Strain selection and scale-up fermentation for FR901379 acylase production by Streptomyces sp. no. 6907

Micafungin (FK463) is a widely used treatment for life-threatening, deep-seated fungal infections. It is an echinocandin-like lipopeptide derived from the chemical modification of deacylated FR901379, a type of lipopeptide antibiotic produced by Coleophoma empetri F-11899. The palmitoyl moiety of FR901379 is deacylated by FR901379 acylase produced by Streptomyces sp. no. 6907. In this study, our goal was to generate an improved strain of Streptomyces sp. no. 6907 capable of hyperproducing the FR901379-acylase enzyme. To accomplish this goal, modified strains of Streptomyces sp. no. 6907 were generated using UV-irradiation mutagenesis, and strain selection was performed using an agar-plate screening method to efficiently select an acylase-hyperproducing strain. Three marker indices were shown to correlate with elevated acylase production: decreased candidacidal activity of FR901379, decreased proteolytic activity on skim milk, and phenotypic characteristics. Cloning and subsequent sequencing of the acylase gene from the hyperproducing mutant revealed no mutations in either the acylase structural gene or the 5'-flanking region required for gene expression. The growth medium was also modified to maximize acylase production. We successfully increased acylase activity approximately 65-fold, compared with the original growth conditions (wild strain cultured in the original unmodified medium). To minimize formation of excess foam during the fermentation process, we optimized the parameters of agitation speed, as calculated from the discharge flow rate. Using our improved strain and the optimized medium and growth conditions, we have developed an improved and highly reproducible method for stable large-scale production of FR901379-acylase.     

Molded micro- and mesoporous carbon/silica composite from rice husk and beet sugar

A molded carbon/silica composite with high micro- and mesoporosity, as well as a high bulk density, was fabricated by activating a disk-molded precursor made from carbonized rice husk (RH) and beet sugar (BS) at 875 °C in CO₂. The pore structure of the RH- and BS-based carbon/silica composite (RBC) was analysed in relation to the bulk density. An activation time of 2.0 h provided the largest BET specific surface area (1027 m²/g) and total pore volume (0.68 cm³/g) and a low bulk density (0.54 g/cm³). An RBC that was first activated for 1 h was immersed again in BS syrup and then activated in CO₂ for 1 h. This two-step activation process provided both a high bulk density (0.69 g/cm³) and a highly textured structure (BET specific surface area, 943 m²/g; total pore volume, 0.56 cm³/g). The immersion in BS syrup was useful for improving the texture without reducing the bulk density, in comparison to one-step activation for 1.0 h. The suspension of the RBCs was basic because of the residual inorganic compounds of potassium and calcium. However, the basicity of the suspension was alleviated by washing the RBCs with water.     

A comparative study of the emotional assessment of automotive exterior colors in Asia

This article compares color assessments of automotive exteriors at four locations in China, Thailand and Japan. This study employed painted panels of twelve colors, thirty sensory words and fifteen pairs of emotion variables. It also used reference figures of nine cars that included four styling categories, namely sedans, compacts, sport utility vehicles and sports cars. The results of like-dislike tests revealed that basic automotive exterior colors, such as black, white and red, were highly preferred across locations. However, geographical differences are apparent in the preference for some non-basic colors. To elucidate these geographical differences, a Chi-square test and principal component analysis were performed on the data on emotion variables. The results revealed both similarities and differences in color preferences among the four locations. Color preferences were similar in Hong Kong and Shanghai when simply evaluated by color samples. However, similar preferences for automotive exterior colors were observed in Hong Kong, Kyoto and Bangkok, but not in Shanghai. These results suggest that there is fluctuation in the emotion evoked by a color when the color is considered in the context of automotive exteriors. Therefore, this study indicates that automotive sales can be secured in the global marketplace by creating a single palette of exterior colors based on similar color preferences across countries. However, these results also indicate that preparing market-specific automotive-color line-ups can be an effective marketing strategy.     

Investigation for Necessity of Dispersivity and Tortuosity in the Dusty Gas Model for a Binary Gas System in Soil

Diffusion, dispersion, and advection are important processes in multi-gas systems in soils. To date, both Fick's model and the Dusty Gas (DG) model have been used to model the movement of gases in these systems. Dispersion is included in the dispersion-advection equation with Fick's Model for the movement of gases in gas-phase of soil, yet the movement of gases in multi-component gas-soil systems is considered to be expressed more accurately by the DG model than by Fick's model. However to date, no study has investigated the necessity of considering dispersion in the Dusty Gas (DG) model. We carried out column experiments for nitrogen-methane, nitrogen-carbon dioxide, and carbon dioxide-methane binary gas systems in sandy soil, and also did simulations on the same systems using both Fick's model and the DG model. A comparison of the results of the column experiments with our simulations confirmed that there was no need to consider the dispersion in the advection-diffusion equations with the DG model when the velocity of gas was 0.05-0.4 cm/s in Toyoura sand. Furthermore, our experiments and simulations with the DG model showed that, rather than dispersion, tortuosity should be taken into account in application of the DG model to the above condition.     

Cloning and characterization of a β-N-acetylglucosaminidase (BmFDL) from silkworm Bombyx mori

In insects, β-N-acetylglucosaminidase (GlcNAcase) participates in critical physiological processes such as fertilization, metamorphosis, and glycoconjugate degradation. Insects produce glycoproteins carrying paucimannosidic-type N-glycans, the terminal GlcNAc residue of which is cleaved by a GlcNAc-linkage specific GlcNAcase, also known as the fused lobes (FDL) protein. To obtain information on the structure of GlcNAcases and insight into their contribution to physiological processes, we cloned Bombyx mori FDL (BmFDL) from silkworm larvae. The full-length cDNA (1.9 kb) encoded a protein of 633 amino acids with 42% amino acid sequence identity to Drosophila melanogaster FDL (DmFDL). Recombinant BmFDL cleaved only β-1,2-linked GlcNAc residues from the α-1,3 branch of biantennary N-glycan. This substrate specificity was similar to that of DmFDL. Microsomal FDL activity was inhibited by anti-BmFDL antibodies. Taken together, our results suggest that BmFDL is a N-glycan-processing GlcNAcase in B. mori.     

Development of rapid hygrothermal pasteurization using saturated water vapor

We developed a novel rapid hygrothermal pasteurization (RHP) method using saturated water vapor with a dew point of 100 °C. In the present study, the effects of RHP on microbiological quality and quality attributes such as color changes, firmness and ascorbic acid content on many fresh-cut fruits and vegetables (cabbage, cucumber, carrot, cherry tomato, bell pepper, strawberry, pineapple and melon) were investigated. The RHP was performed within a second by free-falling samples through a cylindrical processing chamber filled with steam. The RHP resulted in a 0.7–2.0 log order reduction in the numbers of naturally inoculated mesophilic bacteria. Furthermore, the RHP induced no significant changes in color and firmness of samples, except on the leafy vegetable, cabbage. Ascorbic acid was also retained approximately 80% and above. These results indicate that the RHP is a clean and effective method for decontaminating mesophilic bacteria on fresh fruits and vegetables with minimal changes in quality.Industrial relevanceIn fresh-cut industry, an effective and risk-free decontamination technology is required for use in place of a conventional method, washing by chlorine that can produce carcinogenic chlorinated by-products. In this study, the rapid hygrothermal pasteurization (RHP) method using saturated water vapor was invented and their ability for applying minimal processing was evaluated. The results showed that RHP, without using chemicals, can reduce microorganism load and preserve quality attributes in many kinds of fresh-cut fruits and vegetables. Therefore, RHP could be used as a novel method, which can be generally applicable to fresh-cut fruits and vegetables in the food industry.     

直流分量电流作CV电缆老化诊断方法的现场运用探讨

介绍在实际敷设电缆时如何有效消除杂散电流以期提高直流分量电流进行ＣＶ电缆老化监测的测试精度。     

Nonlinear model for an optical read-only-memory disk readout channel based on an edge-spread function

A point-spread function (PSF) is commonly used as a model of an optical disk readout channel. However, the model given by the PSF does not contain the quadratic distortion generated by the photo-detection process. We introduce a model for calculating an approximation of the quadratic component of a signal. We show that this model can be further simplified when a read-only-memory (ROM) disk is assumed. We introduce an edge-spread function by which a simple nonlinear model of an optical ROM disk readout channel is created.     

Multimouth surfaces for synthetic actor animation

Most parts of the human body are cylindrical in shape. Generalized cylinders, with two cross-sectional openings, are a logical choice to represent these cylindrical shapes. However, a variety of human body regions can be visualized as surfaces with multiple openings or multimouth (MM) surfaces. Some examples of such surfaces are the pelvis, the chest, and the palms of the hands. We investigated the suitability of non-uniform rational B-spline (NURBS) formulation for creating multimouth surfaces. Two techniques, the surface wrapping model and the garland model, are presented.