Experimental studies of 4-inch pipe whip test under BWR loca conditions

Pipe whip tests or jet discharge tests have been performed at the Japan Atomic Energy Research Institute, which simulate the instantaneous circumferential guillotine break of primary coolant piping in nuclear power plants. The present paper describes the results of the pipe whip tests using test pipes of 4 inch diameter, under the BWR LOCA conditions, which were performed from 1979 to 1981. The tests were carried out at an initial pressure of about 6.8 MPa and an initial temperature of about 285°C.The test pipe was 114.3 mm (4 in) in diameter, 8.6 mm in thickness and 4500 mm in length. The four pipe whip restraints used in the tests were the U-bar type of 8 mm in diameter and fabricated from Type 304 stainless steel. The experimental parameters were the clearance (30, 50 and 100 mm) and the overhang length (250, 400, 550 and 1000 mm).The main purpose of these tests is to investigate the effects of the clearance and the overhang length on the pipe whip behavior. It has been clarified from the test results that a smaller clearance and a shorter overhang length causes the deformation of the pipe and restraints to be minimized, and the test pipe collapses near the setting point of the restraints with the overhang length of 1000 mm.     

Low Capture Switching Activity Test Generation for Reducing IR-Drop in At-Speed Scan Testing

At-speed scan testing, based on ATPG and ATE, is indispensable to guarantee timing-related test quality in the DSM era. However, at-speed scan testing may incur yield loss due to excessive IR-drop caused by high test (shift & capture) switching activity. This paper discusses the mechanism of circuit malfunction due to IR-drop, and summarizes general approaches to reducing switching activity, by which highlights the problem of current solutions, i.e. only reducing switching activity for one capture while the widely used at-speed scan testing based on the launch-off-capture scheme uses two captures. This paper then proposes a novel X-filling method, called double-capture (DC) X-filling, for generating test vectors with low and balanced capture switching activity for two captures. Applicable to dynamic & static compaction in any ATPG system, DC X-filling can reduce IR-drop, and thus yield loss, without any circuit/clock modification, timing/circuit overhead, fault coverage loss, and additional design effort.

Structure-Based Design,Synthesis, and Biological Evaluation of Imidazo[4,5-b]Pyridin-2-one-Based p38 MAP Kinase Inhibitors: Part 2

We identified novel potent inhibitors of p38 mitogen-activated protein (MAP) kinase using a structure-based design strategy, beginning with lead compound, 3-(butan-2-yl)-6-(2,4-difluoroanilino)-1,3-dihydro-2H-imidazo[4,5-b]pyridin-2-one ( 1 ). To enhance the inhibitory activity of 1 against production of tumor necrosis factor-α (TNF-α) in human whole blood (hWB) cell assays, we designed and synthesized hybrid compounds in which the imidazo[4,5-b]pyridin-2-one core was successfully linked with the p-methylbenzamide fragment. Among the compounds evaluated, 3-(3-tert-butyl-2-oxo-2,3-dihydro-1H-imidazo[4,5-b]pyridin-6-yl)-4-methyl-N-(1-methyl-1H-pyrazol-3-yl)benzamide ( 25 ) exhibited potent p38 inhibition, superior suppression of TNF-α production in hWB cells, and also significant in vivo efficacy in a rat model of collagen-induced arthritis (CIA). In this paper, we report the discovery of potent, selective, and orally bioavailable imidazo[4,5-b]pyridin-2-one-based p38 MAP kinase inhibitors.     

Morphological and Genetic Diversities of Habenaria radiata (Orchidaceae) in the Kinki Area,Japan

Floral organs have evolved from leaves for reproduction, and the morphological analyses help to understand the plant diversity and evolution. Habenaria radiata (syn. Pecteilis radiata) is a terrestrial orchid living in wetlands in Japan, Russia, South Korea, and China. The habitats of this plant in Japan have been reduced because of environmental destruction and overexploitation, and thus it is on the Red List of Japan as a Near Threatened species. One of the three petals of the H. radiata flower is called a lip or labellum, which resembles a flying white bird, egret, or white heron, with its proposed function being to attract pollinators. To understand the diversity of H. radiata plants in different areas, we examined the lip morphology and phylogeny of populations from eight habitats in the Kinki area, Japan. The complex shapes of the lips were quantified and presented as a radar chart, enabling characterization of the morphological difference among populations. Phylogenetic analysis with microsatellite markers that we generated showed the variation of genetic diversity among populations, suggesting the different degrees of inbreeding, outbreeding, and vegetative propagation. Our approach offers a basic method to characterize the morphological and genetic diversity in natural populations.     

Progress in pressureless sintering of boron carbide ceramics – a review

ABSTRACT

Boron carbide (B₄C) ceramics has many outstanding performance, such as extremely high hardness, low density, high melting point, high elastic modulus, high thermoelectromotive force, high chemical resistance, high neutron absorption cross section, high impact and excellent wear resistance. Therefore, B₄C ceramics can be used in various industrial applications, such as lightweight ceramic armour, high temperature thermocouples, neutron absorber, reactor control rods in nuclear power engineering, polishing media for hard materials, abrasive media for lapping and grinding, and wear resistant components (blasting nozzles, die tips and grinding wheels). Pressureless sintering is the method with industrialised application value for B₄C ceramics, however, it is impossible to sinter pure B₄C ceramics to high densities without additives by pressureless sintering. So sintering additives must be used to promote the densification of B₄C ceramics. The different sintering additives used to promote the densification of boron carbide will be described in this review, including carbon additives, metallic additives, oxide additives, non-oxide additives, combined additives and rare earth oxide additives. Finally, the recent research trends for sintering methods and sintering additives of B₄C ceramics will also be proposed.     

Anisotropic structure of alkali metaphosphate glasses

Orientation anisotropy, which is well known in organic polymers with appropriate network structures, is less common in oxide glasses. We present the intermediate-range order in anisotropic alkali metaphosphate glass which consists of oriented PO₄ tetrahedral chains and intervening alkali cations along the elongation direction. The X-ray total structure factor S(Q) indicates that the inter-chain spacing depends on the size of alkali cations and varies from 5.03 to 6.28 Å. The mixed alkali effect is primarily related to an increase of the separation. The total correlation function T(r) provides the first definite evidence that the anisotropic structure is composed of phosphorus-bridging oxygen bonds (P–O_B) lying along the elongation direction and phosphorus-non-bridging oxygen bonds (P–O_T) oriented perpendicular to the elongation direction. The present result unveils fundamental aspects of the anisotropic structure of an oxide glass and provides essential information for the development of oxide glasses to control structural anisotropy.     

Metal-Coated <100>-Cut GaAs Coupled to Tapered Parallel-Plate Waveguide for Cherenkov-Phase-Matched Terahertz Detection: Influence of Crystal Thickness

The influence of crystal thickness of metal-coated <100>-cut GaAs (M-G-M) on Cherenkov-phase-matched terahertz (THz) pulse detection was studied. The M-G-M detectors were utilized in conjunction with a metallic tapered parallel-plate waveguide (TPPWG). Polarization-sensitive measurements were carried out to exemplify the efficacy of GaAs in detecting transverse magnetic (TM)- and transverse electric (TE)-polarized THz waves. The reduction of GaAs’ thickness increased the THz amplitude spectra of the detected TM-polarized THz electro-optic (EO) signal due to enhanced electric field associated with a more tightly-focused and well-concentrated THz radiation on the thinner M-G-M. The higher-fluence THz beam coupled to the thinner M-G-M improved the integrated intensity of the detected THz amplitude spectrum. This trend was not observed for TE-polarized THz waves, wherein the integrated intensities were almost comparable. Nevertheless, good agreement of spectral line shapes of the superposed TM- and TE-polarized THz-EO signals with that of elliptically polarized THz-EO signal demonstrates excellent polarization-resolved detection capabilities of M-G-M via Cherenkov-phase-matched EO sampling technique.