Mixing in processing of thermoplastics by extrusion

Translated from Khimicheskoe i Neftyanoe Mashinostroenie, No. 8, pp. 9–11, August, 1993.     

Reduction of loading effect by tungsten etchback in a magneticallyenhanced reactive ion etcher

The plug loading effect occurring during the etchback of tungsten was investigated in a magnetically enhanced reactive ion etcher using SF ₆/Ar mixtures. It was found that while the plug loading effect is independent of varying SF₆/Ar flow rate ratio and magnetic field intensity, it is reduced under the condition of high selectivity of tungsten relative to TiN which was achieved at high chamber pressure and low RF power. It is proposed that when TiN is used as a glue layer, the W etch rate enhancement in the plug is mainly controlled by a local loading effect. Under the optimized etchback conditions the plug loss was successfully controlled without the tungsten residue left on severe topology     

The prospects of non-volatile phase-change RAM

Phase-change read-and-write memory (PRAM) is a promising memory that can solve the problems of conventional memory—scalability, read/write speed, and reliability. We will review the opportunities and technical challenges of PRAM. The most important challenge of PRAM is the reduction of the writing current. Various approaches to reduce the writing current will be reviewed and the prospects of PRAM are discussed.     

Complete joint weight enumerators and self-dual codes

We define the complete joint weight enumerator in genus g for codes over /spl Zopf//sub 2k/ and use it to study self-dual codes and their shadows. These weight enumerators are related to the theta series of the associated lattices and Siegel and Jacobi forms are formed from these series.     

Test Technology Technical Council Newsletter

This newsletter provides information on past and upcoming events related to the IEEE Computer Society's Test Technology Technical Council and the test community.     

Possibility of sewage and combined sewer overflow reuse with biological aerated filters.

The secondary effluent from municipal plants in Korea generally represents higher BOD with lower SS. Therefore, more soluble forms of organics and NH4-N need to be removed to improve its effluent for reuse. In this study reuse possibility of secondary effluent and CSO (combined sewer overflow) using BAF (biological aerated filter) was evaluated. The tertiary application with 1.2 h EBCT, SS, BOD and COD showed stable concentrations less than 1.3, 1.3 and 6.2 mg/L, respectively. Nitrogen could be nitrified even at 7 degrees suggesting BAF can be used for a water reuse method as well as an effective add-on facility in cold regions. However, BAF was not stable with CSO application at increased flow rates suggesting CSO must be equalised prior to application. Disinfection was necessary even during normal weather conditions.     

An enhanced zone 3 algorithm of a distance relay using transient components and state diagram

Zone 3 of a distance relay is used to provide the remote backup protection in case of the failure of the primary protection. However, the risk of maloperation under stressed conditions such as heavy loading, voltage, and transient instability is quite high. Zone 3 is used in combination with the derivatives of the voltage and current, etc. to prevent maloperation. At times, the impedance characteristics that restrict the tripping area of relay are used to avoid maloperation due to load encroachment. This work presents a novel zone 3 scheme based on combining the steady-state components (i.e., 60 Hz) and the transient components (TCs) using a state diagram that visualizes the sequence of studies that emanate from the sequence of events. The simulation results show that the novel zone 3 distance relay elements using the proposed method operate correctly for the various events.     

Validation of 3-D curved objects: CAD model and fabricatedworkpiece

This paper proposes a new method to describe and identify a 3-D curved object for the purpose of validating a fabricated object to the design specification. Curved 3-D objects are, in general, difficult to represent and identify because they lack distinct properties such as edges, planes, or cylindrical surfaces which are the building blocks in representing objects. In this paper, the authors propose to use principal axes of a 3-D object to establish a reference for the representation. A method of obtaining an inertia matrix from a 3-D range image is developed. The unique set of principal axes is obtained from the inertia matrix of an object with an arbitrary 3-D position and orientation, and the object can be described uniquely on these principal axes. On the principal axes, an object is described by a set of features describing the shape of the object such as spine, section size, section orientation, and section contraction. The features are used for comparing two objects for the validation purpose. The authors also propose a direct measure of similarity between two objects as a mean-squared difference of radii. As an experiment, two 3-D object models are designed through a CAD package, and fabricated objects are compared with the designed models for validation purposes