Lipase-catalyzed synthesis and characterization of flaxseed oil-based structured lipids

The biosynthesis of structured lipids (SLs) was carried out by the interesterification of flaxseed oil (FO) and tricaprylin (TC) in an organic solvent medium (OSM), using selected commercial lipases, including Amano DF, Novozym 435, Lipozyme TL-IM and Lipozyme RM-IM. The fatty acyl chains of the synthesized triacylglycerols (TAGs) were identified by atmospheric pressure chemical ionization/mass spectrometric (APCI/MS) analysis, while the fatty acid positional distribution of the MLM- and MML-SLs (M-medium and L-long chain fatty acids) was determined by silver-ion high-performance liquid chromatographic (Ag⁺/HPLC) analysis. The effects of reaction temperature (T_r, 30–50 °C), enzyme concentration (E_c, 0.5–4%, w/v), initial water activity (a_w, 0.05–0.43) and reaction time (R_t, 0–72 h) on the efficiency of the enzymes, were studied. The bioconversion yield (%) of the synthesized MLM- and MML-SLs was monitored under the established reaction parameters for each lipase. The maximum yield of MLM-SLs was obtained in the order, of Novozym 435 > Lipozyme TL-IM > Lipozyme RM-IM > Amano DF. Moreover, considering the ratio of the MLM- to MML-SLs produced by each enzyme, Novozym 435 and Lipozyme TL-IM were selected as the most effective enzymes for interesterification of FO and TC.     

Power generation potential of liquified natural gas regasification terminals

The share of liquified natural gas (LNG) in the international trade of natural gas (NG) is continually increasing. This presents increasing opportunities to build power plants to generate electricity at LNG regasification terminals rather than wasting the power generation potential of LNG at about −162°C by regasifying it by seawater, ambient air, or by burning NG. Typically, over 5% of the NG received at LNG plants is used to liquify the remaining incoming gaseous NG at environmental conditions. Theoretically, all the energy consumed at LNG liquefaction plants can be recovered at LNG regasification terminals. In this study, the theoretical and practical power generation potential of regasified LNG is investigated by performing energy and exergy analyses. It is shown that up to 0.191 kWh of electric power can be generated during the regasification of LNG per standard m³ of NG regasified. The potential economic gains associated with power generation at LNG regasification facilities are demonstrated by analyzing the 2018 LNG imports of Turkey as a case study and the world. It is shown that the 314 million tons of LNG imported globally in 2018 has the electric power generation potential of 88 billion kWh with a market value of over 10 billion USD. It also has the potential to offset 38 million tons of CO₂ emissions.     

Combustion of jojoba methyl ester in an indirect injection diesel engine

An experimental investigation has been carried out to examine for the first time the performance and combustion noise of an indirect injection diesel engine running with new fuel derived from pure jojoba oil, jojoba methyl ester, and its blends with gas oil. A Ricardo E6 compression swirl diesel engine was fully instrumented for the measurement of combustion pressure and its rise rate and other operating parameters. Test parameters included the percentage of jojoba methyl ester in the blend, engine speed, load, injection timing and engine compression ratio. Results showed that the new fuel derived from jojoba is generally comparable and good replacement to gas oil in diesel engine at most engine operating conditions, in terms of performance parameters and combustion noise produced.     

A complementary study on novel PdAuCo catalysts: Synthesis,characterization, direct formic acid fuel cell application,and exergy analysis

At present, Pd containing (10–40 wt%) multiwall carbon nanotube (MWCNT) supported Pd monometallic, Pd:Au bimetallic, and PdAuCo trimetallic catalysts are prepared via NaBH₄ reduction method to examine their formic acid electrooxidation activities and direct formic acid fuel cell performances (DFAFCs) when used as anode catalysts. These catalysts are characterized by advanced analytical techniques as N₂ adsorption and desorption, XRD, SAXS, SEM-EDX, and TEM. Electronic state of Pd changes by the addition of Au and Co. Moreover, formic acid electrooxidation activities of these catalysts measured by CV indicates that particle size changes in wide range play a major role in the formic acid electrochemical oxidation activity, ascribed the strong structure sensitivity of formic acid electrooxidation reaction. PdAuCo (80:10:10)/MWCNT catalyst displays the most significant current density increase. On the other hand, lower CO stripping peak potential obtained for PdAuCo (80:10:10)/MWCNT catalyst, attributed to the awakening of the Pd-adsorbate bond strength down to its optimum value, which favors higher electrochemical activity. DFAFCs performance tests and exergy analysis reveal that fuel cell performances increase with the addition of Au and Co which can be attributed to synergetic effect. Furthermore, temperature strongly influences the performance of formic acid fuel cell.     

Photolytic and free‐radical polymerization of monomethyl maleate esters of epoxidized plant oil triglycerides

Epoxidized soybean oil (ESO) was reacted with monomethyl maleate with AMC‐2 catalyst. Monomethyl maleate was found to react with 65% of the available epoxy groups to give the monomethyl maleic esters of ESO (MESO). ¹H‐NMR, ¹³C‐NMR, and IR spectra of the new derivative confirmed the proposed structure. The NMR spectra revealed that the average number of monomethyl maleate groups per triglyceride molecule was 2.6. MESO was photopolymerized with ultraviolet light and was free radically homopolymerized and copolymerized with styrene (STY), vinyl acetate (VA), and methylmethacrylate (MMA). MESO was also reacted with maleic anhydride at the newly formed hydroxyl groups to give maleinized MESO, (MESOMA), which now contained 4.9 maleate unsaturations per triglyceride. Dynamic mechanical analysis revealed the dynamic modulus for styrene copolymers of MESO and maleinized MESO as 105 and 140 MPa, respectively. Both of these plant oil derived monomers are good candidates for a practical and economical liquid molding resin. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 103: 626–633, 2007     

Lipase-catalyzed transesterification of trilinolein or trilinolenin with selected phenolic acids

The enzymatic transesterification of selected phenolic acids with TAG, including trilinolein (TLA) and trillinolenin (TLNA), was investigated in an organic solvent medium. Maximal bioconversion of 66% was obtained with a dihydrocaffeic acid (DHCA) to TLA ratio of 1∶2 after 5 d of reaction. Similarly, the highest bioconversion of 62% was obtained with a DHCA to TLNA ratio of 1∶2, but after 12 d of reaction. However, a ratio of 1∶4 DHCA/TLA decreased the bioconversion to 53%. Transesterification reactions of ferulic acid with both TAG, using a ratio of 1∶2, resulted in low bioconversion of 16 and 14% with TLA and TLNA, respectively. The overall results indicated that bioconversion of phenolic MAG was higher than that of phenolic DAG. The structures of mono- and dilinoleyl dihydrocaffeate as well as those of mono- and dilinolenyl dihydrocaffeate were confirmed by LC-MS analyses. The phenolic lipids demonstrated moderate radical-scavenging activity.     

Investigation of the effects of geometrical parameters on heat transfer from buried finned pipes

Heat transfer from finned pipes buried in the soil has been investigated using experimental, analytical and numerical techniques. The experimental setup consists of a ground source heat pump system and two separate ground heat exchangers. Constant surface temperature approach based on Carslaw and Jaeger’s theory study was used for calculating the heat transfer from the pipes analytically. The problem was modeled and solved using a CFD program numerically. Effects of the fin number, fin length and simulation time on the heat transfer rate have been investigated and compared with bare tube. A modified analytical formula was also proposed for finned pipes in this study.     

Vitamin E inhibits fish oil-induced hyperlipidemia and tissue lipid peroxidation in hamsters

Previous research has linked hyperlipidemia with increased serum concentrations of lipid peroxidation products; however, a specific association between diet-induced oxidative stress and hyperlipidemia has not been studied. In the present study, the relationship between tissue lipid peroxidation and hyperlipidemia induced by ingestion of fish oil was examined. In Experiment 1, male Golden Syrian hamsters were fed semipurified diets composed of 1.6 wt% safflower oil plus 15.0 wt% of either butterfat (BF), safflower oil (SAFF), or high-cholesterol menhaden oil [MHO(H-CHOL)] semipurified diets for 27 d. The cholesterol contents of the diets were adjusted to 0.088%. The MHO(H-CHOL)-fed hamsters exhibited higher serum concentrations of total cholesterol, triglycerides, apolipoprotein B, and lipid peroxides when compared to the BF and SAFF diet groups. In a further study (Experiment 2), hamsters were fed for 27 d three dietary treatments: (i) MHO(H-CHOL) with no vitamin E content; (ii) a low-cholesterol menhaden oil containing high concentrations of vitamin E (2.5 mg tocopherol/g oil or dietary concentrations of 375 mg/kg) [MHO(L-CHOL)+E]; and (iii) the MHO(L-CHOL+E) with added cholesterol (595 mg/kg) [MHO(L-CHOL)+CHOL+E] to match the cholesterol content of the MHO(H-CHOL). The MHO(L-CHOL)+E and MHO(L-CHOL)+CHOL+E diet groups showed lower concentrations of serum cholesterol, triglycerides, and hepatic lipid peroxides than the MHO(H-CHOL)-treated group. Moreover, in contrast to the hypercholesterolemia caused by the MHO(H-CHOL) feeding, the MHO(L-CHOL)+E and MHO(L-CHOL)+CHOL+ E diets did not show a serum cholesterol-elevating action. This study supports the hypothesis that oxidative stress in the Syrian hamster could play a causal role in dietary-induced hyperlipidemia which can be inhibited by high vitamin E intake.     

Low Breakdown Voltage Varistors by Grain Boundary Diffusion of Molten Bi2O3 in ZnO

Diffusion of molten Bi₂O₃ into the grain boundaries of sintered, alumina-doped (0.23 and 0.7 mol%) ZnO pellets resulted in varistors with breakdown voltages in the 3–5 V range and nonlinearity coefficients of 10–24. The varistors were fabricated by spreading a thin layer of Bi₂O₃ powder on the surface of ZnO pellets and heating the combination to various temperatures (860–1155°C) and different times. The highest nonlinearity coefficients (20–24) and lowest breakdown voltages (3–5 V) were recorded in samples annealed at 860°C for 35 min. Longer annealing times and/or higher temperatures resulted in progressively higher breakdown voltages. Eventually the devices became insulating, which was attributed to the formation of an insulating Bi₂O₃ layer between the grains. Separate wetting experiments have shown that the penetration of Bi₂O₃ into ZnO grain boundaries was a strong function of alumina doping —the penetration rate was decreased by a factor of 5–7 as the ZnO was doped with as little as 0.2 mol% alumina. It is this slowing down of the penetration of the ZnO grain boundaries that is believed to be critical in the development of the low breakdown voltages observed.