analytical method was developed for determination of residual avoparcin in chicken muscle by measuring alpha- and beta-avoparcin, major components of the pharmaceutical preparation avoparcin, using HPLC with UV and amperometric detectors. The analytical HPLC was run on a Cosmosil 5C18-AR column (4.6 mm x 25 cm) with a gradient formed from A: 2.5% acetic acid, 0.01 mol/L sodium heptane sulfonic acid-acetonitrile (88.5:11.5) (pH 4.0) and B: 2.5% acetic acid-acetonitrile (10:90), using UV and amperometric detection (AMD) with glassy-carbon electrode (+900 mV). Avoparcin was extracted from chicken muscle by homogenization with methanol-0.2 mol/L sulfuric acid (6:4) followed by centrifugation after pH adjustment to 4 with 1 mol/L sodium hydroxide. The supernatant was evaporated to dryness, and the residue was dissolved in water. The aqueous layer was adjusted to pH 4 by adding 1 mol/L sodium hydroxide. Then it was purified on a Sep-Pak tC18 plus ENV cartridge. The cartridge was washed with water, and retained substances were eluted with 50% methanol. The eluate was evaporated to dryness under reduced pressure. The residue was dissolved in water and determined by HPLC. Recoveries of avoparcin spiked in chicken muscle were 73.1-88.1% at levels of 2-10 micrograms/g. The detection limits were 0.5 microgram/g (UV) and 0.2 microgram/g (AMD).     

Strain selection and scale-up fermentation for FR901379 acylase production by Streptomyces sp. no. 6907

Micafungin (FK463) is a widely used treatment for life-threatening, deep-seated fungal infections. It is an echinocandin-like lipopeptide derived from the chemical modification of deacylated FR901379, a type of lipopeptide antibiotic produced by Coleophoma empetri F-11899. The palmitoyl moiety of FR901379 is deacylated by FR901379 acylase produced by Streptomyces sp. no. 6907. In this study, our goal was to generate an improved strain of Streptomyces sp. no. 6907 capable of hyperproducing the FR901379-acylase enzyme. To accomplish this goal, modified strains of Streptomyces sp. no. 6907 were generated using UV-irradiation mutagenesis, and strain selection was performed using an agar-plate screening method to efficiently select an acylase-hyperproducing strain. Three marker indices were shown to correlate with elevated acylase production: decreased candidacidal activity of FR901379, decreased proteolytic activity on skim milk, and phenotypic characteristics. Cloning and subsequent sequencing of the acylase gene from the hyperproducing mutant revealed no mutations in either the acylase structural gene or the 5'-flanking region required for gene expression. The growth medium was also modified to maximize acylase production. We successfully increased acylase activity approximately 65-fold, compared with the original growth conditions (wild strain cultured in the original unmodified medium). To minimize formation of excess foam during the fermentation process, we optimized the parameters of agitation speed, as calculated from the discharge flow rate. Using our improved strain and the optimized medium and growth conditions, we have developed an improved and highly reproducible method for stable large-scale production of FR901379-acylase.     

Effects of Some Light Alloying Elements on the Oxidation Behavior of Fe and Ni-Cr Based Alloys During Air Plasma Spraying

The oxidation behavior of iron binary powders with addition of Si (1, 4 wt.%) and B (1, 3 wt.%) and that of a Ni-Cr based alloy powder with Si (4.3 wt.%), B (3.0 wt.%), and C (0.8 wt.%) additions during atmosphere plasma spray (APS) have been investigated. Analysis of the chemical composition and phases of oxides in the captured in-flight particles and deposited coatings was carried out. The results show that the addition of Si and B to iron effectively reduced the oxygen contents in the coatings, especially during the in-flight period at higher particles temperature. Ni-Cr based alloy powder with Si, B, and C additions reduced the oxidation of the base alloys significantly. Preferential oxidation and subsequent vaporization of Si, B, and C from the surface of the sprayed particles are believed to play a major role in controlling oxidation in the APS process.     

Applicability of GC, GC/MS and liquid chromatography with tandem mass spectrometry to screening for 140 pesticides in agricultural products

The applicability of GC, GC/MS and liquid chromatography with tandem mass spectrometry (LC/MS/MS) to screening for 140 pesticides in agricultural products was examined. Validation of multi-residue screening methods for the determination of 88 pesticides in 12 crops (asparagus, cauliflower, burdock, carrot, broccoli, spinach, matsutake mushroom, orange, soybean, sesame, millet and tea) was done by GC and GC/MS. Of the 88 pesticides, 63 were obtained with recoveries in the range from 50 to 150% at the 0.1 microg/g level in the 12 crops. Applicability of the official methods in Japan to 74 pesticides, including 22 pesticides with low recovery (< 50%) by GC or GC/MS analysis, was also examined by LC/MS/MS. LC/MS/MS acquisition parameters were established for 67 pesticides in positive and negative electrospray ionization (ESI) modes. Of 67 pesticides validated in 7 crops using LC/MS/MS at the 0.1 microg/g level, 44 showed recoveries in the range from 50 to 150%. The occurrence of matrix interference in LC/MS/MS can lead to false-positive detection of MCPA in spinach, cabbage and orange and false-negative detection of four pesticides in orange, spinach, apple and unpolished rice. Good linearity was observed in the studied ranges by GC, GC/MS (r > 0.990) and LC/MS/MS (r > 0.995). Of the total of 140 pesticides validated by GC, GC/MS and LC/MS/MS, 107 were newly recognized as suitable subjects for screening.     

Molded micro- and mesoporous carbon/silica composite from rice husk and beet sugar

A molded carbon/silica composite with high micro- and mesoporosity, as well as a high bulk density, was fabricated by activating a disk-molded precursor made from carbonized rice husk (RH) and beet sugar (BS) at 875 °C in CO₂. The pore structure of the RH- and BS-based carbon/silica composite (RBC) was analysed in relation to the bulk density. An activation time of 2.0 h provided the largest BET specific surface area (1027 m²/g) and total pore volume (0.68 cm³/g) and a low bulk density (0.54 g/cm³). An RBC that was first activated for 1 h was immersed again in BS syrup and then activated in CO₂ for 1 h. This two-step activation process provided both a high bulk density (0.69 g/cm³) and a highly textured structure (BET specific surface area, 943 m²/g; total pore volume, 0.56 cm³/g). The immersion in BS syrup was useful for improving the texture without reducing the bulk density, in comparison to one-step activation for 1.0 h. The suspension of the RBCs was basic because of the residual inorganic compounds of potassium and calcium. However, the basicity of the suspension was alleviated by washing the RBCs with water.     

A comparative study of the emotional assessment of automotive exterior colors in Asia

This article compares color assessments of automotive exteriors at four locations in China, Thailand and Japan. This study employed painted panels of twelve colors, thirty sensory words and fifteen pairs of emotion variables. It also used reference figures of nine cars that included four styling categories, namely sedans, compacts, sport utility vehicles and sports cars. The results of like-dislike tests revealed that basic automotive exterior colors, such as black, white and red, were highly preferred across locations. However, geographical differences are apparent in the preference for some non-basic colors. To elucidate these geographical differences, a Chi-square test and principal component analysis were performed on the data on emotion variables. The results revealed both similarities and differences in color preferences among the four locations. Color preferences were similar in Hong Kong and Shanghai when simply evaluated by color samples. However, similar preferences for automotive exterior colors were observed in Hong Kong, Kyoto and Bangkok, but not in Shanghai. These results suggest that there is fluctuation in the emotion evoked by a color when the color is considered in the context of automotive exteriors. Therefore, this study indicates that automotive sales can be secured in the global marketplace by creating a single palette of exterior colors based on similar color preferences across countries. However, these results also indicate that preparing market-specific automotive-color line-ups can be an effective marketing strategy.     

Tensile Test Specimens with a Circumferential Precrack for Evaluation of Interfacial Toughness of Thermal-Sprayed Coatings

A new testing procedure to evaluate the interfacial toughness of thermal-sprayed coatings has been developed. The newly designed test specimen is a modification of the pin test with an artificially introduced weak interface, which is expected to open up easily under tensile loading and act as a circumferential precrack along the interface between a coating and the substrate. This configuration makes it possible to calculate the stress intensity factor K _Int at the tip of the precrack, which can be expressed as , where σ₀ is the apparent average stress, a the crack length, R the specimen radius, and F _I the geometrical correction function. Finite-element analysis was carried out to calculate the correction function F _I for various values of a/R. In the experiments, the flat surface of a pin was grit-blasted and a ring-shaped area from the periphery was covered with carbon using a pencil and set into a mating dice. SUS316L stainless steel was plasma-sprayed onto the flat surface of the pin and the dice. Then, tensile load was applied to the pin to break the weak interface containing the carbon and finally the unmodified coating-substrate interface. The load required to pull out the pin was measured for various specimen parameters such as a and R. The results indicate that the adhesion of the tested coatings can be represented by interface toughness of 1.9 ± 0.1 MPa m^1/2. As a consequence, this testing procedure can be considered as a viable method to evaluate adhesion of a thermal-sprayed coating on a substrate.