A carboxyalkanethiol monolayer modified electrode for blocking of ascorbic acid oxidation and its application to a biosensor

Upon the application of amperometric biosensor to the biological fluid, ascorbic acid interferes the amperometric determination of analytes, because the oxidative potential of ascorbic acid is lower than that of electro active substances such as H₂O₂ produced by the enzymatic reaction. In this study we propose a method to block ascorbic acid based on the electrostatic interaction with self-assembled monolayer (SAM) and its application of the surface modified electrode to biosensor. In order to form SAM on the gold electrode with carboxyl group, 7-carboxy-heptanethiol (7-CHT) was used. The 7-CHT modified electrode did not show anodic response to ascorbic acid, but oxidized phenanthroline cobalt complex [Co(phen)₃²⁺], which can be used as a mediator of biosensor. Thus, the 7CHT-modified electrode was applied to biosensor mediated with Co(phen)₃²⁺. Fructose dehydrogenase (FDH) was immobilized to the 7-CHT modified electrode. Fructose was determined selectively with the FDH/7-CHT modified electrode at the range of 0.2-2 mM.     

Ketones from carboxylic acids over supported magnesium oxide and related catalysts

Silica-supported alkaline earth oxides revealed excellent activity to convert acetic acid selectively into acetone in a vapor-phase fixed-bed flow system. Acetone was obtained through the cyclic formation of alkaline earth acetate followed by decomposition. Magnesium oxide should be supported on the silica surface without formation of magnesium silicate, which was inactive for the present reaction. Attempted syntheses of benzophenone and acetophenone are also described.     

Unique molecular aggregation of novel naphthalocyanine (near IR absorbing dye)

A series of organic-soluble naphthalocyanine derivatives (Y_mMNcX₄) have been synthesized. Their spectroscopic properties in organic solutions and in thin films were studied. MNcX₄ such as MNc(t-Bu)₄ (5a-5c) and MNc(On-Bu)₄ (5j) formed H-aggregates even in dilute solutions. MNc(CO₂R')₄ (5d-5i) had much stronger H-aggregation properties compared with those ofMNc(t-Bu)₄ and MNc(On-Bu)₄. Especially, MNc(CO₂R')₇ complexes (M=Cu, Pd and Ni) existed exclusively without monomers in the aggregated state even in highly dilute solutions. MNcX₄, which has strong H-aggregation properties, showed merely H- aggregate absorption maxima in thin films. In contrast, Y₂MNcX₄ (4), which has sterically hindered Y groups, showed monomerically pure characteristics in solution. However, thin films of Y₂MNcX₄ have a J-type molecular arrangement, exhibiting a red shift of Q-band absorption. The monomeric properties of Y₂MNcX₄ in solutions and J-type molecular arrangement in thin films arise from steric hindrance of two Y groups, such as R₃SiO-in Y₂MNcX₄, which prevents strong H-aggregation of naphthalocyanine.     

Graft polymerization of some vinyl monomers onto acrylic rubber. II. Mechanical properties of graft polymers

Some mechanical properties of styrene and acrylonitrile copolymers grafted onto acrylic rubber are investigated. The impact strength of graft polymers depended upon the nature and the concentration of the catalyst, the composition and the intrinsic viscosity of the rubber, and the acrylonitrile content in the rigid matrix. The most desirable result was obtained when benzoyl peroxide as the catalyst, n-butyl acrylate–acrylonitrile copolymer of 7–10% acrylonitrile content, and about 0–5% acrylonitrile in the rigid matrix were used. Dynamic mechanical tests show the increase in efficiency of rubber modification by the grafted chains. The better weathering resistance of these graft polymers, as compared with commercial ABS plastics, was confirmed.     

Back‐channel‐etched thin‐film transistor using c‐axis‐aligned crystal In–Ga–Zn oxide

Our crystalline In–Ga–Zn oxide (IGZO) thin film has a c‐axis‐aligned crystal (CAAC) structure and maintains crystallinity even on an amorphous base layer. Although the crystal has c‐axis alignment, its a‐axis and b‐axis have random arrangement; moreover, a clear grain boundary is not observed. We fabricated a back‐channel‐etched thin‐film transistor (TFT) using the CAAC‐IGZO film. Using the CAAC‐IGZO film, more stable TFT characteristics, even with a short channel length, can be obtained, and the instability of the back channel, which is one of the biggest problems of IGZO TFTs, is solved. As a result, we improved the process of manufacturing back‐channel‐etched TFTs.     

Thraustochytrid as a potential source of carotenoids

Thraustochytrids, marine protists whose dominant genera are Thraustochytrium and Schizochytrium, belong to the kingdom Chromista and are known as an industrial source of DHA. We describe here that thraustochytrid strain KH105, isolated as a DHA producer, also accumulates significant levels of β-carotene and xanthophylls including canthaxanthin and astaxanthin. A4-d cultivation using a medium composed of 10% glucose and less than 0.3% of nitrogen sources in a half-concentration of seawater gave an astaxanthin production up to 6.1 mg/L, and canthaxanthin content reached more than 10 mg/L under conditions where a higher concentration of nitrogen sources (6%) was employed. It might be advantageous in mass production systems for these carotenoids to be extracted readily by simply suspending the cells with organic solvents such as acetone and chloroform. Analyses on the morphological and life history features of the KH105 strain revealed that it belongs to the genus Schizochytrium. This particular species of thraustochytrids is thus considered to be a promising source of xanthophylls as well as DHA for use in the food industry.     

Repeatedly foldable AMOLED display

In this study, a 5.9‐inch foldable active‐matrix organic light emitting diode (AMOLED) display was developed. A folding test was performed repeatedly. The display survived the folding test (100,000 folds) with a curvature radius of 2 mm. To protect an organic light emitting diode (OLED) against moisture, inorganic passivation layers are provided on the upper and lower sides of the flexible display. Using our transfer technology, high density passivation layers can be obtained. The measured water vapor transmission rate of the layer is 7 × 10^?6 g/m²?day or less, which improves OLED reliability. With these techniques, we have developed a book‐type display, which is repeatedly foldable like a book, and a tri‐fold display including a display area, which is foldable in three.     

Enzyme-linked immunosorvent assay using vertical microreactor stack with microbeads

The advantages of vertical microreactor stack with three-dimensional (3D) structure for immunoassay are discussed. The vertical microreactor stack uses vertical fluid flow operation with multifunctional fluid filters. The multi function of fluid filter is very effective for micromixing and passive valve operation. The mechanism of micromixing is discussed by using computational fluid dynamics (CFD), and we know that the mixing mechanism based on Coanda effect. To evaluate the micromixing performance of fluid filter, we demonstrated enzyme reaction with unique repeat mixing operation. As the results, we proved that the fluid filter has very effective mixing performance. The detection limit, which demonstrated by competition enzyme-linked immunosorvent assay (ELISA), is comparable with recommended detection limit, which suggested by Japanese ministry for the environment.     

Development of an epileptic seizure prediction algorithm using R–R intervals with self-attentive autoencoder

Epilepsy is a neurological disorder that may affect the autonomic nervous system (ANS) from 15 to 20 min before seizure onset, and disturbances of ANS affect R–R intervals (RRI) on an electrocardiogram (ECG). This study aims to develop a machine learning algorithm for predicting focal epileptic seizures by monitoring R–R interval (RRI) data in real time. The developed algorithm adopts a self-attentive autoencoder (SA-AE), which is a neural network for time-series data. The results of applying the developed seizure prediction algorithm to clinical data demonstrated that it functioned well in most patients; however, false positives (FPs) occurred in specific participants. In a future work, we will investigate the causes of FPs and optimize the developing seizure prediction algorithm to further improve performance using newly added clinical data.

     

Applications of ontologies in requirements engineering: a systematic review of the literature

There is an increase use of ontology-driven approaches to support requirements engineering (RE) activities, such as elicitation, analysis, specification, validation and management of requirements. However, the RE community still lacks a comprehensive understanding of how ontologies are used in RE process. Thus, the main objective of this work is to investigate and better understand how ontologies support RE as well as identify to what extent they have been applied to this field. In order to meet our goal, we conducted a systematic literature review (SLR) to identify the primary studies on the use of ontologies in RE, following a predefined review protocol. We then identified the main RE phases addressed, the requirements modelling styles that have been used in conjunction with ontologies, the types of requirements that have been supported by the use of ontologies and the ontology languages that have been adopted. We also examined the types of contributions reported and looked for evidences of the benefits of ontology-driven RE. In summary, the main findings of this work are: (1) there are empirical evidences of the benefits of using ontologies in RE activities both in industry and academy, specially for reducing ambiguity, inconsistency and incompleteness of requirements; (2) the majority of studies only partially address the RE process; (3) there is a great diversity of RE modelling styles supported by ontologies; (4) most studies addressed only functional requirements; (5) several studies describe the use/development of tools to support different types of ontology-driven RE approaches; (6) about half of the studies followed W3C recommendations on ontology-related languages; and (7) a great variety of RE ontologies were identified; nevertheless, none of them has been broadly adopted by the community. Finally, we conclude this work by showing several promising research opportunities that are quite important and interesting but underexplored in current research and practice.